Rated 4.5 out of 5Â by 60
Rated 1 out of 5Â by Rico Poor quality and design
Two main issues I had with this:
1) The quality of the materials used in the manufacturing process is substandard in my opinion. The wall plate was barely thicker than a piece of foil. They assume you have a junction box to attach to which I didn't so I used my own toggles because the two they provided would have had this thing on the floor within an hour.
2) Wiring was the easiest task but once I tried to attach the lights to the wall plate, their "Ball Nut" only screws in maybe 1/4" so it leaves a big gap behind the unit and doesn't snug to the wall - see photos.
I should probably take them back (we'll see what the wife's reaction is when she returns from vacation) and order something more substantial although there is not guarantee that paying double or more will increase the quality and workmanship any more. Hampton Bay should stick to ceiling fans which I just installed two of.
July 15, 2014
Rated 5 out of 5 looks good
LOOKS GREAT AND VERY BRIGHT EASY TO INSTALL THE DESIGN IS VERY NICE
March 5, 2013
Rated 4 out of 5Â by MissChristmas Fantastic!!
I love this vanity light! It makes my master bathroom look gorgeous! I bought four 60 watt bulbs for this & that's plenty bright enough. I would suggest that you also purchase silicone to put around the edges because I didnt trust the screws that came with it & didn't want it to fall. Also this is a 2 person project. You cannot install this alone.
Overall for a 1st time homeowner myself, this is a great do it yourself project!
October 5, 2014
Rated 3 out of 5Â by PDBoston Quality is average, looks nice
What you see is what you get. It looks nice. But it really needs to have the wall mount holes closer to the top of the bracket, to help hold the weight of the light. I would recommend adding a few other holes/anchors in order to hold it tighter against the wall to eliminate a gap from the wall at the top of the fixture
As with a few other reviews I read, one of the ball nuts did not have any threading. A MAJOR annoyance to discover after most of the hardware has been mounted. Will go back to the store to see if it can somehow get swapped without the entire fixture.
December 31, 2013
Rated 4 out of 5Â by JonBoy This is a nice looking fixture, Looks better than the picture on the site or the box.
First thing throw away the cheap hammer in mollys that come with the mounting kit, use quality self drilling screw in mollys. use the mouning plate as your template and use a level. Add a couple of mollys one on each end toward the top for additional support. overall ease of mounting was easy, the mounting plate could of been a little stiffer or thicker to reduce the flex of the light hence the need for extra mollys and screws. I used 40 watt Cree LED bubs for the light super bright and no heat or power waste. I highly recomend this product make sure you remove from the box in an area easy to clean the syrofoam in the box is cheap and it gets every where, card board packing is more green and is easier to despose.
March 19, 2014