Model # SL-4133-OR

Internet #202051474

Store SKU #440186

Hampton Bay Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern
0016963413320

Hampton Bay

Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern

  • Oil rubbed bronze finish, clear glass
  • Metal housing
  • 30 ft. motion detection range
$44.97 /each

Frequently Bought Together

Product Overview

The Shaker Cove Mission 150 Degree Motion-Sensing Outdoor Lantern has seeded glass panels in a metal housing that has an oil-rubbed bronze weather-resistant finish. It detects motion up to 30 ft. away and is California Title 24.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

16 Questions27 Answers

Customer Questions & Answers

Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern
Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Does it work with a 60W LED bulb? Why do none of them appear to work with LEDs?

This question is from Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern
Asked by
Cypress, mCA
Read all my Q&A
June 29, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Littleton, CO, USA
Read all my Q&A
February 10, 2016
Answer: 
I works fine with LED bulbs, but you should make sure you use the dimmable ones.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
hinsdale, Nh
Read all my Q&A
Home Improvement Profile: Professional
February 10, 2016
Answer: 
Good question the light I purchased has a 60watt daylight LED bulb which draws I think 14watts I think and it works fine. I haven't had any issues with it and its bright
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
Orange, Ca.
Home Improvement Profile: Other
June 30, 2014
Answer: 
Hi J6801, I contacted the manufacture to inquire about you question.
The manufacture stated that this product was designed only for incandescent or halogen light bulbs. Although there is not many on the HD web there are some. Here is a link to the web product page.
http://www.homedepot.com/s/LED%2520motion%2520sensor%2520lantern?NCNI-5
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Setting the "Dusk to Dawn" position.

This question is from Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern
Asked by
Joe
Gautier, Ms
October 11, 2012
How do I set the dusk to dawn position on the Model SL 4133 OR???
I don't find a "Manual" position. It has 'Test, 1,5,10 Min. Is the Min supposed to be the Manual?????
I just want that it works from Dusk To Dawn.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
MARYLAND
Read all my Q&A
January 3, 2014
Answer: 
i guess if you want it on all night , u need to set it on TEST
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
Kennewick, WA, USA
Read all my Q&A
September 24, 2013
Answer: 
Set it on 10 min and I have the sensitivity on high. Turn the light off for a second then back on. If the motion comes on turn the light back off for a second. Every time you turn the light off it will switch to either motion or dusk to dawn.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Read all my Q&A
October 16, 2012
Answer: 
This light fixture does not have a dusk to dawn setting available. The operating times are 1, 5 or 10 minutes. The photo control located on the fixture ensures that it only operates at night.
-3points
2out of 7found this answer helpful.
Was this helpful?helpful2unhelpful5
 
2 answers

How do I set the manual overide switch to allow the unit to be controlled by the switch?

This question is from Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern
Asked by
Scarborough, ME
Read all my Q&A
December 2, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
hinsdale, Nh
Read all my Q&A
February 10, 2016
Answer: 
most you flip inside light off then on quickly and it sets it to override
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Orange,Calfornia
Read all my Q&A
Home Improvement Profile: Professional
December 6, 2014
Answer: 
With most fixtures that have a motion sensor included with them, you would simply turn your light switch controlling the fixture on and off twice rapidly to give it the manual override.
Joseph
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
2 answers

Where is the manual override located.

This question is from Shaker Cove Mission 150 Degree Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern
Asked by
Mineral Ridge, Ohio
Read all my Q&A
October 30, 2014
I would like to be able to turn these lights off and on with the switch only. The lights were purchased by me but installed by a crew that was siding my house. They threw away the directions. I have no way of finding the Manual Override
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
September 6, 2016
Answer: 
There are two adjustment switches on the base, pretty straight forward
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Read all my Q&A
November 4, 2014
Answer: 
You can view the complete manual online at the following link if helpful. Enter your model # of
SL-4133-OR and search. The manual will then be accessible.
http://www.heath-zenith.com/servsup_manual.cgi
Included below are a few clips in case helpful.
Manual mode only works at night because daylight returns the sensor to AUTO. Flip the light switch off for one second then back on to toggle between AUTO Read More
You can view the complete manual online at the following link if helpful. Enter your model # of
SL-4133-OR and search. The manual will then be accessible.
http://www.heath-zenith.com/servsup_manual.cgi
Included below are a few clips in case helpful.
Manual mode only works at night because daylight returns the sensor to AUTO. Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE. Manual mode works only with the on time switch in the 1, 5, or 10 position. If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.
Also, if you have further questions, our tech service team is glad to assist and can be reached at 800-858-8501. Thanks for your question! Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-10-31 T00:06:53.453-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202051474, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.9 out of 5 by 63 reviewers.
Rated 3.0 out of 5.0 by Replacement of failed outdoor lamp This is a replacement for the similar model light I purchased about four years back. I installed that light and it functioned correctly for several years I believe the photo cell was failing as it came on during the daytime with motion. It failed to activate recently with motion at any time. I'm giving it another try with the new same model lamp as it matches the other lamps I installed on the outside of my house. October 18, 2016
Rated 1.0 out of 5.0 by Do Not Buy!!! I brought this light years ago and the sensor was not great but worked. I had to replace it and brought another one of the same model thinking maybe I just had bad luck the first time. I had hoped the technology had been improved and would have better results. That was not the case the second one was worst sensor failed within a matter of days.. I paid to have it installed and now will have to pay again. Please do not make the same mistake that I did. I'm very disappointed in this product! I had hoped for better and should have checked reviews. October 4, 2016
Rated 4.0 out of 5.0 by Handsome Looking Light Very nice looking with the seeded glass. I'm using a clear, 40w appliance bulb in it. Straight-forward installation and easy to set up. It's a bit too small in scale for my covered front porch application but I could live with that if it weren't SO DARN SENSITIVE. I have it set at the least sensitive setting for 1 minute but it still goes on and off constantly most of the night. I tried adjusting the sensor on the top of the fixture but it doesn't help. It's been 2 weeks now and I can't take it any more so I've purchased and will be installing another light with the motion sensor at the the bottom of the fixture. Hopefully that one will work better and I will install this one at my daughters' on her back porch where she could use the extra sensitivity. September 20, 2016
Rated 5.0 out of 5.0 by TO REPLACE SAME ONES THAT HAD RUSTED E.Z. TO INSTALL , GREAT LOOK , WORKS WELL , COMES ON AUTO. October 18, 2016
Rated 1.0 out of 5.0 by Poor design AND motion sensor doesn't work The light looks great, but that is where the positives end. Firstly, the mount and hardware are designed poorly. the head of the bolts prevents the mount from being anything close to flush. Unless you want water to poor into the back of your light, you will need a large amount of silicone. The second bigger issue is that the motion sensor does not work. The light will either turn on and then stay on permanently, or it won't turn on at all, no matter how many jumping jacks you do in front of it. I have tried all the settings, but I can't figure it out. I have installed a half dozen other motion sensing lights around my property and they all work. This one is a dud and is getting returned. September 3, 2016
Rated 3.0 out of 5.0 by Not So Great Motion Sensor The installation of this motion sensing light was easy. But the light doesn't come on quickly when there is obvious motion, even on the most sensitive setting. Disappointing. September 27, 2016
Rated 3.0 out of 5.0 by Best painted outdoor fixture Not really rubbed bronze, just painted. ANd remember you can install it in the day but cannot adjust it until dark! Needs a gasket to mate to the mounting surface as the securing bolt heads protrude so the base rocks and you need a lot of caulk to seal it. September 6, 2016
Rated 5.0 out of 5.0 by Outdoor Oiled Rubbed Bronze Motion-Sensing Lantern Very easy to install and looks great! A very good value for this product. August 30, 2016
  • 2016-10-30 T22:26:21.177-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_63, tr_63
  • loc_en_US, sid_202051474, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 71ms
  • REVIEWS, PRODUCT