0750298000038

Model 832777

Internet #202046928

Store SKU #832777

Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)

$7.95 /piece
  • Smooth and ideal for various applications
  • Can be glued or fastened to a wall or other products
  • Hardboard surface is free of common wood defects

Frequently Bought Together

Product Overview

Hardboard has a high internal bond, exceptional stability, and smoothness ideal for paneling, furniture, fixtures, toys, general manufacturing, and applications where painting or die cutting is required. Hardboard is used in a variety of applications including furniture components, wall paneling, underlayment, interior trim and perforated boards. It resists marring, scuffing and abrasion, as well as changes in temperature and humidity.

California residents: see   Proposition 65 information

  • Hardboard can be used in many applications
  • The hardboard surface is smooth and free of common wood defects
  • Hardboard has a uniform thickness, density and appearance and has no grain
  • Hardboard can be securely glued or fastened with screws, staples or nails
  • Note: Product may vary by store
  • Click to learn how to select the right lumber for your project

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

53 Questions38 Answers

Customer Questions & Answers

Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)
Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Can I use this on top of wooden slats in a bed frame?

This question is from Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)
Asked by
Read all my Q&A
September 6, 2015
My mattress needs less than 2inch gap between slats in the bed frame. Currently the gap is closer to 3 inch. i thought a sheet of the hard board could do the trick. Can it?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Philadelphia, PA
Read all my Q&A
Home Improvement Profile: DIYer
December 20, 2015
Answer: 
I actually have never seen 1/8 - inch hardboard used for anything other than bottoms of small drawers. In my previous answer, I was thinking of 1/4 inch hardboard.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Philadelphia, PA
Read all my Q&A
Home Improvement Profile: DIYer
December 20, 2015
Answer: 
I bought bunk beds for my son. It had a thin hardboard on top of the slats, and the hardboard did sag after a few years. But I forget how many slats there were. So your answer depends on how heavy the person is, and what kind of mattress. Most likely it would work fine with only a 3-inch gap between slats.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

September 9, 2015
Answer: 
Yes, this product can be used to close the gap between slats.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
 
2 answers

Can we use over sub floor?

This question is from Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)
Asked by
illinois
Read all my Q&A
March 16, 2016
We are taking up some marble tile and pieces of the sub floor is coming up with it! We really cant afford to put a whole new sub floor. Could we use this on top off sub-floor before we put down Engineered flooring?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Kentucky
Read all my Q&A
April 26, 2016
Answer: 
Rob,
You would be better off using Lauan (http://www.homedepot.com/p/Underlayment-Common-7-32-in-x-4-ft-x-8-ft-Actual-0-196-in-x-48-in-x-96-in-431178/203183010). It's only $2 more a sheet. It is stronger, and will hold up much better, especially if the chunks that are coming out of your subfloor are somewhat large.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

March 17, 2016
Answer: 
Yes, you can use the tempered panel over sub floor.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
 
2 answers

can I use this as floorboards for an attic ? Im looking for something lightweight yet structurally supportive. ?

This question is from Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)
Asked by
el monte, california
Read all my Q&A
July 12, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Arizona
Read all my Q&A
Home Improvement Profile: DIYer
November 20, 2014
Answer: 
No. This material is not thick enough to provide suitable support for a flooring application.
+8points
8out of 8found this answer helpful.
Was this helpful?helpful8unhelpful0

Asked by
Atlanta GA
Read all my Q&A
Home Improvement Profile: Professional
July 16, 2014
Answer: 
Hey jack,
No, using hardboard is a very poor choice for floorboards, even if it is an attic and infrequently used.
It's too thin and not as moisture resistant as even sanded plywood.
I'd recommend to use at least 3/8" thick boards to place and screw them directly to the joists.
Joseph
+10points
11out of 12found this answer helpful.
Was this helpful?helpful11unhelpful1
 
1 answer

Is it possible to waterseal this hardboard?

This question is from Hardboard Tempered Panel (Common: 1/8 in. 4 ft. x 8 ft.,; Actual: 0.115 in. x 47.7 in. x 95.7 in.)
Asked by
Midwest
Read all my Q&A
July 18, 2016
Project is to build a trailer for a bicycle suitable for hauling groceries, which may encounter water if it rains in transit, or if there is moisture on the pavement for any reason. Thanks.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 19, 2016
Answer: 
Hello SteveErwen,
No, this product can not be sealed. Better to use a product like FRP.
Thank you for your inquiry.
Charlotte of the Home Depot Community.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 »
  • 2016-08-23 T13:51:06.482-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202046928, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 122ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.4 out of 5 by 5 reviewers.
Rated 2.0 out of 5.0 by Big ugly sticker won't come off of smooth side The hardboard itself is fine, but who the heck decided to put a big, non-removable product code sticker on the smooth side (one of my pet peeves)? My purpose in buying the hardboard was to make a protective cover for a table on which I do hobby work. I scraped at the sticker for 5 minutes and barely got 10% of it off, and where it came off there is goo from the sticker. I don't dare use solvent on it for fear of delaminating the hardboard. Why not put the sticker on the back? Dumb! January 14, 2016
Rated 5.0 out of 5.0 by Perfect for auto upholstery I was looking for replacement material for the door cards in my classic car. After looking at the available material the upholstery shops carry I found this hardboard at a much more reasonable price. It is exactly the same thickness and texture as the original hardboard panels removed from the car. It cuts and drills easily and holds staples well. Contact adhesive takes two coats to adhere well but the material is basically wood so it will soak up the first coat of anything applied to it. I am pleased with the results and will definitely use this material again. The only downside I can mention is the material is very messy when cut. It creates a very fine dust so wear a respirator or at the very least a mask when cutting or drilling. November 20, 2014
Rated 5.0 out of 5.0 by Great product for our needs We used this to protect a highly finished epoxy concrete floor during an installation. Layed it over protective plastic then taped the seams with 4" wide tape. Held up fine with 10,000 lb. forklifts and cranes running over it for 2 weeks, no breaks or rips. This material is textured on one side and smooth on the face. We went face up. Also shopped Lowe's and their product is slick on both sides and seemed cheap by comparison. October 14, 2015
Rated 1.0 out of 5.0 by this isn't as good as i thought it would be i didn't really like it. i actually had no idea it would look as ugly as did when i got it in. November 13, 2013
Rated 4.0 out of 5.0 by Great for protecting a floor during remodel. Great for protecting a hardwood floor during remodel of ceiling. February 27, 2013
  • 2016-08-18 T13:41:16.493-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_202046928, prod, sort_default
1-5 of 5
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT