Model # SL-6030-WH5

Internet #100654963

Heath Zenith 180 Degree Wireless Motion Sensor
0016963603011

Discontinued Heath Zenith

180 Degree Wireless Motion Sensor

Frequently Bought Together

Product Overview

The Heath Zenith Wireless Command, SL-6030-WH Wireless 180 degree motion sensor adds new flexibility to motion activated lighting. This sensor can be placed anywhere up to 100 ft. away from Heath Zenith Wireless Command receivers to remotely activated lights. Add more than one sensor to increase the motion coverage in other areas in and around your home. The sensor features a wide 180-degree motion detection angle that detects motion up to 70 ft. away and has a selectable 1 or 5 minutes light timer. Choose for the sensor to detect motion day and night or at night only. This sensor can be used indoor or outdoor and requires 2 AA batteries, not included.

  • No wiring required
  • Detects motion up to 70 ft. away
  • Selectable night only or day/night motion detection
  • Mounts anywhere inside or outside

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions7 Answers

Customer Questions & Answers

180 Degree Wireless Motion Sensor
180 Degree Wireless Motion Sensor

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 180 Degree Wireless Motion Sensor
 
5 answers

The Heath Zenith 180 Degree Motion Sensor-Model SL6030 is only pictured in the description,is there another part that screws into the light socket ?

This question is from 180 Degree Wireless Motion Sensor
Asked by
Hombrelibre
Houston, TX
May 20, 2012
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (5)

Asked by
Clinton IL
Read all my Q&A
Home Improvement Profile: DIYer
July 15, 2014
Answer: 
The SL6030 is for the sensor only. I think you be talking about this. http://www.homedepot.com/p/Heath-Zenith-Motion-Activated-Lamp-Sockets-Control-SL-6026-WH/100654956
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Washington, USA
Read all my Q&A
November 12, 2013
Answer: 
The Heath Zenith 180 Degree Motion Sensor-Model SL6030 is a replacement for the same unit that accompanied the flood light package bought previously. The flood lights themselves have receivers built into them that are programmed to respond to the sensor.
Also, at my house the sensor is out side in the weather all the time and failed after a couple years of service, which was no surprise. With the hope I
Read More
The Heath Zenith 180 Degree Motion Sensor-Model SL6030 is a replacement for the same unit that accompanied the flood light package bought previously. The flood lights themselves have receivers built into them that are programmed to respond to the sensor.
Also, at my house the sensor is out side in the weather all the time and failed after a couple years of service, which was no surprise. With the hope I can get a few more years out of this replacement I took an empty clear plastic container, about the size of a 3 pound coffee can, cut it in half from top to bottom, and mounted it as an awning over the sensor. It should keep the rain and snow off which in turn should prolong the life of the sensor indefinitely and is practically unnoticeable.
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
19342
Read all my Q&A
December 18, 2012
Answer: 
this unit works with a switch that communicates with the sensor
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Coatesville, PA 19320, USA
Read all my Q&A
September 21, 2012
Answer: 
Not that I know of.
They sell a receiver (Model SL-6012-RX) which plugs into a receptacle. A lamp can then be plugged into the receiver.
For my outdoor lights, The receiver is a wall switch Model 6017 -RX. The Motion Sensor and Wall switch can be bougt as a set ( Model # SL-6051.)
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2

Asked by
Read all my Q&A
May 22, 2012
Answer: 
This is a replacement sensor for an existing Heath-Zenith security light. There are no additional parts needed. It snaps in to the same socket as the old sensor came out of. This sensor does not work with lights that are not Heath-Zenith security lights.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
This question is from 180 Degree Wireless Motion Sensor
 
2 answers

after detection how long before it resets itself to detect again ?

This question is from 180 Degree Wireless Motion Sensor
Asked by
st.mtn.
Read all my Q&A
December 29, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Clinton IL
Read all my Q&A
Home Improvement Profile: DIYer
July 15, 2014
Answer: 
I'm not exactly sure but mine seems to reset within 1 minute after my light goes off Stays on while movement is detected.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Heathco
Read all my Q&A
January 20, 2014
Answer: 
The sensor will continue to stay in "detection present mode" until the object of detection leaves the detection area of the sensor. Once no detection is present then the sensor begins an internal countdown that is either the one minute or five minute selection the user has preset on the sensor. If no detection is sensed by the time of the this 1 or 5 minute period expiring the sensor then resets itself Read More
The sensor will continue to stay in "detection present mode" until the object of detection leaves the detection area of the sensor. Once no detection is present then the sensor begins an internal countdown that is either the one minute or five minute selection the user has preset on the sensor. If no detection is sensed by the time of the this 1 or 5 minute period expiring the sensor then resets itself into detection mode. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:12:06.733-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100654963, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • QUESTIONS, PRODUCT

Customer Reviews

180 Degree Wireless Motion Sensor is rated 3.8 out of 5 by 19.
Rated 3 out of 5 by from Simple solution to difficult problem This is a replacement for the sensor that deteriorated in the intense sunlight in the front of the house. This is a great solution to keep from having to rewire that light fixture which would have been expensive. The original set up of the full unit which included the wall switch was a bit complex initally, but once set up, has worked very well for over five years. The plastic lens cover is not that durable as eventually it drys out and becomes brittle so you have to be careful not to handle it when changing batteries. I don't know of a good alternative to this unit.
Date published: 2012-03-06
Rated 5 out of 5 by from Great product,Fast delivery I bought 2 motion activated flood light seven years ago. The brand was Remote Home.These sensors work with my lights. I really like these sensors because you can place them in various locations around the yard and trigger the lights. It's better if you locate these out of the weather the best you can. I have mine below the overhang on my garage where the rain doesn't soak them. The 2 AA battery's last about 6 months. I have noticed that when the temperature gets down to zero they may activate for no reason. It takes a little time to get the range and angle that works best but once you have them adjusted they work great. I had one in the tree pointing toward the yard but the rain got it too wet and had to replace it. They are water resistant not water proof. You also need to keep in mind that swaying branches or things that move when the wind blows may activate your lights so position them accordingly.
Date published: 2014-07-15
Rated 3 out of 5 by from It worked well for at least 5 years... My Heath Zenith wireless motion sensor began acting up this fall. I put in new batteries and thought all was well, but then realized that the light was NOT coming on at night when guests left after dinner. Put the unit in test mode and it worked fine, going on and off, to show that the motion sensor was indeed working. But it still wouldn't come on when we wanted it most--in the dark. The day/night setting (switch behind the batteries) would make the unit function both day and night, but I just didn't want the darn thing to come on during the day, so I just took the unit apart and cleaned the circuit board and used WD40 on the two switches, hoping that maybe some clean-up of their contacts would restore the night only setting. Not sure of the result yet, but will know tonight and will purchase a new unit if I've failed to restore proper function.
Date published: 2013-12-15
Rated 5 out of 5 by from Great Replacement I got the sensor and receiver a few years ago. I had recent trouble, but the receiver is still working fine. The sensor stopped working in the "night-only" mode. This new sensor works fine. The other good thing I learned is that I can use two sensors for the same receiver. I have one by my gate and one by my back door, so the light comes on whenever I enter the yard.
Date published: 2011-08-06
Rated 5 out of 5 by from Quick and easy! I was worried I would be replacing the entire lighting unit and was not sure this was going to work. Thankfully the instructions were easy to follow, I actually read them before I started the project, and it worked the first time I turned it on. thank you
Date published: 2013-11-12
Rated 5 out of 5 by from Replacement Motion Sensor Bought this to replace the original motion sensor that had been damaged by weather. It works great, just like the original.
Date published: 2013-07-09
Rated 5 out of 5 by from The product is excellent This sensor works just as advertised. Good sensitivity and range of motion. You can use two at different locations off the same switch for added coverage. Highly recommended!
Date published: 2012-12-18
Rated 5 out of 5 by from Good, basic, Home Security System. Good, basic, Home Security System. Lights up house if anyone approaches. Also provides light for you as you return home.
Date published: 2012-09-21
  • y_2017, m_1, d_20, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_, sid_100654963, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT