0016963917156

Heath Zenith

Model # DW-715-1

Internet # 202209289

Store SKU # 737874

Wired Lighted Push Button - White Finish

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # DW-715-1

Internet # 202209289

Store SKU # 737874

To aid your visitors in the dark, install the Heath Zenith Wired Lighted Push Button. It features a lighted, white bar button in a white housing. This push button surface-mounts with ease.

  • Works with Heath Zenith Low-Voltage chime systems
  • Hardwire to your home's electrical system
  • Lighted, white bar button
  • Body finished in white
  • Surface-mounted installation requires no additional holes be drilled

SPECIFICATIONS

Dimensions
Product Depth (in.) 
0.7 
Product Height (in.) 
2.9 
Product Width (in.) 
0.8 
Details
Batteries Included 
No 
Bell Button Type 
Wired 
Color Family 
White 
Color/Finish 
White 
Door Bell Or Intercom Type 
Door Bells 
Electrical Product Type 
Bell Button 
Mounting Style 
Surface 
Returnable 
90-Day 
Warranty / Certifications
Manufacturer Warranty 
1 Year 

MORE PRODUCTS WITH THESE FEATURES

Brand: Heath Zenith
Review Rating: 4 & Up
Bell Button Type: Wired
Color Family: White
Search
2 Questions9 Answers

Customer Questions & Answers

Wired Lighted Push Button - White Finish
Wired Lighted Push Button - White Finish

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
6 answers

Is it easy to install?

This question is from Wired Lighted Push Button - White Finish
Asked by
Corpus Christi,TX
Read all my Q&A
April 12, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
North Jersey
Read all my Q&A
June 2, 2015
Answer: 
Yes it is easy to install. connect your 2 wires and use the 2 screws that come with it to secure it, It is flush mount.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Eagan, MN
Read all my Q&A
April 8, 2015
Answer: 
Yes - two wires - Positive and Negative --- two screws into your home.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Lawrenceville, GA
Read all my Q&A
October 29, 2014
Answer: 
Very easy! My husband took less than 10 minutes.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Snellville, Georgia
Read all my Q&A
August 12, 2014
Answer: 
Yes. All you need is a standard size Phillips' head screwdriver and a pair of small electrical wiring pliers or a small to medium sized needle nosed pliers set will also work well.
Simply unscrew the old bell housing and pull it away gently from the doorjamb. You need to reverse the housing so as to work behind it. Use the needle nosed pliers or wiring pliers to unhook the contact leads at the top and Read More
Yes. All you need is a standard size Phillips' head screwdriver and a pair of small electrical wiring pliers or a small to medium sized needle nosed pliers set will also work well.
Simply unscrew the old bell housing and pull it away gently from the doorjamb. You need to reverse the housing so as to work behind it. Use the needle nosed pliers or wiring pliers to unhook the contact leads at the top and bottom of the bell housing.
Now take the replacement housing and re hook those same leads the same way. (note) some leads may be attached with a small screw that must be slightly raised to un hook the leads. Next re tighten the contact screws once the leads are hooked at the top and bottom.
The bell housing will light up once the leads are attached. Then you can test it by simply pressing the button. If the leads are properly hooked, the bell should ring. If it does not, un hook the leads and re attach them to the contacts for a better fit.
Finally, line up the new housing with the existing holes in the door jamb and re tighten. Do the bottom first to make sure it is lined up, then secure the top. Do not twist tight until you have checked to make sure the housing is lined up straight and is secure in the wood. Then twist until tight.
At night the bell housing gives off a pretty warm "glow" and blinks off then on again as the door bell chimes. Nice touch and elegant look!
That's all there is to it...easy-peaty! Enjoy!!!!!! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Heathco
Read all my Q&A
April 15, 2014
Answer: 
Yes it is easy to install. See the basic instructions below:
1 - Remove your current wired push button.
2 - Unscrew the 2 low voltage wires from the screw terminals on the back of the push button.
3 - Attach the low voltage wires to the screw terminals of the new wired push button.
4 - Attach the push button to your wall surface.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Heathco
Read all my Q&A
April 15, 2014
Answer: 
Yes, it is easy. You need to remove your current wired push button first. Then release the 2 low voltage wires from the screw terminals on the back of the current wired push button. Attach the low voltage wires to the screw terminals of the new push button. Finally, attach the new push button to the wall surface. You're ready to go!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

is this a diode doorbell? ( for chimes)

This question is from Wired Lighted Push Button - White Finish
Asked by
tucdave
tucson, az
July 1, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Harrisburg, PA, USA
Read all my Q&A
December 31, 2013
Answer: 
No, just a basic doorbell (2-chime).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Mechanicsville, VA, USA
Read all my Q&A
April 2, 2013
Answer: 
I have a chime doorbell and it worked fine after installation of this doorbell button.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
July 2, 2012
Answer: 
This model does not have a diode installed. You need a diode for the push button if you have a doorbell with an electronic chime base (has a speaker). If you currently have a wired electronic base currently, then your current push button likely has a diode that you can remove and use. If you are installing a new Heath/Zenith wired electronic base, then a diode will come with the doorbell itself. You can Read More
This model does not have a diode installed. You need a diode for the push button if you have a doorbell with an electronic chime base (has a speaker). If you currently have a wired electronic base currently, then your current push button likely has a diode that you can remove and use. If you are installing a new Heath/Zenith wired electronic base, then a diode will come with the doorbell itself. You can also contact Heath/Zenith technical service at 1-800-858-8501 on how to get an extra diode. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-05-27 T15:42:57.359-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202209289, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 4.3 out of 5 by 46 reviewers.
Rated 5.0 out of 5.0 by Works well as expected A little more expensive than I'd thought, but it works well in replacing my existing broken one that lasted 15+ years. Hopefully this one will last just as long. February 9, 2016
Rated 2.0 out of 5.0 by cheap quality product The slots in the mounting screws are very shallow. I could not keep a straight-bladed screwdriver in the slot. I had to use a hack saw to cut the groove deeper so that I could get the screws in. I really would pay a little more if the store would carry a better quality line of products. November 8, 2015
Rated 4.0 out of 5.0 by Simple Door bell This doorbell is simple and does the job. It replaced a cracked door bell that looked similar. My husband had no issues with the install. October 20, 2015
Rated 4.0 out of 5.0 by Simple improvement Easy to install even for an old lady like me. A small price for a nice touch to the front entry. September 22, 2015
Rated 5.0 out of 5.0 by Easy to Install The door bell switch was easy to install. Button light is bright and easy to see. Works well September 1, 2015
Rated 4.0 out of 5.0 by great price This works great for a replacement for our broken push button. I have yet to install it so I'm not sure how easy it will be but it seems pretty easy. Cant beat the price! July 14, 2015
Rated 2.0 out of 5.0 by Fine button until the light burns out This lighted doorbell button is made in China. It is easy to install, and the light is bright. The bright light should have tipped me off -- in one of the two I bought, the bulb burned out after four months. The bulb is not replaceable, so after it goes, you have a non-lighted button. How stupid is this design! Doorbell transformers have been 24 volts for decades. A good design would have used a bulb rated for a higher voltage, even if that makes slightly less light. If you're an electronics wiz like me, it's easy to remove the bulb and install a white LED in this button. I did this with both buttons, and now I never need to worry about a bulb again. Technical summary: Bright white LED, 1N4001 diode, 1.8K 1/4-watt resistor, all connected in series between the two button terminals on the circuit board. LED current is about 6.5 milliamps. Unsolder the bulb, clean the holes, and solder one lead of the diode and resistor in each hole. Mount all components on the back side (away from the button) of the circuit board. I drilled a #11 hold through the center of the circuit board, and poked the LED through it, securing with two drops of super glue. Connect the remaining lead on the diode and resistor to the LED. June 20, 2015
Rated 5.0 out of 5.0 by Simple and it works It's a doorbell push button that lights up, It works you push it the door bell sounds. The price is a little high for a small piece of plastic with a contact. June 2, 2015
  • 2016-05-28 T18:00:40.966-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_46, tr_46
  • loc_en_US, sid_202209289, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • REVIEWS, PRODUCT