0016963616608
Discontinued

Heath Zenith

Model DL-7366-02

Internet #100627072

Wireless Plug-In Door Chime Kit

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

The SL-6166 wireless door chime features an 8-note Westminster melody or a 2-note melody for the front entrance with adjustable volume control to suit varying sound needs. The wireless door chime kit includes a plug-in receiver and a battery operated push button (push button battery included) with up to 100 ft transmission range between the chime receiver and push button.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions10 Answers

Customer Questions & Answers

Wireless Plug-In Door Chime Kit
Wireless Plug-In Door Chime Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Wireless Plug-In Door Chime Kit
 
3 answers

I'm told there is a "remote" door bell that plugs into any wall outlet and receives the ringing of the front door bellI. Is that true.

This question is from Wireless Plug-In Door Chime Kit
Asked by
Jim
Danville, CA.
August 17, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Alexandria, VA
Read all my Q&A
February 15, 2015
Answer: 
Yes, there is a remote doorbell - you can but this unit with one or two or zero buttons. Be sure to buy a unit that comes with at least one button as these don't have the necessary "jumpers" to change the frequency to marry up button with doorbell.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Woodbridge, VA, USA
Read all my Q&A
December 1, 2012
Answer: 
That is true. This is what this unit does. I have the door bell outside next to the front door and the chime unit is inside, about 12 feet away.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
August 20, 2012
Answer: 
That is right. This model is one of them. Other plug in doorbells are the DL-6167 which come with 2 wireless push buttons. All Heath/Zenith wireless doorbells and push buttons are compatible, so you could purchase a different push button as well if you like.
If you have a traditional wired doorbell in your home, and would like to continue using that, you could purchase the DL-6157 doorbell extender. You Read More
That is right. This model is one of them. Other plug in doorbells are the DL-6167 which come with 2 wireless push buttons. All Heath/Zenith wireless doorbells and push buttons are compatible, so you could purchase a different push button as well if you like.
If you have a traditional wired doorbell in your home, and would like to continue using that, you could purchase the DL-6157 doorbell extender. You place the rectangular transmitter device on top of, or next to your current doorbell, and when the doorbell rings, it will send a signal to the included plug in unit that you can put somewhere else in your house. This is perfect for a situation where you can't hear your doorbell in a certain portion of the house like an upstairs room or a basement. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Wireless Plug-In Door Chime Kit
 
2 answers

Can I use a second chime with it?

This question is from Wireless Plug-In Door Chime Kit
Asked by
Indialantic, FL
Read all my Q&A
January 29, 2014
I want to have the chime ring inside my home and in my outdoor living area. Is it possible to use one button and 2 chime devices?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Alexandria, VA
Read all my Q&A
February 15, 2015
Answer: 
I don't think so. We were unable to pair it with another doorbell button as there are no jumpers in the unit, so I don't think you will be able to pair it with anything else.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Heathco
Read all my Q&A
January 30, 2014
Answer: 
Yes, you can add additional Heath Zenith brand wireless door chimes and use with the same wireless push button. All Heath Zenith wireless door chimes and push buttons are compatible.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Wireless Plug-In Door Chime Kit
 
2 answers

how do i change the song OR CHIME?

This question is from Wireless Plug-In Door Chime Kit
Asked by
WINDY
deerfield beach FL 33442
November 11, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Woodbridge, VA, USA
Read all my Q&A
December 1, 2012
Answer: 
To change the chime, you will need both the Door Bell unit and the Chime unit. Remove the Door Bell unit so you can access the inside for the back. Unplug the Chime unit and turn it over. At the bottom of the back of the Chime unit, there is a small flip door that is secured by one screw. Remove that screw and flip open the door.
The sound the door bell makes depends on having a jumper (that little Read More
To change the chime, you will need both the Door Bell unit and the Chime unit. Remove the Door Bell unit so you can access the inside for the back. Unplug the Chime unit and turn it over. At the bottom of the back of the Chime unit, there is a small flip door that is secured by one screw. Remove that screw and flip open the door.
The sound the door bell makes depends on having a jumper (that little black cap that fits over the prongs) on location 8 (the location furthest to the right).
To hear a single Ding, place a jumper on location 8 in the Door Bell unit. Do not place a jumper on location 8 in the Chime unit.
To hear Ding-Dong, do NOT place a jumper on location 8 in the Door Bell unit and the Chime unit. That is, both location 8s will NOT have jumper.
To hear the eight note "Westminster" tune, place a jumper on location 8 in the Chime unit, with no jumper on location 8 in the Door Bell unit.
Do not remove jumpers from locations 1 through 7, which are used to have the Door Bell unit "talk" to the Chime unit.
Hope that helps Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
November 12, 2012
Answer: 
Regarding your question on Heath Zenith Wireless Plug-In Door Chime Kit
Model # SL-6166-C, you can adjust the tune selection easily on your chime. Please consult the complete owners manual at the link below for more details: (see Tune setting)
http://www.heath-zenith.com//data/manuals/200197-02A.pdf
Thanks for your question!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Wireless Plug-In Door Chime Kit
 
1 answer

Is it weather proof [the outside buzzer] and can you screw it into the side entrance wall.

This question is from Wireless Plug-In Door Chime Kit
Asked by
franklin sq ny
Read all my Q&A
September 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Heathco
Read all my Q&A
September 11, 2014
Answer: 
The wireless push button that goes outside is weather resistant and is made to be placed outside. It can be mounted by double-sided tape or screws (all included with the kit).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-29 T14:45:01.968-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100627072, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 170ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.5 out of 5 by 10 reviewers.
Rated 4.0 out of 5.0 by RTFM - Design Has Been Changed/Improved I might be wrong, but it seems to me that SL-6166-C has been changed in-store to SL-7366 (not online yet) but images, descriptions and price match up. The technology has changed thusly: Tone selection - Old: Jumper, New: Dip Switches Push button pairing - Old: Jumpers, New: Within 20 seconds of plugging in chime, press and hold push button until chime sounds - this can be done to pair a number of pushbuttons. There is a procedure to erase all pairing. Battery - Old: 12v 23A, New: CR2032 button battery (CR2025 also fits and works) I've compared both in real world and the new model's range and sound quality/volume are superior. Also pairing is simpler because there is no need to touch jumpers nor dip switches which require removing screw from chime and using needle-nose pliers or tweezers, and opening up push button - dip switches are only for tone selection, not for pairing. Also, instructions are clear and simple, but you have read them ;-) There's a review by MilitarySpouse fromAlexandria, VA which incorrectly says there is no way to pair additional buttons. My guess is that either they did not read the manual, or referred to instructions for an older/different model. April 24, 2015
Rated 2.0 out of 5.0 by Great sound but will not adapt to other wireless doorbells as advertised The sound of the Westminster chime is terrific but the unit does not function as advertised. We wanted to pair up a different doorbell button onto this unit and the packaging advertises it can be expanded to more buttons. BUT, there are no jumpers inside the main unit so that the frequency can be changed or matched to another button. So crazy! We took it back and got a different unit, the stand alone doorbell to be paired with a wireless button to be purchased separately. Again, no jumpers so there is no way at all to pair this with any button! Back to store we must go again. Guess the only way to make this work is to buy a unit that comes with one or two buttons and forget about pairing anything else with it, unless you can find an older version that is still made with the jumpers. Good luck. February 15, 2015
Rated 2.0 out of 5.0 by Limited range Looks OK, installs easy, affordable. Unless you plan on installing receiver within 12 feet of your door, shop around. I finally extended the range to about 20 feet by opening the receiver and extending antenna wire outside the enclosure. I had some success without this modification but it wasn't reliable, maybe 25% of the time it worked at the 20 foot location October 22, 2014
Rated 5.0 out of 5.0 by Hey, it WORKS! Bought a doorbell extension. Didn't work. Sent it back and bought this one. It replaces (or augments-depending on the person ringing) the original and can be plugged in wherever you want it to ring. The only problem now is getting people to push this button, instead of the one on the wall (which has tape over it with an arrow pointing to the new button). Sigh. Still. May 6, 2014
Rated 4.0 out of 5.0 by Works Fine Door bell is about 12 feet from the chime unit. Button needs to be pressed firmly to activate, but it works. Was getting some "false" rings, so just revised the ring codes. Not difficult, but the pieces that need to be moved are small; suggest needle nose pliers to help. Chime unit is located in a central entryway and is loud enough to be heard in upstairs and downstairs. So, other than a few false rings (which hopefully the changing of the code will fix), we are very happy with the unit. December 1, 2012
Rated 5.0 out of 5.0 by THIS IS A GREAT PRODUCT, LOVE IT NOTHING TO THIS INSERT BATTERY PLUG IT IN MOUNT THE DOORBELL AND AWAY YOU GO August 19, 2014
Rated 4.0 out of 5.0 by This product serves its purpose The product is good but the volume is loud. There is an adjuster but even the lowest volume is still too loud. The only improvement I would have is to have the manufacturer adjust this. Otherwise, the product is good and it serves its purpose. Thanks April 1, 2014
Rated 4.0 out of 5.0 by performs as stated ordering was easy, shipping was quick. Product works as expected. August 21, 2013
  • 2016-08-29 T15:28:24.202-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_10, tr_10
  • loc_en_US, sid_100627072, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 113ms
  • REVIEWS, PRODUCT