Rated 4.0 out of 5 by 43
Rated 5.0 out of 5.0 by kenster simple to install works great without needing to run wires
this works great in areas that you do not want to run wires.
August 27, 2013
Rated 2.0 out of 5.0 by Wiggle Wireless Switch not that great
This Switch can not be installed in a normal wall box. It is a complete package and must remain in the surface mount box that it comes in as that is where the battery box is. It can not be modified to fit in a normal switch box. The switch does not work like a normal switch because if you don't push it all the way down off may be up and on down and it will switch between up for on and up for off.
It has a reasonable range and works most of the time but there is a delay. If you really need this thing to work every time without fail then don't buy it. If you need it as a novelty then it will work.
Would be good for turning on and off a Christmas tree.
February 25, 2015
Rated 2.0 out of 5.0 by Bobby mystery switch
The switch worked well and was easy to setup. The wall toggle looked good and mounted easily.
I was delighted with it . I used it in my garage to control a ceiling light plugged into the outlet by the door
opener . However it has, after a month or two been turning itself on during the night will we sleep.
It has happened repeatedly and the position of the toggle is always as I had left it . I will contact the
mfger to see if there is a solution.
March 14, 2015
Rated 5.0 out of 5.0 by Eddie Very nice. Works as it should through the floor into my basement.
I have this mounted on a wall next to my entry door and it controls a unit in my basement. Works well but there is one thing that should be noted. There is no "On" or "Off" label on the switch and I mounted it so that it turned the circuit on when the switch was up. After a week or so the up position is now "Off" so it is a bit difficult to know if the system is on or off without looking.
July 29, 2014
Rated 5.0 out of 5.0 by bdirnbac Easy way to install a (light) switch
The product works as described. You supply the 9 volt battery and place the switch/transmitter on the wall with 2 screws (they include anchors which you probably don't need). A faceplate neatly conceals the innards.
The receiver is plugged into the outlet and the lamp goes into this (they say 100 ft range - mine was 5 feet). The transmitter sends out a radio signal and turns the light on and off.
One problem could occur if you buy several units from mail order, and they're all frequency (let's say) E, then a switch in one room might control lights in another room. (I bought one unit.) [An "E" switch controls only an "E" receiver and the package lists the frequency.] You might actually want one switch to control several lights, so you would need all the units to be the same frequency. Otherwise, this could be a nightmare where all sorts of lights go on and off without you intending this because a switch in one room controls all the lights in other rooms.
So if you need several switches, buy them from a physical store so you can determine the frequency of each.
October 23, 2011
Rated 5.0 out of 5.0 by Tucson Super Solution!
This was for our Grandson. His room had no overhead light. He is thrilled to flip the switch and have his floor lamp come on!
January 20, 2015
Rated 5.0 out of 5.0 by CJ14275 Exactly what we were looking for
After rearranging bedroom furniture we were looking for a way to have lamps turn on with a wall switch by the door. Certainly didn't want wires running along the base boards. This wireless switch outlet was easy to install and worked like a charm. Took a little time to get the right touch for the light to go on - you just barely touch it as opposed to flipping it like an ordinary switch. Excellent results.
April 29, 2014
Rated 5.0 out of 5.0 by lorit IWorks Great!
I love this... It works great, I love being able to turn on lights when I walk into a room... It's also great in that you don't have to attach it to the wall..... I can carry to the bed, read and turn off the lights without getting out of bed.
November 8, 2011