0081725208919

Henry

Model HE208R004

Internet #100038227

Store SKU #397045

10.3 oz. Rubber Wet Patch Roof Cement

$4.75 /each
  • Stops Roof Leaks instantly, even under water!
  • Use on chimneys, skylights, shingles, vents, and more
  • Meets ASTM D-3409- 100% wet surface adhesion

Frequently Bought Together

Product Overview

Henry 208R Rubberized Wet Patch is the premium SBS modified bitumen compound for sealing roof leaks on wet surfaces. It patches holes and cracks even in a driving rain or under water and are so versatile it may be used whether the weather is wet or dry, hot or cold. It is especially easy to spread in cold temperatures.

California residents: see   Proposition 65 information

  • Sticks to both wet and dry surfaces, even in freezing temperatures
  • Repairs leaks under puddle water
  • SBS rubber modified formula provides flexibility and a long service life
  • Repairs shingles, roll roofing, valleys, splits, cracks, raised edges and more
  • Seals chimneys, skylights, turbines, roof vents, gutters, air conditioning units and more
  • Pair with yellow Henry 183 repair fabric for professional results
  • Apply with a roofing trowel, putty knife or caulk gun
  • 11 oz. covers approximately 17 lin. ft.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

13 Questions22 Answers

Customer Questions & Answers

10.3 oz. Rubber Wet Patch Roof Cement
10.3 oz. Rubber Wet Patch Roof Cement

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 10.3 oz. Rubber Wet Patch Roof Cement
 
3 answers

does it work on galvanized metal

This question is from 10.3 oz. Rubber Wet Patch Roof Cement
Asked by
Read all my Q&A
June 5, 2016
I have holes to patch on my pond riser
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Alabama
Read all my Q&A
Home Improvement Profile: Professional
June 7, 2016
Answer: 
Yep. Take a wire brush and clean off any dirt or debri, then apply. It will cure into rubbery and flexible after a day or so. If you have a larger hole, cut a piece of window screen (Fiberglass works well) a little bigger than the hole, apply a layer of the cement, push the screen down into it, then apply more cement on top to form a strong patch. This has worked on a baseball sized hole, but I certainly Read More
Yep. Take a wire brush and clean off any dirt or debri, then apply. It will cure into rubbery and flexible after a day or so. If you have a larger hole, cut a piece of window screen (Fiberglass works well) a little bigger than the hole, apply a layer of the cement, push the screen down into it, then apply more cement on top to form a strong patch. This has worked on a baseball sized hole, but I certainly don't recommend that, it was an emergency at the time. (Branch fell and jabbed through roof. ) Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 7, 2016
Answer: 
Joe-The best product for metal would be our 209 Extreme Lifetime Warranty Wet Patch Roof Repair. Thank you for putting your trust in the Henry Company and The Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 6, 2016
Answer: 
You can use this product on metal.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 10.3 oz. Rubber Wet Patch Roof Cement
 
3 answers

How do you open the tube

This question is from 10.3 oz. Rubber Wet Patch Roof Cement
Asked by
Read all my Q&A
November 21, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Alabama
Read all my Q&A
June 7, 2016
Answer: 
Cut the spout to the desired bead size, then push a piece of wire or a nail down into the tube tobreak the foil. Install tube in caulk gun, and go.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Conklin , New York 13748
Read all my Q&A
December 8, 2015
Answer: 
Razor blade knife
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

November 30, 2015
Answer: 
You have to cut tip and then puncture seal inside tip.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 10.3 oz. Rubber Wet Patch Roof Cement
 
3 answers

How long does it take to cure?

This question is from 10.3 oz. Rubber Wet Patch Roof Cement
Asked by
Read all my Q&A
August 23, 2015
I put it on while it was slightly wet around 5 hours ago. I just went on the roof again and the material is still tacky.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

February 4, 2016
Answer: 
Typically, it takes 30 days to cure. It will always remain soft/rubbery. It's formulated that way to expand and contract with your roof.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Houston, TX
Read all my Q&A
Home Improvement Profile: Professional
November 6, 2015
Answer: 
I used this on my roof. It was hard as a rock 2 days later when I checked. It had also developed many cracks even though the orinal cracks I was using this to seal were far smaller than the 1/4" the tube says it will seal.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
San Diego, California
Read all my Q&A
August 30, 2015
Answer: 
This is more like tar than something such as caulk. It will stay tacky for quite a while. It doesn't really get hard like caulk or silicone sealant. I haven't had any leaks from it however. We had a good downpour about a month ago, and no leaks! I used it when I installed a turbine on the roof.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
This question is from 10.3 oz. Rubber Wet Patch Roof Cement
 
2 answers

is this a self leveling product?

This question is from 10.3 oz. Rubber Wet Patch Roof Cement
Asked by
Read all my Q&A
August 4, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 6, 2016
Answer: 
Chief-No, we would not consider this to be self-leveling. It is a thick, trowel grade product. Thank you for putting your trust in the Henry Company and The Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 5, 2016
Answer: 
No, this product requires the use of a trowel or putty knife.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:03:46.171-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100038227, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.5 out of 5 by 57 reviewers.
Rated 5.0 out of 5.0 by Works great Great product. A lot less mess and money than buying a whole bucket of roofing tar August 30, 2016
Rated 5.0 out of 5.0 by Good Product It is working well. Roof was wet, but product stich togeter. August 23, 2016
Rated 4.0 out of 5.0 by Good material The manufacturer should include a plastic pouch with a little sand at the bottom of the bottle to spray over the applied area. This could definitely be cheaper. July 27, 2016
Rated 5.0 out of 5.0 by Good stuff It is works 100% Home Depot always have good quality material. June 29, 2016
Rated 1.0 out of 5.0 by roofing There defective Having to return them they don't fit in the calking gun there defective June 24, 2016
Rated 4.0 out of 5.0 by .Henry wet patch Rubberized Roof Leak Repair I have used the product for years it allways works and it last. June 28, 2016
Rated 5.0 out of 5.0 by Nasty, goopy... Perfect. This stuff does what it says. Even when we got a pretty rough storm, I was able to apply it to a leak in the roof of my shop. It's nasty, and goopy as can be, but it holds strong and dries flexible. I usually put a bit of fiberglass window screen into the primary layer and smooth more on top for larger holes, works really well too. June 7, 2016
Rated 5.0 out of 5.0 by It works Applied to seal the caulk crack on the joint between copper bay window roof and brick wall. It seals well and easy to apply. June 7, 2016
  • 2016-09-08 T14:12:44.801-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_57, tr_57
  • loc_en_US, sid_100038227, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • REVIEWS, PRODUCT