Model # 158022

Internet #203461208

Store SKU #683346

Hercules 1 oz. Megaloc Thread Sealant Tube


1 oz. Megaloc Thread Sealant Tube

$2.60 /each

Frequently Bought Together

Product Overview

Multi-purpose thread sealant made with DuPontTM KEVLAR for use on metals including steel, stainless steel, brass, copper, aluminum, and on plastics including PVC, CPVC and ABS. Leak-free joints can be tested and put into service at once. MEGALOC wipes clean from hands and tools with a dry rag, is odor-free, grit-free, and will not separate or settle.

  • Odorless formula is non-separating, non-flammable and non-hazardous
  • Seals plastic and metal pipes and fittings
  • Performs over a range from -50°F to 400°F
  • Safe for drinking water lines
  • In-lid applicator
  • Sets soft with no cure time required
  • Wipes clean from hands and tools and washes out of clothes
  • Resists hardening and cracks
  • Hydraulic resistant to 12,000 psi
  • Withstands gas pressure to 2,600 psi

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

Rated 3.3 out of 5 by 4 reviewers.
Rated 5.0 out of 5.0 by sealed air hose connections with ease I used this to connect new fittings to my air compressor, air hose reel, multiple air tools and a separate standalone air hose. I did notice, as did another reviewer, a clear fluid had separated from the main paste in the tube so I capped it, and massaged the tube up and down to get it mixed well. I doubt that really made any difference though and think it would have worked fine if I just drained the fluid first. Then I squeezed the paste out onto the male ends of each fitting like toothpaste. No trouble getting it to stick to the threads, maybe because I put on a little more than probably necessary. Tightened up each connection real good, wiped off the excess, and no leaks so far. Tested my system overnite - left everything pressurized at 100psi from 10pm until 8am the following morning and no noticeable pressure loss on my gauges. May 20, 2016
Rated 2.0 out of 5.0 by Will not buy again. This joint sealant is difficult to work with... An amber liquid separated from the fibrous component and the blue paste, and it does not adhere well to the threads. I used it on a variety of threaded joints for water and compressed air... all plastic, plastic into metal and all metal, and several of the joints required dis-assembly and reapplication of Megaloc to get it to seal, or the addition of some PTFE tape. Since it did not adhere well to the threads and was not homogeneous, the fibers pushed the paste out of the threads and not much sealant was left to make the seal. Best results were obtained when Megaloc was worked into the clean male threads and then covered with a couple wraps of PTFE tape to hold it in place when tightening the joint. That is the most reliable method for sealing metal threads no matter what kind of pipe dope is used. Bottom line, I don't recommend the Megaloc because there are better products on the market. It wipes off cleanly with a dry cloth as stated on the package, but that is not really a good characteristic for a thread sealant. January 29, 2016
Rated 1.0 out of 5.0 by Don't walk, RUN AWAY!!! Used this stuff on PVC threaded connections for pool and it leaked like a sieve!!! May 13, 2015
Rated 5.0 out of 5.0 by Works like a charm I used the product on a PVC drain connection which otherwise was leaky. It worked perfectly, highly recommended. January 14, 2014
  • 2016-10-21 T21:27:38.529-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_203461208, prod, sort_default
1-4 of 4
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 129ms