Model # KCP-65-H

Internet #203985892

Hitachi 2-Piece 2.5 in. x 15-Gauge Angled Finish Nailer and 6 gal. Oil-Free Pancake Compressor
0064747111153

Discontinued Hitachi

2-Piece 2.5 in. x 15-Gauge Angled Finish Nailer and 6 gal. Oil-Free Pancake Compressor

Frequently Bought Together

Product Overview

The Hitachi 2-piece pneumatic nailer kit comes with the NT65MA4 and EC510. The NT65MA4 15-gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The EC510 6 gal. Pancake compressor is ideal for finish work and trim. The oil-free pump is capable of producing 2 CFM at 90 psi and 145 psi of max working pressure.

  • NT65MA4: integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
  • NT65MA4: tool-less, easy to clear nose for quick nail extraction should a nail jam during use
  • NT65MA4: selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch; no tools or parts required
  • EC510: 6 gal. pancake style tank with rubber feet and easy turn drain valve
  • EC510: oil-free pump for long life with no maintenance
  • EC510: two universal quick couplers for fast tool changes

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 176ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

2-Piece 2.5 in. x 15-Gauge Angled Finish Nailer and 6 gal. Oil-Free Pancake Compressor is rated 4.5 out of 5 by 131.
Rated 5 out of 5 by from So far working great and the cost was good also. Bought it in a pinch to replace my dewalt when the trigger seals went out in the middle of a remodel. Ive only used it for the one small job so far but it seems to work great. Hope it holds up as wel as my dewalt and I the price of the nails also. I can't beleive that its already been discontinued though, thats my luck Ive only had mine for abought four weeks. Hope parts will be available and easier to get than my dewalt.
Date published: 2017-05-15
Rated 5 out of 5 by from So far,great Used for the first time today.Worked very well,drove 1 1/4 " nails below the surface. I did have a couple of instances where the nailer would not fire---After rechecking the manual, i believe it was because i had the pressure set too low(below 60 lbs in both cases.) Like i said earlier, this was the first time I used it and am still learning the features--looks like its going to work just fine!
Date published: 2016-12-28
Rated 2 out of 5 by from Constant jams My Finishing nailer is only two years old with about 2 - 3 hours use. Followed directions meticulously. Nail jams are constant to the point I have stopped using it. Replacement part of Driver Blade costs 1/2 of purchase price. Not recommended even though I decided on this model due to great reviews.
Date published: 2017-04-05
Rated 5 out of 5 by from Flawless Sparked at first but settled in and worked perfectly. I am midway on two thousand feet of oak hardwood flooring. It replaced my old Senco and is nearly as good, even new Senco is not the old Senco.
Date published: 2016-08-28
Rated 1 out of 5 by from Good concept but disappointing I do finish carpentry professionally and this unit could not keep up with a couple of finish guns. I burnt it up just after the warranty expired. I have read a lot of similar bad reviews. I expected more from Hitachi.
Date published: 2014-01-22
Rated 1 out of 5 by from Do Not Buy I am a commercial/ residential cabinet installer. I did not even take this compressor to work and yet it failed me with a week or so of use. I lost the receipt, and chose to fix it myself. I have had to weld one of the compressing valves shut just to make the piece of junk ....useable? I still peek out at 105 psi and have to shut it of before the motor overheats. I do not write reviews on any products, however, this product was the biggest waste of my money and truly deserved it. Save those receipts kids!
Date published: 2015-07-12
Rated 1 out of 5 by from this product bombed I recieved my little compressor My kids bought for my birthday. It worked fine for a little while but then it started stinking come to find out the motor was burning up ,I do not use this compressor everyday so it should not have burned up, now I use it for my brad nailer around my house and the kids tire now and then. So now what I have to buy a new motor , I guess if I knew ware to pick one up , I would the ec510 was fine for what I do with it, but now its dead.
Date published: 2015-05-04
Rated 1 out of 5 by from Patricks I'm a carpentry contractor. I really liked this little unit. Really! Until one of the carbon brushes cracked/broke. And, what a surprise; the brushes are not for sale anywhere I could find. Now, that is just NOT what I expected. I was told I had to buy the whole pump/motor. Crazy. I have a number of Hitachi power tools and they have served me and my crews well. But this unavailability of a high-wear part is nonsense.
Date published: 2015-01-17
  • y_2017, m_6, d_23, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_131
  • loc_, sid_203985892, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 166ms
  • REVIEWS, PRODUCT