0064747111207
Discontinued

Hitachi

Model KNT65M-50

Internet #203985917

2-Piece 2.5 in. x 16-Gauge Finish Nailer and 18-Gauge x 2 in. Finish Nailer Kit

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

The Hitachi 2-Piece Pneumatic Nailer Kit comes with the NT65M2S and NT50AE2. The Hitachi NT65M2S 16-Gauge finish nailer features a non-slip elastomeric grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT50AE2 2 in. x 18-Gauge finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8 in. in length up to 2 in.

  • NT65M2S: integrated air duster button allows air from the compressor to bypass the nailing function and expel air from a hole in the front of the nailer allowing the user to clear away dust and debris from the work surface
  • NT65M2S: tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use
  • NT65M2S: tool-less depth of drive dial allows the user to easily adjust the drive depth for a professional finish
  • NT50AE2: elastomer grip adds comfort and prevents slippage
  • NT50AE2: visual nail reload indicator, located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided
  • NT50AE2: tool-less, easy to clear nose for quick and simple nail extraction should a nail jam during use
  • NT50AE2: engineered with the safety behind the narrow nose piece and a short center height allows for nail placement in hard to reach areas and corners
  • NT50AE2: depth of drive dial allows the user to easily adjust the drive depth for a professional finish

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

2-Piece 2.5 in. x 16-Gauge Finish Nailer and 18-Gauge x 2 in. Finish Nailer Kit
2-Piece 2.5 in. x 16-Gauge Finish Nailer and 18-Gauge x 2 in. Finish Nailer Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
1 answer

How do i purchase this? Is it still availible ?

This question is from 2-Piece 2.5 in. x 16-Gauge Finish Nailer and 18-Gauge x 2 in. Finish Nailer Kit
Asked by
Read all my Q&A
May 3, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 24, 2016
Answer: 
Thank you for your recent inquiry with The Home Depot, This nailer has been discontinued and is no longer available. . We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-08-29 T14:45:24.032-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203985917, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 230 reviewers.
Rated 5.0 out of 5.0 by Great unit. I finished a 550 square foot room with 3/4 inch tongue groove pine w/ this 18 gauge 2 inch nailer and not one board has come loose. During the project i had to remove a warped board that i had nailed down and had to use a crow bar to remove the board. the nails pulled through the board then i had to remove them individually. i am surprised I could complete the project with such a high gauge nail. great little gun, never jammed over the 6 weeks it took to finish the project. February 25, 2015
Rated 4.0 out of 5.0 by Great Gun I like this gun very much it has a full range of nail capacity. It can shoot 5/8" up to 2" brads. The air button on the back makes it easy to clean off what your working on. Some people have complained about it jamming, but if you load them all the way to the bottom of the nail magazine it doesn't seem to jam. I love this gun and would recommend it to friends and family. Hitachi hit on the head again with this one. March 4, 2015
Rated 1.0 out of 5.0 by Worked fine for about a dozen times then jammed Used this about a dozen times then it started to jam. The mechanism that pushed the brad nails gets stuck so the pressure to feed the brad nails fails so you get a misfire. Not good to get misfires on your trim. Very frustrating. Today the darn spring that pushes the brads broke. Not happy with HItachi. Not impressed. Will have to buy different brand now. March 8, 2015
Rated 4.0 out of 5.0 by Great brad nailer This is a nice brad nailer. Works as it should. Very happy with my purchase! March 24, 2015
Rated 5.0 out of 5.0 by Great air nailer Great for projects small or large. Comes with a case and safety glasses. Very lite weight but does a great job of driving nails up to 2". I love it. February 10, 2015
Rated 5.0 out of 5.0 by just what i needed i needed a good finish nail gun for smaller stock and projects that call for finner brad like when i build a jewelry armoire, this is perfect. It will do larger size but i have another gun(Senco) i use for base boards and moldings and any projesct i need 1 1/2" to 2" nail but many times i needed a good brad nailer and this fits the bill. No complaints, no jams, no problem. January 20, 2015
Rated 4.0 out of 5.0 by Great replacement nail gun Replaced a bostitch that quit working mid project (was practically new). This one was on sale for a great price and shipping was very quick. Will buy more of these nail guns as the rest of my bostitch guns fail. February 25, 2015
Rated 4.0 out of 5.0 by Good nailer Hitachi has always made good nailers and this is one of them. Light,easy to handle and it gets the job done January 20, 2015
  • 2016-08-29 T15:29:03.546-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_230, tr_230
  • loc_en_US, sid_203985917, prod, sort_default
2 3 4 5  ... 9 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT