Free Shipping and BOPIS


Model # N5008AC2

Internet # 202065358

Store SKU # 615774

2 in. x 16-Gauge Medium 7/16 in. Crown Construction Stapler with Safety Glasses and Hex Bar Wrench

This item has been discontinued.
The Home Depot no longer carries this specific product.

Was   $249.00
$219.00 /each

Save $30.00 (12%) through 08/02/2015

Limited Quantities available at discounted price
Promotion Details
Price Valid : 06/17/2015 - 08/02/2015
Limited Quantities available at discounted price


Model # N5008AC2

Internet # 202065358

Store SKU # 615774

This 2 in. x 16-Gauge Medium Crown Construction Stapler features Stainless Steel plating on the magazine for added strength while the top-loading design allows for quick and easy loading for added convenience. The open design lets the user see how many staples are left in the magazine. The cylinder valve firing mechanism is self-cleaning and provides rapid response for efficient driving. The stapler features a lightweight construction for better handling and a rubber grip for greater comfort.

  • Plastic magazine with stainless steel plating for added durability
  • Top-loading magazine for fast and easy loading with an open design to allow users to quickly check staple quantity
  • Quick-clear nose with a tool-less jam release helps reduce down-time
  • Cylinder valve firing mechanism to provide quick response and rapid driving
  • Depth-of-drive adjustment offers countersink or flush-drive options for a variety of materials
  • Lightweight and well-balanced for easy maneuverability and reduced fatigue
  • Fires 7/16 in. 16-Gauge crown staples from 1-2 in. in length
  • May be used for wall sheathing, roof decking, subfloor installation and constructing pallets and crates
  • Rubber grip for added comfort
  • Self-cleaning firing mechanism is highly resistant to grease and grime build-up and provides rapid driving for efficiency
  • Need help? CLICK HERE to view our Nail Gun Buying Guide
  • Home Depot Protection Plan:

    Home Depot Protection Plan

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Air Tool Type 
Air Nailer 
Compressor/Air Tool Features 
No Additional Features 
Energy Type 
No additional components or accessories are included 
Loading type 
Maximum Fastener Size 
2 in 
Minimum Fastener Size 
1 in 
Minimum Recommended Air Delivery SCFM @ 90PSI 
Minimum Recommended Operating Pressure (psi) 
Tools Product Type 
Hand Tool 


Rated 4.1 out of 5 by 14 reviewers.
Rated 5.0 out of 5.0 by Great tool Galvanized stapler is a great timesaver on a farm dealing with chicken wire and fence wire. Speeds up the job tremendously over hammer in staples.. Shoots a very heavy duty galvanized staple from 1 to 2"" long with no problem. April 21, 2015
Rated 2.0 out of 5.0 by GREAT when it works this stapler built pretty solide. I generally like hitachi but was a little disappointed with this. I have to dry fire the thing for a good 30 seconds just to get it to work. after that the thing works great. also when it was cold out, the thing would not work. i had to keep it in the truck with me so it would warm up on the way to work. that or I'd have to take a heat gun to it to warm it up enough so it would start to work. but once the stapler got going it was great. very ergonomic and user friendly just had to get the thing warmed up. August 10, 2012
Rated 5.0 out of 5.0 by Used for professional vinyl siding @ 30-45 degrees in Denver We got this model a week ago and have used it continuously without a single jam. We've only used Hitachi staples so far so that could be part in it. It's accurate, smooth, quiet, and puts the staples right on target at 80 lbs pressure. We have every stapler there is and all of them eventually need service so what's new about that? This Hitachi is really saving us a lot of time and it's so smooth we waste staples just having fun using it. February 18, 2013
Rated 5.0 out of 5.0 by Exactly What I Needed! This stapler worked great and helped my finish my bunk frame quickly. January 10, 2014
Rated 5.0 out of 5.0 by This product is flat out dependable! Three years ago I purchased this same compressor for an alternate easy to load and move around. I found that I used it as much or more as my larger compressor. I was able to frame, trim and use select shop tools without delay. I have just purchased 2 more of these compressors do to company expansion. I could not find them in stores so I located them on Home Depot web site and ordered them. With the tank size this compressor is not for any application but for its size it has served me well. January 28, 2014
Rated 1.0 out of 5.0 by doesn't work well I bought this new just out of box. Shot one clip of staples thru it and it wouldn't shoot the remainder of staples without having to put pressure on magizine lever that holds the staples. To me the spring in the magazine is to weak. If you put 2 stips of staples in the magazine it will shoot fine, but from then on you have to use your thumb to put pressure on the magazine lever tp provide enough pressure to cycle the next staple December 3, 2014
Rated 5.0 out of 5.0 by Works perfectly It a great stapler work as designed every time not much more you can say no bell and whistles It just a great working stapler. November 29, 2014
Rated 4.0 out of 5.0 by Gun is very light weight, easy to handle. Would like to score 5 star but it lacks a couple of features that other brands have, e.g.. hard case for gun, less expense trigger for trigger sequential. May 30, 2014
  • 2015-08-01T12:23:42.472-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_14, tr_14
  • loc_en_US, sid_202065358, prod, sort_default
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.