Model # KNT65-50-35

Internet #204188118

Hitachi 3-Piece 2-1/2 in. x 15-Gauge Angled Finish Nailer, 18-Gauge x 2 in. Finish Nailer and 23-Gauge 1-3/8 in. Pin Nailer Kit
0754005065303

Discontinued Hitachi

3-Piece 2-1/2 in. x 15-Gauge Angled Finish Nailer, 18-Gauge x 2 in. Finish Nailer and 23-Gauge 1-3/8 in. Pin Nailer Kit

Frequently Bought Together

Product Overview

This Hitachi kit includes the NT65MA4, NT50AE2 and the NP35A. The NT65MA4 15-Gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-Gauge nails from 1-1/4 in. up to 2-1/2 in. in length. The NT50AE2 2 in. x 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8 in. in length up to 2 in. Hitachi's NP35A micro pin nailer drives 23-Gauge headless pin nails, which produce nearly invisible holes. Lightweight and compact, the NP35A may be used in a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.

  • NT65MA4: integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
  • NT65MA4: tool-less, easy to clear nose for quick nail extraction should a nail jam during use
  • NT65MA4: selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch; no tools or parts required
  • NT65MA4: tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
  • NT65MA4: 360° fully adjustable exhaust portal directs air exhaust away from the user or work piece
  • NT65MA4: at only 4.2 lbs. this finish nailer minimizes user fatigue, while increasing maneuverability
  • NT65MA4: 34° magazine angle allows the user to reach into corners or tight spaces with ease
  • NT65MA4: no-mar tip protects the work surface from damage and can be removed if not needed
  • NT65MA4: rubber grip adds comfort and a secure hold
  • NT65MA4: accepts 15-Gauge nails ranging in length from 1-1/4 in. up to 2-1/2 in.
  • NT65MA4: factory installed air fitting is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece
  • NT50AE2: accepts 5/8 in. up to 2 in. 18-Gauge fasteners
  • NT50AE2: selective actuation allows the user to select bump fire or contact fire modes with the simple flip of a switch
  • NT50AE2: at only 2.2 lbs., this finish nailer is lightweight and well-balanced making it easy to use all day long
  • NP35A: large fastener capacity for fewer reloads and less downtime
  • NP35A: magazine automatically adjusts to 5/8 in., 3/4 in., 1 in., 1-3/16 in. and 1-3/8 in. fastener lengths for use on a wide variety of projects
  • NP35A: dual trigger for safe and accurate placement of fasteners
  • NP35A: rear exhaust directs oil and debris away from the work surface

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

3 Questions3 Answers

Customer Questions & Answers

3-Piece 2-1/2 in. x 15-Gauge Angled Finish Nailer, 18-Gauge x 2 in. Finish Nailer and 23-Gauge 1-3/8 in. Pin Nailer Kit
3-Piece 2-1/2 in. x 15-Gauge Angled Finish Nailer, 18-Gauge x 2 in. Finish Nailer and 23-Gauge 1-3/8 in. Pin Nailer Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

How do i order this nail gun and what is the price as the page seems to be missing this information?

This question is from 1-3/8 in. x 23-Gauge Micro Pin Nailer with Carrying Case, Safety Glasses, Male Plug and Hex Bar Wrench
Asked by
Read all my Q&A
April 26, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 11, 2016
Answer: 
JRan32, thank you for your recent inquiry with The Home Depot. Unfortunately, the 1-3/8 in. x 23-Gauge Micro Pin Nailer with Carrying Case, Safety Glasses, Male Plug and Hex Bar Wrench has been discontinued and is no longer in stock or available to be purchased. The item will remain on the website for customer reference, and the description will be updated with “Discontinued” if it has not been already. Read More
JRan32, thank you for your recent inquiry with The Home Depot. Unfortunately, the 1-3/8 in. x 23-Gauge Micro Pin Nailer with Carrying Case, Safety Glasses, Male Plug and Hex Bar Wrench has been discontinued and is no longer in stock or available to be purchased. The item will remain on the website for customer reference, and the description will be updated with “Discontinued” if it has not been already. We may have an alternate item that would suit your needs. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will you still take if returned

This question is from 1-3/8 in. x 23-Gauge Micro Pin Nailer with Carrying Case, Safety Glasses, Male Plug and Hex Bar Wrench
Asked by
Read all my Q&A
February 27, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 24, 2016
Answer: 
Hi Donk, yes, most products purchased on Homedepot.com can be returned however the policy varies between products. This item has a 90 day return policy. To see if an item has a return policy, please refer to the 'Specifications' portion of the item's product page where one row should be titled 'Returnable'. If returning in a Home Depot store, please bring your shipment confirmation email with the bar Read More
Hi Donk, yes, most products purchased on Homedepot.com can be returned however the policy varies between products. This item has a 90 day return policy. To see if an item has a return policy, please refer to the 'Specifications' portion of the item's product page where one row should be titled 'Returnable'. If returning in a Home Depot store, please bring your shipment confirmation email with the bar code or the credit card used to make the purchase for ease of return. Also, please refer to the following link for exceptions and more information.
http://www.homedepot.com/c/Return_Policy
We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 2-1/2 in. x 15-Gauge Angled Nailer and Air Duster with Safety Glasses Hex Bar Wrenches and Case
 
1 answer

what store has in stock?

This question is from 2-1/2 in. x 15-Gauge Angled Nailer and Air Duster with Safety Glasses Hex Bar Wrenches and Case
Asked by
home
Read all my Q&A
July 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 29, 2015
Answer: 
Dear Valued Home Depot Customer,
Thanks for your question.
Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item.
We are available daily, between 6:00 a.m. and 2:00 a.m. (Eastern Time)Thanks The Home Depot User Generated Content Team
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-10-30 T23:58:21.631-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204188118, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 165ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 300 reviewers.
Rated 5.0 out of 5.0 by 2-1/2 IN. X 15-GAUGE ANGLED NAILER - Well worth the investment I found the nailer to be of quality and affordability. The cost I paid made the gun well worth the investment. July 23, 2015
Rated 5.0 out of 5.0 by Great unit. I finished a 550 square foot room with 3/4 inch tongue groove pine w/ this 18 gauge 2 inch nailer and not one board has come loose. During the project i had to remove a warped board that i had nailed down and had to use a crow bar to remove the board. the nails pulled through the board then i had to remove them individually. i am surprised I could complete the project with such a high gauge nail. great little gun, never jammed over the 6 weeks it took to finish the project. February 25, 2015
Rated 4.0 out of 5.0 by Great Gun I like this gun very much it has a full range of nail capacity. It can shoot 5/8" up to 2" brads. The air button on the back makes it easy to clean off what your working on. Some people have complained about it jamming, but if you load them all the way to the bottom of the nail magazine it doesn't seem to jam. I love this gun and would recommend it to friends and family. Hitachi hit on the head again with this one. March 4, 2015
Rated 5.0 out of 5.0 by Great Nailer Much easier to use in awkward positions than the Milwaukee it replace, less kickback. It does leave a larger hole to be puttied than the Milwaukee, but not unreasonable. I hope this nailer is as good as its' predecessor which got rave reviews. But since it was considerably cheaper, I'll let time be the judge. March 10, 2015
Rated 1.0 out of 5.0 by Worked fine for about a dozen times then jammed Used this about a dozen times then it started to jam. The mechanism that pushed the brad nails gets stuck so the pressure to feed the brad nails fails so you get a misfire. Not good to get misfires on your trim. Very frustrating. Today the darn spring that pushes the brads broke. Not happy with HItachi. Not impressed. Will have to buy different brand now. March 8, 2015
Rated 5.0 out of 5.0 by Great air nailer Great for projects small or large. Comes with a case and safety glasses. Very lite weight but does a great job of driving nails up to 2". I love it. February 10, 2015
Rated 5.0 out of 5.0 by just what i needed i needed a good finish nail gun for smaller stock and projects that call for finner brad like when i build a jewelry armoire, this is perfect. It will do larger size but i have another gun(Senco) i use for base boards and moldings and any projesct i need 1 1/2" to 2" nail but many times i needed a good brad nailer and this fits the bill. No complaints, no jams, no problem. January 20, 2015
Rated 4.0 out of 5.0 by Great brad nailer This is a nice brad nailer. Works as it should. Very happy with my purchase! March 24, 2015
  • 2016-10-30 T22:16:29.377-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_300, tr_300
  • loc_en_US, sid_204188118, prod, sort_default
2 3 4 5  ... 11 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 204ms
  • REVIEWS, PRODUCT