Model # KCP-65-50-38-H

Internet #204188125

Hitachi 4-Piece Angled Finish Nailer, 2 in. Finish Nailer, 1/4 in. Crown Stapler and 6 gal. Compressor
0754005053041

Discontinued Hitachi

4-Piece Angled Finish Nailer, 2 in. Finish Nailer, 1/4 in. Crown Stapler and 6 gal. Compressor

Frequently Bought Together

Product Overview

This Hitachi kit includes the NT65MA4, NT50AE2, N3804AB3 and EC510. The NT65MA4 15-gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The NT50AE2 2 in. x 18-gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8 in. in length up to 2 in. The N3804AB3 narrow crown stapler is ideal for internal and external trim work, furniture, cabinetry and other fine finish work. It accepts 18-gauge narrow crown staples ranging in length from 1/2 in. up to 1-1/2 in. The EC510 6 gal. Pancake compressor is ideal for finish work and trim. The oil-free pump is capable of producing 2 CFM at 90 psi and 145 psi of max working pressure. The two universal quick couplers and easy turn drain valve make the EC510 convenient, while the compact, lightweight design ensures easy portability.

  • NT65MA4: integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
  • NT65MA4: tool-less, easy to clear nose for quick nail extraction should a nail jam during use
  • NT65MA4: selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch; no tools or parts required
  • NT65MA4: tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
  • NT50AE2: accepts 5/8 in. up to 2 in. 18-gauge fasteners
  • NT50AE2: selective actuation allows the user to select bump fire or contact fire modes with the simple flip of a switch
  • NT50AE2: at only 2.2 lbs. this finish nailer is lightweight and well-balanced making it easy to use all day long
  • N3804AB3: 0.3 lbs. lightweight and well-balanced for ease of use
  • N3804AB3: selective actuation, easy to reach switch to choose between bump fire or sequential fire modes
  • N3804AB3: tool-free depth adjustment allows for a professional finish with varying materials - simply dial in the desired depth and efficiently finish the job
  • N3804AB3: tool-less, easy-to-clear nose for quick and simple staple extraction should a staple jam
  • EC510: 6 gal. pancake style tank with rubber feet and easy turn drain valve
  • EC510: oil-free pump for long life with no maintenance
  • EC510: two universal quick couplers for fast tool changes

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 78ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

4-Piece Angled Finish Nailer, 2 in. Finish Nailer, 1/4 in. Crown Stapler and 6 gal. Compressor is rated 4.6 out of 5 by 243.
Rated 3 out of 5 by from Good at first This was a great gun at first . Used as a homeowner for trim work. After about 2 years , all of a sudden the nail magazine doesn't close completely . Gets jammed about quarter of an inch from locking closed. A bit disappointed , thought it would last longer. That's why IU cannot recommend it.
Date published: 2016-10-24
Rated 5 out of 5 by from Flawless Sparked at first but settled in and worked perfectly. I am midway on two thousand feet of oak hardwood flooring. It replaced my old Senco and is nearly as good, even new Senco is not the old Senco.
Date published: 2016-08-28
Rated 1 out of 5 by from Do Not Buy I am a commercial/ residential cabinet installer. I did not even take this compressor to work and yet it failed me with a week or so of use. I lost the receipt, and chose to fix it myself. I have had to weld one of the compressing valves shut just to make the piece of junk ....useable? I still peek out at 105 psi and have to shut it of before the motor overheats. I do not write reviews on any products, however, this product was the biggest waste of my money and truly deserved it. Save those receipts kids!
Date published: 2015-07-12
Rated 4 out of 5 by from Dosen't work well in cold weather Have to warm it up before using when temperature in below 35
Date published: 2015-12-15
Rated 1 out of 5 by from Good concept but disappointing I do finish carpentry professionally and this unit could not keep up with a couple of finish guns. I burnt it up just after the warranty expired. I have read a lot of similar bad reviews. I expected more from Hitachi.
Date published: 2014-01-22
Rated 3 out of 5 by from plastic magazine and and nail feed Purchased the nt50ae2(s) new a while back and was sceptical of the plastic magazine and spring carriage. Too much clearance ( slap) between critical moving parts which require fine tolerances each and every time.Main body and firing still in top condition- never dropped or been under abnormal working conditions. obviously inside fit outs etc. Pins work their way between plastic body and nail feeder....a real pain which creates misfires.Trying to figure out how to retro fit a better metal feeder off one of my old cc braders which for years never failed. Guess if you discount the nail problem - a fair little tacker.
Date published: 2015-07-11
Rated 1 out of 5 by from this product bombed I recieved my little compressor My kids bought for my birthday. It worked fine for a little while but then it started stinking come to find out the motor was burning up ,I do not use this compressor everyday so it should not have burned up, now I use it for my brad nailer around my house and the kids tire now and then. So now what I have to buy a new motor , I guess if I knew ware to pick one up , I would the ec510 was fine for what I do with it, but now its dead.
Date published: 2015-05-04
Rated 1 out of 5 by from Patricks I'm a carpentry contractor. I really liked this little unit. Really! Until one of the carbon brushes cracked/broke. And, what a surprise; the brushes are not for sale anywhere I could find. Now, that is just NOT what I expected. I was told I had to buy the whole pump/motor. Crazy. I have a number of Hitachi power tools and they have served me and my crews well. But this unavailability of a high-wear part is nonsense.
Date published: 2015-01-17
  • y_2016, m_12, d_9, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_243
  • loc_, sid_204188125, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT