Rated 3.3 out of 5Â by 39
Rated 5 out of 5Â by Itsdaking Excellent product!
What a great option to replacing with a new tub! My tub is 38 years old and looked it. A new tub wasn't in the budget. For less than $40 dollars and some time you can have a nice looking tub. I read a lot of the reviews and clearly an experienced person will have an easier time applying this. With that said here's what I found to be true. First the tub was not even close to being ready in 3 days. I left it to cure for 2 weeks. Keeping the temperature at the specified 72 degrees seemed to help as I could tell the difference in the drying when it was hotter. Second don't use a cheap brush. The bristles will break off and get stuck in the epoxy. Also, I used both a brush and a roller. On the first coat I was just going to use the brush to get in the corners but it went on so easy that I just went ahead and finished with the brush. The second coat I used the roller and used the brush in the areas that were not flat. The roller worked really well to coat the flat areas. If you have basic knowledge of painting and know how to paint with a "wet edge" then you shouldn't have any problems doing this tub. To the one reviewer that ended up with an "Almond" color I think the issue was not stirring the epoxy long enough for it to become white. Again experience with painting will go a long way with this product. Last thing is this product is not perfect or equal to a new tub but for the price this is a great product and well worth the effort. I'm going to use it on my other tub and my sinks too!
May 19, 2014
Rated 5 out of 5Â by SFgal HIGHLY RECOMMEND for those on a budget! Saved us a bundle.
We recently purchased a house, but it's a bit of a fixer-upper and we can't afford to replace everything, so I started google searching budget remodel ideas and eventually found the though-as-tile product. I figured if I could give our (split) bathrooms a facelift for less than $40/box it was worth a shot. I purchased 4 boxes of the brush-on product ($37ea), picked up a vanity on sale($99+$30 faucet), and a new light fixture ($50) and spent a 3-day weekend on the project. i used the product to paint the tiles on the walls and in the shower. i did not use the product on the tub itself. i used an electric hand sander with 35-40 grit sandpaper (there are warnings not to do this that it will tear up the surface, but I did not have an issue), and i prepped the surface thoroughly once. Honestly if I'd have had the patience I definitely think a second or third prepping session would have been a good idea (instructions say to prep 3x). The actual painting part takes much much MUCH longer than I had anticipated. The paint is thick and sticky, and you really need to apply it in relatively thin coats for an even finish. Also found that the instructions aren't kidding when they say to paint in a single direction with overlapping strokes. If you think this stuff will go on just like painting a wall in your living room, you are wrong. If you are painting a large area it will take a long time and it will be painfully slow at times. I also didn't follow the instructions about using a good quality mask (or any mask at all) and I was quite ill with a horrible headache the next day... but a few advil and it eventually went away. It took 3 cans of the product to paint 2 coats for my project. I kept the 4th can for touch ups, and turned out I needed it though not a lot. When I taped the tiles to paint the walls, some of the tough-as-tile paint pulled off when I removed the tape. There were only 3-4 bits that pulled off, and the amount that pulled off was smaller than a fingernail size. I just touched up the few spots with the extra product, no biggie. I think the bits might not have pulled off had I done the 2nd or 3rd recommended sanding/prepping sessions... Definitely wait the full 72 hours cure time per the instructions too!... All in all we're very pleased with the results. It's been a couple weeks since we painted the bathrooms, and so far so good! We were able to completely re-do the (split) bathrooms for less than $400 and would highly recommend this product to anyone with icky tile to cover on a budget.
November 28, 2013
Rated 4 out of 5Â by WhenHubbyIsAway A great value - buy the mask!
We are planning on renovating our bathroom in about a year; in the meantime, however, I was hoping to do something to make the bathroom aesthetically appealing - the forest green & red tile and green wainscoting was driving me nuts. I decided to take on this project this past weekend, while the hubby was out of town. I purchased 2 kits to cover the shower. I spent about 6 hours just prepping the tile - lots of scrubbing and rinsing! I read from other reviews to use a roller - I am SO GLAD I did! Even though the directions say to use a brush, I found it a tad hard to get a even coat. The brush did leave a nice gloss finish - where the rolled layer has a tad bit of texture, which I like - another bonus of using the roller. The first coat took 50 minutes to apply, which was longer than I expected. TIP: BUY THE RECOMMENDED RESPIRATOR MASK!!! I did, and was SOOOO happy for it! After the first coat, I was worried, because I could still see the hideous green tiles and it appeared a bit spotty. After I finished the first coat, I immediately did an additional coat on just the green & red tiles, which I'm glad I did. 3 hours later I applied the 2nd coat, which took about 45 minutes, and again did another coat on the green & red tiles - so a total of 4 coats on the dark tiles. TIP: When covering dark tiles, apply a thin layer and wait for it to set & then LIGHTY recoat (I did them first & last of each coat ~ 40 minutes between) - do not push hard when putting another layer of epoxy over the dark tiles and it will spread the epoxy too thin and expose the dark colored tile. The smell is STRONG - I had all the windows in the house opened the whole weekend - with a strong wind the smell was basically gone after about 24 hours. As the epoxy cures, we are keeping the bathroom door closed and window open.
We are giving the shower 2 weeks to cure before using, so I can't comment on its utility, so I gave the product 4 stars. Over all, it looks GREAT - both from afar and up close. This product is an excellent value & it certainly met all my expectations!
May 5, 2014
Rated 1 out of 5Â by JerseyKat1 Didn't Work
We bought two of this product to refinish the bathtub and surround. Followed the directions to a T as my nephew who applied this is a professional painter. Looked nice in the beginning, but then it began to peel off, at first a little, then a lot. Ended up buying a new bathtub and having the surround tiled. This was a huge waste of money, not to mention time, energy, drying time, inconvenience, stink and disappointment. Attached photos show the paint beginning to peel, but it got far worse and the peeling paint would prevent the water draining from the tub as it would collect in the trap. What a mess.
July 2, 2013
Rated 5 out of 5Â by Mike Product yields decent result for money
I purchased and applied this kit in August of 2013 but held off writing a review as I wanted to see how well it held up to use. So far so good. Hate to be critical of other reviews, but some folks need to learn how to read directions. First this paint smells strongly of solvents until it dries completely, and yes, I would advise wearing a respirator. Why this a surprise to some of the users I have no idea. The directions clearly warn of fumes and that application require adequate ventilation. It's like just because the paint is creme colored they expected it to smell like a vanilla scented candle.
Second...don't expect this whole process to take five minutes. The application is not fun but if you stick to the rules it will turn out pretty well. And when I say "well" I don't mean "perfect." If you want perfection hire a professional to completely replace the old tub/tile and pay the price which is 20 times the price of this product. If you want an updated look that is attractive but has a somewhat imperfect finish for 50-100 bucks that you can do yourself... this product is for you.
Also be mindful that if your temp and humidity isn't absolutely ideal, you may have to give dry time an extra day or two. Slow down and realize your shower may be out of commission for 1-2 weeks depending on the enviroment and how quickly your able to work. You may have to wait longer for dry times before using. The longer you wait before using the stronger it will be. If this possibility is unnacceptable then maybe you should look for another remedy.
Finally, I have found the finish to hold up well under normal use for the 8+ months since application. But realize that this paint (like any other) is not some sort of impenatrable force field. If you are tightening a shower fixture and end up dropping a wrench on the finish....it will chip and/or flake. I don't view this as a defect or flaw with the product. Guess what will happen if you hit the paint or finish on your car, wall, or hardwood floor with an iron wrench.
Dont know what will work for other folks, but I used a roller to apply. Much easier than the brush. Directions reccomend the brush as a roller may affect the finish. They are correct, but the almost imperceptable stippling effect of the roller doesn't bother me. I also used three coats of paint although the instuctions didn't call for it. I let each coat dry in between as instructed then gave the shower one whole week before using. Also remember that using this paint doesn't suspend that laws of physics or change the physical properties of water. Basic rules of plumbing still apply, you need to use caulking to seal as appropriate.
Overall a decent product. I wrote this review mainly because the negative reviews I read almost prevented me from purchasing product. I found some of them to be innacurate in my experience and wanted to share this perspective.
March 27, 2014