Rated 2.7 out of 5 by 12
Rated 1.0 out of 5.0 by AR Looked cheap, returned
Material looked cheap, and we were unhappy with the overall finish. Returned it for a higher quality alternative.
August 30, 2016
Rated 2.0 out of 5.0 by Randy Not all it's cracked up to be.
Does not hang tightly to mounted internal bracket.
August 23, 2016
Rated 4.0 out of 5.0 by Cottage413 Bathroom shelves
The shelves arrived well packaged and without damage. As others have noted, the quality isn't great. The edges are easily dinged. Installation was fairly easy but the shelves need to be shimmed to be flush with the wall. There's too much play in the holes provided for the rods that support the shelves. Once installed they looked great!
August 16, 2016
Rated 5.0 out of 5.0 by BethD Floating shelves - great purchase!
These were easy to install and look great on the wall!
July 19, 2016
Rated 4.0 out of 5.0 by ST Great shelves, with a little modification
So, I got this advice from a reviewer on Lowes and thought I should share. I bought them from Home Depot as it was closer to my house.
I have already installed five of these shelves, four 17.6 x 7.75 and a 35.4 x 7.75. Pictures are attached. Here is what I did differently to make these shelves sturdy and avoid bending (drooping).
First things first, avoid the plastic hardware that comes with it. The only hardware I used from this kit were the wooden screws for the stud I used for 2 of the 5 shevles. Where studs are not available, the plastic bolts are supposed to be used. Instead, spend a few more bucks and get you some toggle bolts. I got this 25 box set of 1/8in by 2in from home depot. Link: http://www.homedepot.com/p/Crown-Bolt-1-8-in-x-2-in-Zinc-Plated-Mushroom-Head-Toggle-Bolt-Anchor-10242/100349321
These bolts cost $5.21 at Home Depot. They are metal and a lot stronger than the plastic things that come with the shelf. They also allowed me to only place 4 bolts into the bracket instead of using all 10 holes. *Note: toggle bolts are one time usage and make rather large holes. A little patching will fix that if you remove the shelf*
Second, and may be the deal breaker for some, I put the shelves on upside down, requiring the two screws to attach the shelves to the bracket, to be placed on top. This places the stregnth on top of the metal bracket instead of pulling it below. Most of my holes were covered by the items I placed on the shevles. For the one screw that shows, I placed a little pure white paint on top of the hole and it blends in. As you can see from the pictures, I have many trophies on the shelves. Behind my Avengers bobble heads, I have a collection of Coke glasses. I haven't figured out what to do with them yet, so for now they are kept safe there. Point is, there is easily more than 10 pounds on my long shelf. Take my advice that I stole from a Lowes reviewer, and you to will find satisfaction in these attractive shelves.
I will be installing two 23.6 x 10.2 very soon in the same way.
November 28, 2015
Rated 5.0 out of 5.0 by Dmcnatt Easy to mount
Easy to install. Just what I needed. Would recommend to other buyers. Not deep enough for a dinner plate if using in the kitchen.
May 10, 2016
Rated 1.0 out of 5.0 by bill More like a sinking wall shelf than a floating one
Useless. Despite my mounting the backplate to two studs and using hollow wall anchor for the rest of the holes, this shelf will not hang straight. It slopes downward. It's designed improperly. The shelf has two bars that go into the shelf, but the bars don't go all the way to the front of the shelf. So the shelf slants down. Also, there should be three bars holding the shelf up instead of two. Home Depot should know better. I'm going to modify this one but I'm taking the others I bought back to the store.
April 26, 2015
Rated 5.0 out of 5.0 by ShelfQueen Sturdy for a floating shelf
Love the shelf! Much stronger brackets than other floating shelves I have.
February 11, 2016