Model # 0512890100

Internet #202049019

Home Decorators Collection 30 in. Cord Cover Antique Brass 30 in. L

Home Decorators Collection

30 in. Cord Cover Antique Brass 30 in. L

$10.00 /each

Frequently Bought Together

Product Overview

Our popular collection of swing-arm lamps has an electrical cord dangling from the base. This electrical cord cover solves that problem. It puts that unattractive cord under wraps for a better looking, safer-lighting design. Put the perfect finishing touch on that swing-arm wall lamp in your home. Order now.

  • 30 in. L x 5 in. W x 5 in. D
  • Easy assembly, just screw into wall
  • Finishes coordinate with the swing arm lamp collection
  • Metal




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question3 Answers

Customer Questions & Answers

30 in. Cord Cover Antique Brass 30 in. L
30 in. Cord Cover Antique Brass 30 in. L

Ask your questions. Share your answers.

Clear Search Term
3 answers

Is there an opening on the back side of the cord cover so that you can lay the electric cord in it from the back?

This question is from 30 in. Cord Cover Antique Brass 30 in. L
Asked by
April 10, 2012
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Louisiana, USA
Read all my Q&A
August 22, 2012
The cord cover is in three pieces. There is a wall mount which you install below the lamp with a couple of screws. After that, you lay the cord inside the mount and just snap on the two 15" pieces of the cover. Very simple installation and looks great!
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
April 24, 2012
There is one separate mounting strip that is about 12" long which the cord lies in then the two 15" cord covers snap over the mounting strip. The mounting strip should be positioned on the wall so that it is in the middle of the full length of both the cord covers since it holds both. This sounds a little strange but it is a very secure fit.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
St. Louis, MO
Read all my Q&A
April 11, 2012
The Home Decorators Collection 30 In. L Cord Cover comes in three parts. Two 15" channel pieces and a cover. The two channel pieces are mounted to the wall and the cord runs through them. The cover piece is then placed on top of the cord and channels.
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-10-31 T16:29:31.178-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202049019, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms

Customer Reviews

Rated 4.2 out of 5 by 107 reviewers.
Rated 5.0 out of 5.0 by 30 inch cord cover I have several of the swing arm lamps and cord covers from HDC and needed one more cord cover for one of the swing arm lamps. I was able to order in the same finish as the lamp so all of them match. For me, it was easy to install as I have installed them before. Hardware (screws and anchors) are included along with instructions. Packing was great--no damage to the cord cover. Really like these cord covers to hide the cords from the swing arm lamps. They give a clean line appearance to the lamps. I recommend them if your cords will be visible. September 28, 2016
Rated 2.0 out of 5.0 by brass cord covers I ordered these to replace ones I had since I was replacing the lamps. They aren't nearly the same quality as what I had. I should have just kept those. August 18, 2016
Rated 2.0 out of 5.0 by Cord Cover Not good The cord cover requires you to first mount about a 12-inch a strip to the wall and the cover mounts onto that strip. The cover is in two pieces and the mounting strip is too short for the cover to stay securely mounted. It "flops" loose at the top and bottom. The mounting strip needs to be at least 24-inches long. I had to go buy a piece of plastic wiring channel from Home Depot to supplement the mounting strip and then glue the pieces together. The cord cover looks very good, but prepare to have to do some work-arounds to make it work. I still gave it a recommendation because, in spite of its shortcomings, it is better than a dangling cord. December 23, 2008
Rated 5.0 out of 5.0 by Excellent Accessory for lamp This cord cover completes the classy look and style of the swing arm lamp. No messy cords showing! September 10, 2015
Rated 5.0 out of 5.0 by Hide those power cords A must for the swing lamps I purchased here. Hides the power cords, and keeps them out of harms way with a professional look. If you have dogs kids, or just want that last finish detail, buy these. I can thing of many locations that could benefit from these. Lots of finish options also, and solid mounting options. Light weight enough that if you don't want holes, glue them. I did. There are many products on the market to remove glue residue, just make sure you use a high quality glue that will adhere to the product and mounting surface. A great looking quality product to eliminate dangling, and dangerous power cords. February 3, 2009
Rated 2.0 out of 5.0 by You get what you pay for... I had been wanting cord covers for the sconces in our bedroom for years... finally broke down and got two of these in the brushed steel... however I guess you get what you pay for because they are obviously not a high quality item. They arrived with several dings, dents, and scratches on them. I haven't hung them yet but once I get them up on the wall I'll see if the imperfections are still noticeable from a distance. Luckily most of the cord cover will be hidden by our bedside tables so it's really just to conceal about 6" of visible cord. We'll see... July 11, 2013
Rated 4.0 out of 5.0 by It does cover the cord From a distance the cord cover looks fine and it does cover the cord, so I'd recommend it to a friend, with reservations. The cover comes in two parts and fits over a metal sleeve that one screws onto the wall. The cover however is too tight to fit easily or slide easily on the metal sleeve. I had to use a small wedge to open the cover enough to fit it on. I've used cord covers before and they do need to be snug. This was more than snug, but I did get it on. Because one has to pry the cover to make it wider, it is easy to bend the edges. That happened to me. The top of one section is now slightly bent and so doesn't fit exactly flush with the top section. It is hardly noticeable but I know it is there. So, buy this product with those caveats. January 21, 2011
Rated 3.0 out of 5.0 by Looks okay, but very unsturdy I bought two of these cord covers for some vintage wall lamps that I had rewired. They're easy to install and look good, but the covers almost fall off every time I turn the lamps on or off. I'm thinking I will figure out a way to secure them better to the wall, but I haven't done so yet. So just be aware that you may have a little extra work on your hands. October 15, 2014
  • 2016-10-31 T00:58:45.833-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_107, tr_107
  • loc_en_US, sid_202049019, prod, sort_default
2 3 4 5 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms