Rated 4.6 out of 5 by 77
Rated 5.0 out of 5.0 by JB This wrench functions as expected. Very nice polished finish
October 25, 2016
Rated 5.0 out of 5.0 by Jesse Quality inexpensive wrench
Removing an EGR tube fitting that has been 'welded' to the EGR body from exhaust heat is nearly impossible; the fitting corrodes onto the tube and the EGR elbow. Oddly, more heat is usually necessary. The other necessary thing is a properly fitting wrench. A large fitting deforms, even without the heat; add heat and it deforms more. So you need an open end or crowfoot wrench that fights tightly. I bought the Husky 'cause I could measure it; also because I was planning to pound on it with a sledge hammer. I got the fitting off and, surprise surprise, couldn't see where I pounded on the wrench.
December 15, 2015
Rated 5.0 out of 5.0 by RudderPusher Great polish and fit.
October 25, 2016
Rated 5.0 out of 5.0 by KeepingItOneHundredEveryd Perfect fit for Rogue Fitness Inifinity Series Bolts
Perfect fit for Rogue Fitness Inifinity Series Bolts. This with the combination of the 15/16 deep impact socket fit and work perfect together.
September 20, 2016
Rated 5.0 out of 5.0 by cungewitter Wow. What a wrench!
It's not every day that you need a 21mm, 12-point metric wrench. But if you do need one, you'll have to WRENCH it out of my cold, dead, fingers! I put this bad boy on a 21mm bolt, and BAM! Popped that sucker right out of there. With the length that this miraculous piece of engineering has to offer, getting leverage was so simple that a blind-folded six-year-old could do it with their hands tied behind their back.
Do you have a 21mm bolt to tighten or loosen? Look no further! This is the real deal.
Pro Tip: Don't mistake this for a 12mm wrench by looking at it upside-down. It's not the same thing, even if you use it upside-down.
November 10, 2015
Rated 5.0 out of 5.0 by DJW63 Fine quatlity tools
I needed this size of wrench to tighten equalizer cables on my new BendPak lift. I'm becoming a fan of Husky tools, they seem to be of very high quality and work as designed.
January 12, 2016
Rated 5.0 out of 5.0 by JMW Great buy!
I needed to replace 1 wrench(3/4 in. 12-Point SAE Wrench) without having to buy a whole set which is why I liked purchasing this one online @ HD without having to shop around at brick & mortar stores. Price was great as well as availability. Thank you Hoime Depot.
August 16, 2016
Rated 5.0 out of 5.0 by BillyBob good cheap wrench
Good cheap wrench.
I needed to make a crowfoot wrench to remove the EGR tube from my exhaust manifold. The EGR tube is held in place by a 24mm nut which has been pretty much welded into place by the engine heat, so, i needed to get maximum torque on the nut. I took my trusty dremel tool diamond cutter disc (also purchased at home depot a few years back) and cut two notches out of the socket part of the wrench. This worked perfect as I was able to put some serious torque on the nut without rounding off the corners with a regular wrench. Any folks out there have searched for a high quality crowfoot socket wrench, they know the cost is on the order of $80 if you can find just one. For $5.99 and a bit of labor using my existing dremel tool I now have a perfect crowfoot socket.
I am impressed with the quality of these cheap wrenches. Having cut into one with a diamond blade I can attest that they are pretty tough. It has me rethinking things about cheap tools. Maybe Snap-On tools should be concerned?
August 16, 2016