Husky 1/4 in. Angle Die Grinder-DISCONTINUED-HSTC4715 - The Home Depot


Model # HSTC4715

Internet # 100678388

1/4 in. Angle Die Grinder-DISCONTINUED

Husky 1/4 in. Angle Die Grinder-DISCONTINUED

This item has been discontinued.
The Home Depot no longer carries this specific product.

$49.98 / each


Model # HSTC4715

Internet # 100678388

The Husky 1/4 in. Angle Die Grinder features a 5:4 gear reduction to provide increased stall torque and provides a grinding speed up to 20,000 RPM. Critical components have been heat-treated with a proprietary process for performance while the grinder also features a sealed ball bearing design. A soft-touch coating offers greater user comfort for extended use. The grinder has an air consumption rate of 4 CFM at 90 psi.

  • 5:4 gear reduction for increased stall torque
  • Maximum grinding speed of 20,000 RPM
  • Aluminum housing with a soft-touch coating
  • Sealed ball bearing construction
  • Proprietary heat treatment of critical components
  • 1/4 in. NPT plug
  • ANSI spec collect
  • 90 psi recommended operating pressure
  • Rear exhaust location
  • 4 CFM air consumption rate at recommended operating pressure
  • 3-year limited warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Air Inlet Size  1/4 in  Assembled Depth (in.)  8.3 in 
Assembled Height (in.)  1.7 in  Assembled Width (in.)  5.7 in 
Product Height (in.)  1.6  Product Length (in.)  8.3 
Product Width (in.)  3.5  Wheel Width (in.)  0.25 
Accessories Included  No  Air Tool Type  Grinder 
Air consumption at recommended operating pressure (CFM)  Case Included  No 
Grinder type  Angle  Grinding Wheel Included  No 
Housing Material  Aluminum  Included  No additional components or accessories are included 
Maximum grinding speed (rpm)  20000  Project Type  Surface Prep 
Recommended operating pressure (psi)  90  Returnable  15-Day 
Spindle Lock  No  Tool weight (lb.)  1.6 
Tools Included  No Additional Tools Included  Tools Product Type  Power Tool 
Warranty / Certifications
Manufacturer Warranty  2 Year Limited Warranty 


Rated 3.5 out of 5 by 16 reviewers.
Rated 5.0 out of 5.0 by It works great and has good power for the money I have about 20 hours on this die grinder and I must say that I'm very happy with it. It has done all that I ask of it and never gives me any problems. I had to return the first one I bought because after I opened the box it looked like some one drove over it with a truck. So I went back to home depot and got another one. This time the product in the box was in great shape. I installed the air chuck, oiled the tool and I put it to use. I use the tool for removing build up on mower blades and other rusty surfaces. I only use sanding wheels and wire wheels on this grinder so I can't tell you how it would work with a grinding stone. The trigger has good speed range and the tool over all is easy to control and handle. It has some weight to it which is a good thing. I bought this tool because I also have the Husky 1/2 inch impact gun (350 foot pounds) and the 3/8 impact gun. both of those guns have been in almost constant use for about 3 months now and all I do is clean and oil them at the end of the day. I think that all of the problems that people are having with this product is that they don't oil them everyday like there are supposed to. If you don't oil any air tool it will wear out or break in no time. The seals will also dry out which will make the tool leak over time. If I had to buy this tool over again I would the same goes for my 1/2 inch and 3/8 impact guns. May 22, 2011
Rated 5.0 out of 5.0 by Great value, but an air hog. I've only put about 12 hours on this tool, but it saved me a lot of money to be able to do the project I needed to get done. In case you're as ignorant of air tools as I was a few weeks ago, this thing is an air hog. I bought the Husky 20 gal compressor rated to deliver 4.3 cfm @ 90 psi and it can't keep up with this tool. I get about 1 minute of use at full RPM, followed by about 3 minutes of tank recovery on the compressor. If you want to be able to use this continuously without having to twiddle your thumbs for 3 out of every 4 minutes while the tank refills, you'll need a 60-80 gallon tank compressor to feed this tool. I don't have a lot of money to throw at a compressor or air tools right now so my $179 compressor and this $50 tool did what I needed to get done. It took me longer than it would have with a workhorse of a compressor, but I stayed in my budget for the project. All in all, I'm extremely pleased with this grinder, especially for the money. At $50, this is one of those tools that pays for itself in about an hour of use if it saves you from having to pay someone to knock out the project for you. May 27, 2010
Rated 5.0 out of 5.0 by Very useful tool Once upon a time, many years ago, I did automotive repair for a living. I have a complete set of name brand pneumatic tools such as impact wrenches, die grinders, drills, ratchet and chisel. They're all very old but still function...kind of. Every morning I check Home Depot's site for their "Special Buy of the Day" and these Husky air tools were on special so I bought one of everything. I'm not disappointed, they work great. I didn't realize what sad shape my old tools were in until I began using these Huskys. They're far more powerful, use much less air than my old ones and have a two year warranty. I am very satisfied with this purchase. July 28, 2014
Rated 2.0 out of 5.0 by Locked up as soon as air was hooked up After disassembly and reassembly ,it seems to be working fine though. January 21, 2014
2 3 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.