Rated 3.4 out of 5 by 21
Rated 1.0 out of 5.0 by frustrated these are garbage
purchased from depot , brought home , installed , housing cracked ....took back to depot exchanged for new , took home , installed , housing cracked ....took back to depot for full refund .....went to tool store bought different regulator , took home installed , and geez worked as expected ......husky brand is not good , don't waste your time !!
I WOULD NOT RECOMMEND THIS TO ANYONE LET ALONE A FRIEND
both regulators split at at the seam in the cheap metal when you screw in your fittings
February 27, 2016
Rated 1.0 out of 5.0 by Mechanic Pour Quality Material
The housing for the adjustment knob broke off of unit during install. I noticed the metal housing is cast less than 1/16" thick. Closer to 1/32". Not recommended. Look for a milled unit or at least machined brass
February 12, 2016
Rated 1.0 out of 5.0 by k4zmb Cheap, Useless, poor Quality
Gauge broke at first use, dial wouldn't go above 70 psi, unreliable..
February 10, 2016
Rated 1.0 out of 5.0 by Herb Husky Air Regulator
Leaked out adjustment knob immediately. Evidently inferior product from factory.
December 8, 2015
Rated 5.0 out of 5.0 by BigA1969 Buyer Beware!
Junk! I have purchased my second regulator from here and both after you very slightly tighten, they develop a crack in the cheap metal used.
November 28, 2015
Rated 4.0 out of 5.0 by TAL 1/4 IN. BLACK AIR-COMPRESSOR REGULATOR WITH GAUGE
I was losing air via my regulator on my 175 psi compressor.
Just had to remove some tubing to put it on.
Have to get another one for my pancake compressor.
October 27, 2015
Rated 1.0 out of 5.0 by woodgu Poor quality
I have purchased 3 of these to date and every single one of them leaks making the compressor kick on all of the time. I am looking for something that works now.
September 15, 2015
Rated 1.0 out of 5.0 by Brando4 Air Flow is wrong direction
I have a 12 year old Husky 26 gallon 1.7 HP compressor. Pressure regulator had a slight leak and was getting worse. Found this at HD and when I got old one off I discovered the airflow was the opposite. Right by the air flow direction arrow on the bottom of the part is an L (left) or an R (right). I need a right one but these are left. Also my gauge needs to face up not to the side so I was going to use my old gauge. Took back to the store and will live with the leak until I get a new compressor.
May 15, 2015