Rated 3.7 out of 5Â by 90
Rated 5 out of 5Â by 2gtsvette Robust Air Compressor
This is an excellent value air compressor. The unit is a bit heavy so you'll need help getting it home. Setup a easy. All you need is to install the wheels and your good to go. The compressor is a bit loud but bearable. It takes about 7 minutes to till to max (150psi). The compressor can do 5.0 scfm @ 40psi and 4.0 scfm @ 90psi. This enough for most household projects and air tools. Overall I am very happy with this compressor, its easy to move around, recovery rates are decent and its well made. I would recommend this to any looking for a value 20 gallon air compressor!!
July 8, 2014
Rated 5 out of 5Â by DennisJ Plenty of Air
Couldn't ask for an easier, ready to use air compressor. The only thing I had to do was to put on the wheels, and these are no cheap wheels either. Very well made 7 inch wheels. After the wheels are on, it's ready to go. Just plug in a quick release hose and get to work. It took just under seven minutes to fill to its maximum pressure, 150 psi. Its small and easy enough to move around, if needed, and the pressure to do what I need around the house. Very well constructed. The gauges are up high and easy to read. It has a nice heavy duty cord, oil and maintenance free motor, 120v 1.5hp motor, 2 year manufacturer warranty. The weight on the label says 106lbs, but it feels lighter than that on the concrete floor. I maxed out the pressure and left it for a few days, no hose attached, and no loss of air at all. None! This is the perfect size and unit for around the house use and more. I really like this one.
June 2, 2014
Rated 5 out of 5Â by MikeG Husky 20 GAL Portable Air Compressor is Awesome!
The features are a huge plus for me especially since the unit is oil-less. It's easy to move about and takes up a very small footprint compared to my old craftsman compressor. The maintenance for this compressor is almost non-existent with the only thing to remember is drain the tank from time to time. It doesn't take forever to fill to full as some people have mentioned (probably use to a larger model etc.) It is louder than an oil fill unit but that is to be expected with minimal lubrication but it surely shouldn't be a drawback unless you intend to use indoors and that is pretty unlikely. The customer service was excellent as, as soon as I walked up to the service desk, I was waited on almost immediately and helped by Kyle the store manager of all staff! What a pleasant purchase online and the pickup - they even had a staff person help me lift the unit in to the back of my Escape!! I keep my new "baby" in the storage room of the house when not using it. I have to create a secure location in the carport so is doesn't disappear :)
January 7, 2014
Rated 5 out of 5Â by nivek What will you be using it for?
I've been using this compressor constantly with a number of tools and have not had an issue. The true question you have to ask yourself is what will you be using this for? And making sure that the compressor matches with the the amount of air scfm the tools requires to operate good. Also, be sure to read the instruction manual before using. Things like draining the valve under it every hour can go a long way.
What have i used this for?
I recently painted a whole 4x4 short bed Nissan truck. Now i knew that a 20gal compressor was not going to keep up with painting the whole truck at one cycle so i painted sections at a time and then like the compressor refill to insure i had the recommended 40psi going through my Husky HVLP. The results where beautiful. I couldnt be happier knowing i spent 160 on this compressor. Below are the estimated continuous run times before the compressors starts to loss the tools recommended psi scfm due to not cycling fast enough to keep up.
Husky Gravity feed HVLP- 3min @40psi
Husky DA Sander- 2min @ 100psi
Husky Air Blow Gun- 1min @100psi
Harbor Frieght 3'' cutter- 2min @ 60psi
Iwata Airbrush- For every @30psi
Again, this compressor will not keep up for large projects such as painting a car. But it is possible if you do it in sections and have patience waiting for it to refill with air.
June 22, 2013
Rated 5 out of 5Â by ThisOldGarageNJ Great Deal For the $$$$$
The Husky 20 Gal compressor gives the
appearance monstrous unit...Its not monstrous but its
a terrific deal for the money spent.
The Machine came very well packed assuring no damage
After unpacking and making sure all valves
and drains were closed I plugged it into a
dedicated 20 amp GFCI receptacle line I have in my shop.
(the reason I use a GFCI is the plug is often used
for outdoor work)
Turning on the compressor I then turned the valve to
80 psi and put on my 50 foot hose with a splitter on
the end, then a
addidional 2-25 ft lines on the splitter and attached
2 air nailers.
With my assistant, we worked on my custom fence I'm
building around my back yard, Both Nailing at the same
time. Nailing through 1/2 - 1 inch strips of Pressure
Initial fill took about 6-9 minutes and with the 2
nailers working it cycled about every 30 minutes
and Worked Flawlessly throughout the day.
Next test was my 3 Inch air angle grinder. Setting the
pressure gauge to 70 psi(its a 4 C.F.M unit) I could run about
15 min betweencompressor cyclings. Getting plenty of
air to the tool.
The small upright size makes it take up less room
in the garage, while still light enough to roll to my truck
and lift it in the back for moving to a jobsite..
A test with my sound meter showed it produced 70 Db at 10 feet
in an enclosed space, Not really noisy compared to others on the
market. My smaller 4 gallon pancake compressor came in at 85 Db
(hearing loss begins at 80 Db of continuos Noise)
A quick search on the web also showed that the Husky unit is
manufactured for HD by Campbell Hausfeld, A very reputable name
Overall I would give this compressor a great rating for anything
from blowing out sprinkler lines to medium use air tools for the
March 4, 2013