Rated 2.6 out of 5��by 14
Rated 2.0 out of 5.0��by abuya1939 Nice but not wall mountable
I was unable to use this product as it did not have any mounting bracket to attach it to the wall.
August 16, 2016
Rated 3.0 out of 5.0��by Paul Decent home-shop regulator
Decent home-shop regulator. Not a heavy-duty type like heavy users will need. It regulates, but sticks a bit, and the construction is light-duty. Price reflects this, value is good.
Gauge is reasonable size for occasional reference. It can be assembled either side to suit your layout. Plug provided for the unused port. Gauge and plug have sealer pre-applied.
Regulators are directional! There is an IN and an OUT, and arrows too.
Regulators hate dirt. If your old regulator failed, it may be from dirt in the system, or the failing regulator may have shed debris in the lines. Blow them out. Put a good filter (maybe not your old filter!) before the regulator!
June 4, 2016
Rated 5.0 out of 5.0��by lilrabbit Pressure Drop oh yeaaah!
In my school shop I share a large industrial compressor with the maintenance department. For whatever reason, they keep the compressor at 150 PSI, which is more than I want to push through my finish nailers or have available for students to pump up their bicycle tires. So I put this between the compressor and the air drops in the shop and stopped the pressure down to a safe and sane 90 PSI.
Seems reliable after 3 weeks of use. Easy to install and easy to adjust.
May 31, 2016
Rated 1.0 out of 5.0��by scott Cheap
LOL...installed turn on the air flow and nothing..when I turned the knob it fell off..I guess I should not be surprised, you get what you pay for.
February 26, 2016
Rated 5.0 out of 5.0��by rva116 great product for replacing a leaky one.
This regulator was easy to install. Pressure adjust easily and has good air volume. only thing missing was a wall mounting bracket. I made one to fit my application. very satisfied.
October 6, 2015
Rated 1.0 out of 5.0��by Jim Junk Regulator
Bought this thing in 3 months it developed a leak from the cap area like so many others on this site I can say Husky needs to make it right and not sell this model Regulator its no good HDA70703AV AND Home depot needs to recognize when they get a product so many people are complaining about the same thing and Husky needs to have a recall on this junky regulator
July 17, 2015
Rated 4.0 out of 5.0��by techeddan 3/8" RegulatorRrepair Kit
I had my Husky compressor for over 15 years and never had a problem. Nine months ago I developed a leak coming from the adjusting knob on the regulator. I purchased a repair kit for the regulator for $15.00 and an additional $4.00 charge for shipping. The repair was simple except there were no directions included with the repair kit. After two attempts I finally got it on the third try. Hint: When replacing the parts with the new make sure you have the screw plate inside the handle is adjusted all the way out leaving approximately two threads left. This will give you the ability to adjust your pressure. I can now adjust from 140lbs down to 10lbs of air pressure with no leaks.
April 16, 2014
Rated 4.0 out of 5.0��by glm1949 Neccesary purchase.
I found it difficult to mount the regulator on a wall firmly enough to hold it in place while I use my sprayer.
August 11, 2015