Model # H4210

Internet #203462127

Store SKU #761286

Husky 3 in. Cut-Off Tool
0722470278139

Husky

3 in. Cut-Off Tool

$44.98 /each

Frequently Bought Together

Product Overview

The new Husky air tool line in built to industrial standards for the professional user providing more power, less noise and longer life. This new Husky 3 in. Cut-Off Tool features low weight housing with rubberized handle overmold for comfort. Precision bearings reduce vibration and spindle run-out and internal silencing greatly reduces tool noise. The tool operates at 20,000 RPM. Designed for cutting sheet metal, plastics, composites, siding, auto mufflers, bolts, screws and rivets. The large motor design provides ultimate stall resistance.

California residents: see   Proposition 65 information

  • 20,000 RPM free speed
  • Precision bearings reduce vibration and spindle run-out
  • Rubberized handle overmold for comfort
  • Built-in silencing reduces noise level

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is the guard removable?

Asked by: Rob
By ANSI Standards the guard must be supplied and remain on all cut-off tools. The guard can be physically removed but is not recommended and as a manufacture we can't recommend this as it is in violation of ANSI standards.
Answered by: Airtool Professional
Date published: 2017-01-16

Can it cut old pipes from kitchen or house doing remolding

Asked by: J85
Absolutely. Great for pipes bolts, nails etc. will not cut wood.
Answered by: Airtool Professional
Date published: 2017-01-05

Will this item work as a die grinder?

Asked by: Pablo
No as it has the wrong arbor. We sell a die grinder part H4220
Answered by: Airtool Professional
Date published: 2016-10-21

Slows or stops

Cut-off tool often bogs down on even soft metal. Compressor at 90psi. Maybe because I have a short 1/4" hose and need a 3/8 or 1/2"? Also, the adjuster knob... instructions don't say which way to turn to increase/decrease air flow.
Asked by: MS
First and foremost you must use a 3/8" hose. The 1/4" hose is not capable of allowing enough SCFM (Volume) of air to the tool. Once you change the hose (3/8" by 25' or 50') before using the tool: Make sure you run the cut-off tool is running full open free speed by the compressor regulator gauge and set the regulator to 90 PSI with the tool running full speed. This will insure that you are getting the full 90 PSI required at the tool. once set, when you let off the trigger the gauge will jump higher but do not adjust as when you pull the trigger it will fall back to 90 PSI. If you are not able to get to 90 PSI based on the above scenario then you need a larger compressor that provides more SCFM per minute. once you achieve the above, I promise the tool will cut through steel like butter!!! Also please use plenty of "air Tool" oil in the air inlet to keep the tool well lubricated and avoid rusting of internal parts.
Answered by: Airtool Professional
Date published: 2016-07-14
  • y_2017, m_2, d_25, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_203462127, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms
  • QUESTIONS, PRODUCT

Customer Reviews

3 in. Cut-Off Tool is rated 4.4 out of 5 by 11.
Rated 5 out of 5 by from Fantastic tool!! Very nice sturdy well made cut off tool by Husky. The only assembly is to attach the blade! Great addition to my shop it replaces a manual hack saw in most cases. It is compact, very light weight at 1.8 pounds and easy to operate and makes cutting metal and metal rods easier and faster than I can cut with a manual hack saw. Can buy 3 inch disks for this tool, relatively cheap and they last longer than a hack saw blade. It is very fast, runs 20,000 rpm.
Date published: 2016-11-27
Rated 5 out of 5 by from Excellent construction and smooth operation. Out of the package and after adding your 1/4 NPT fitting of choice, this cut off wheel setup is ready to go. Included is a basic standard cut off wheel to get you started out of the package. Allen tool is also included for attachment. In operation, cut off tool is smooth with a good feathering paddle switch that allows controlled speed and cutting. Tool feels well in the hand with a slight soft plastic rubber type over mold construction.
Date published: 2016-12-02
Rated 5 out of 5 by from Easy to control This cut off tool is really easy to control. It's a well made unit that has very low vibration. It doesn't want to shake around in your hand and seems to bind far less on the work surface when cutting. I've used it to cut through some old 18 gauge steel doing body work and it's fantastically accurate. I've also cut slots into 1/2" steel bar stock and it did it perfectly and with absolutely no binding or walking. Great tool!
Date published: 2016-12-06
Rated 5 out of 5 by from Compact cutter for cramped spaces This cut off saw cuts steel very quickly for a hand held tool. No assembly is required except for attaching the blade with the wrenches included and adding an air hose fitting. It cuts quickly with very little vibration and it will fit in cramped spaces where I could not easily use a hacksaw. There is an ingenious safety interlock that makes it unlikely that you would start the tool unintentionally.
Date published: 2016-12-26
Rated 5 out of 5 by from Every do it yourselfer should have this cutoff tool we were doing some body work when I got this cut off tool, and we needed to cut out and shape 14 brackets. since the only assembly was to screw in the air fitting and mount the blade and put a couple of drops of air tool oil in, we were cutting out brackets in a matter of minutes. This tool is very easy to use and is a good weight for handling to make accurate cuts. It feels very strong and sturdy.
Date published: 2016-12-02
Rated 3 out of 5 by from Performance not what I expected air Compressor set up: 20 gal husky 175 psi "quiet" portable compressor with 3/8" 50 ft. hybrid husky air hose with 1/4" quick disconnect fittings and inline filter. Husky cut off tool was purchased to cut off a 2.5" ID steel exhaust piping. I read the reviews and they said it uses air very quickly. Other reviews stated the tool cut through steel like butter. I felt with these reviews and my current air compressor setup, I should have no issue with cutting a 2.5" exhaust tube. It took me roughly 30 minutes to cut through the exhaust tube.. air compressor had to refill twice. It may be my novice skills using a cut off tool as this is my first one but I did manage to get the hang of it towards the back half of the cutting. Because of the protective shield, it was very cumbersome attempting to cut through the upper part of the pipe which is almost flush with the frame of the car. I had to unbolt the pipe at the catalytic converter and pull down to make enough space to fit the tool in there to cut. By the time I was finished cutting, a good 30% of the cutting wheel was gone. If someone were to ask if Id recommend this tool to do exhaust work (on the vehicle), id probably recommend a sawzall for a cleaner and quicker cut.
Date published: 2016-08-08
Rated 4 out of 5 by from good buy nice tool.what you might offer is a eletric cuttoff tool. the advantage to this is obvious ...,no air compressor needed. like most air tool of this type 4cfm is needed. with eletric just a good power cord. still this one is still a good buy...
Date published: 2013-12-27
Rated 4 out of 5 by from Does the job Only used it a few times, but it cuts. It lacks power for the amount of air it uses. I have an 3hp 120gal Ingersoll and it would keep up but was on way too much for a little cut-off tool.
Date published: 2014-10-21
  • y_2017, m_2, d_25, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_, sid_203462127, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • REVIEWS, PRODUCT