$26.47
/each

The Husky 50 ft. 14/3 Extension Cord delivers medium-duty indoor and outdoor use. The kink-free cord features a 1,875-Watt capacity. It is insulated for 300-Volt for reliable use.

California residents: see Proposition 65 information

- Use to extend the reach of power tools and other electronics
- 50 ft. 14/3 extension cord allows for indoor and outdoor use
- 1 outlet
- UL listed
- 15 Amp, 125-Volt and 1,875-Watt capacity
- Note: Product may vary by store
- Click to learn more about the factors you must consider when choosing extension cords
- Click here for more information on Electronic Recycling Programs

Cord Thickness (In.) |
0.03 |
Product Depth (in.) |
2 |

Product Height (in.) |
12 |
Product Width (in.) |
5 |

Wire Gauge |
14 |

Application |
Medium Duty |
Cord Length (ft.) |
50 |

Electrical Product Type |
Electrical Cords & Cord Management |
Indoor/Outdoor |
Indoor/Outdoor |

Maximum Amperage (amps) |
15 |
Number of Conductors |
3 |

Number of Outlets |
1 |
Product Weight (oz.) |
76.03 oz |

Returnable |
90-Day |
Voltage (volts) |
125 |

Certifications and Listings |
1-UL Listed |
Manufacturer Warranty |
None |

10 Questions21 Answers

50 ft. 14/3 Extension Cord

This question is from 100 ft. 14/3 Extension Cord

1 answer

July 3, 2016

Answer:

Yes, the extension cord can be used to power a pool filter.

This question is from 100 ft. 14/3 Extension Cord

2 answers

August 6, 2016

Answer:

Depends on how many amps you need to run your saw.

June 23, 2016

Answer:

The orange extension cord is 16 AWG rated to carry 10 amps. It is light duty wire. In general the worst that will happen if you try to push to many amps through it is that it will over heat and potentially melt. That would/should short the circuit throwing your circuit breaker. With luck it won't fail and turn you into a crispy critter.

The amperage draw of you chain saw is more important than the
Read More

The orange extension cord is 16 AWG rated to carry 10 amps. It is light duty wire. In general the worst that will happen if you try to push to many amps through it is that it will over heat and potentially melt. That would/should short the circuit throwing your circuit breaker. With luck it won't fail and turn you into a crispy critter.

The amperage draw of you chain saw is more important than the voltage. The length of the distance between the electricity start point and end usage point - AKA saw - makes a difference also. The further you are from the electric outlet the lower the gage wire you will need. Once you know how long an extension cord you need and the amps draw of the saw you can check NEC (National Electric Code) charts to determine the size of wire to use. Your HD rep should be able to tell you what wire you need, if you have the specs. of your intended usage.

My son used a HD 16? inch chain saw, drawing just under 15 amps, with 16 gage wire and had no problems cutting up a large tree which had fallen in my back yard. The wire was 100 feet long. It did get warm, but did not fail or throw 15 amp circuit breakers. An appropriate wire would have been 14 awg, which is 15 amp rated for short distances.
Read Less

This question is from 100 ft. 14/3 Extension Cord

3 answers

August 6, 2016

Answer:

It means 14 gauge wire with 3 conducting wires inside the cord. Because my mower is 13 amp and I knew I would need 100' of cord to cover my yard, I chose the 14 gauge medium duty cord.

May 10, 2016

Answer:

Yes, this is a 14 gauge cord. The number 14 is the gauge (size) of the wires. The number 3 is the number of wires in the cable (cord) (One hot (black), one neutral (white) and one ground (green)).

April 25, 2016

Answer:

14 is the individual wire gage. Three is the number of wires in the cable. If you are making a long run such as 100 feet, using something that uses 15 amps- circular saw, etc. 14 gage will over heat. get 12 gage. The longer you run an extension cord or any wire the smaller the gage you will need to carry the current safely.

This question is from 100 ft. 14/3 Extension Cord

2 answers

August 6, 2016

Answer:

Approximate voltage drop for various extension cord gauges, lengths, and amps

(% drop from 120V in parentheses)

Cord Current flowing through cord

Length,

feet 10A 15A 20A 30A

Cord Size = #16 gauge wire

10 1.0 V (0.8%)

20 2.0 V (1.7%)

30 2.9 V (2.4%)

40 3.9 V (3.3%)

50 4.9 V (4.1%)

100 9.8 V (8.2%)

Cord Size = #14 gauge wire

10 0.6 V (0.5%) 0.9 V (0.8%)

20 1.2 V (1.0%) 1.8 V (1.5%) Read More

(% drop from 120V in parentheses)

Cord Current flowing through cord

Length,

feet 10A 15A 20A 30A

Cord Size = #16 gauge wire

10 1.0 V (0.8%)

20 2.0 V (1.7%)

30 2.9 V (2.4%)

40 3.9 V (3.3%)

50 4.9 V (4.1%)

100 9.8 V (8.2%)

Cord Size = #14 gauge wire

10 0.6 V (0.5%) 0.9 V (0.8%)

20 1.2 V (1.0%) 1.8 V (1.5%) Read More

Approximate voltage drop for various extension cord gauges, lengths, and amps

(% drop from 120V in parentheses)

Cord Current flowing through cord

Length,

feet 10A 15A 20A 30A

Cord Size = #16 gauge wire

10 1.0 V (0.8%)

20 2.0 V (1.7%)

30 2.9 V (2.4%)

40 3.9 V (3.3%)

50 4.9 V (4.1%)

100 9.8 V (8.2%)

Cord Size = #14 gauge wire

10 0.6 V (0.5%) 0.9 V (0.8%)

20 1.2 V (1.0%) 1.8 V (1.5%)

30 1.8 V (1.5%) 2.7 V (2.3%)

40 2.4 V (2.0%) 3.6 V (3.0%)

50 3.0 V (2.5%) 4.6 V (3.8%)

100 6.1 V (5.1%) 9.1 V (7.6%)

Cord Size = #12 gauge wire

10 0.4 V (0.3%) 0.6 V (0.5%) 0.8 V (1.7%)

20 0.8 V (0.7%) 1.1 V (0.9%) 1.5 V (1.3%)

30 1.1 V (0.9%) 1.7 V (1.4%) 2.3 V (1.9%)

40 1.5 V (1.3%) 2.3 V (1.9%) 3.1 V (2.6%)

50 1.9 V (1.6%) 2.9 V (2.4%) 3.8 V (3.2%)

100 3.8 V (3.2%) 5.7 V (4.8%) 7.7 V (6.4%)

Cord Size = #10 gauge wire

10 0.2 V (0.2%) 0.4 V (0.3%) 0.5 V (0.4%) 0.7 V (0.6%)

20 0.5 V (0.4%) 0.7 V (0.6%) 1.0 V (0.8%) 1.4 V (1.2%)

30 0.7 V (0.6%) 1.1 V (0.9%) 1.4 V (1.2%) 2.2 V (1.8%)

40 1.0 V (0.8%) 1.4 V (1.2%) 1.9 V (1.6%) 2.9 V (2.4%)

50 1.2 V (1.0%) 1.8 V (1.5%) 2.4 V (2.0%) 3.6 V (3.0%)

100 2.4 V (2.0%) 3.6 V (3.0%) 4.8 V (4.0%) 7.2 V (6.0%)

Note 1 Numbers are rounded to the nearest 0.1V and 0.1%.

Note 2 Voltage drops shown are the same for any single-phase supply voltage. Voltage drop depends only on amps.

Note 3 Values are approximate, as they are affected by factors such as temperature.

Note 4 For a given cord size and amps, voltage drop is uniform over a length of cord, so for example, a 40 ft cord has

twice the voltage drop as a 20 ft cord. That means the numbers in the voltage drop columns can be added

together. For example, the voltage drop for a 70 ft cord can be found by adding together the voltage drops for a

30 ft cord and a 40 ft cord. © Read Less

(% drop from 120V in parentheses)

Cord Current flowing through cord

Length,

feet 10A 15A 20A 30A

Cord Size = #16 gauge wire

10 1.0 V (0.8%)

20 2.0 V (1.7%)

30 2.9 V (2.4%)

40 3.9 V (3.3%)

50 4.9 V (4.1%)

100 9.8 V (8.2%)

Cord Size = #14 gauge wire

10 0.6 V (0.5%) 0.9 V (0.8%)

20 1.2 V (1.0%) 1.8 V (1.5%)

30 1.8 V (1.5%) 2.7 V (2.3%)

40 2.4 V (2.0%) 3.6 V (3.0%)

50 3.0 V (2.5%) 4.6 V (3.8%)

100 6.1 V (5.1%) 9.1 V (7.6%)

Cord Size = #12 gauge wire

10 0.4 V (0.3%) 0.6 V (0.5%) 0.8 V (1.7%)

20 0.8 V (0.7%) 1.1 V (0.9%) 1.5 V (1.3%)

30 1.1 V (0.9%) 1.7 V (1.4%) 2.3 V (1.9%)

40 1.5 V (1.3%) 2.3 V (1.9%) 3.1 V (2.6%)

50 1.9 V (1.6%) 2.9 V (2.4%) 3.8 V (3.2%)

100 3.8 V (3.2%) 5.7 V (4.8%) 7.7 V (6.4%)

Cord Size = #10 gauge wire

10 0.2 V (0.2%) 0.4 V (0.3%) 0.5 V (0.4%) 0.7 V (0.6%)

20 0.5 V (0.4%) 0.7 V (0.6%) 1.0 V (0.8%) 1.4 V (1.2%)

30 0.7 V (0.6%) 1.1 V (0.9%) 1.4 V (1.2%) 2.2 V (1.8%)

40 1.0 V (0.8%) 1.4 V (1.2%) 1.9 V (1.6%) 2.9 V (2.4%)

50 1.2 V (1.0%) 1.8 V (1.5%) 2.4 V (2.0%) 3.6 V (3.0%)

100 2.4 V (2.0%) 3.6 V (3.0%) 4.8 V (4.0%) 7.2 V (6.0%)

Note 1 Numbers are rounded to the nearest 0.1V and 0.1%.

Note 2 Voltage drops shown are the same for any single-phase supply voltage. Voltage drop depends only on amps.

Note 3 Values are approximate, as they are affected by factors such as temperature.

Note 4 For a given cord size and amps, voltage drop is uniform over a length of cord, so for example, a 40 ft cord has

twice the voltage drop as a 20 ft cord. That means the numbers in the voltage drop columns can be added

together. For example, the voltage drop for a 70 ft cord can be found by adding together the voltage drops for a

30 ft cord and a 40 ft cord. © Read Less

April 25, 2016

Answer:

You can but it better be a very low gage cord 4 gage will work and give you 12 amps.at 120 volts. .

Rated 4.7 out of 5 by 59
reviewers.

Rated 5.0 out of 5.0 by Scout Very good cord
Very well made extension cord , surpassed my expection.
August 9, 2016

Rated 4.0 out of 5.0 by Yardly It works
Works as intended. Red color contrasts well against grass. I use it with the Sun Joe electric mower.
May 10, 2016

Rated 4.0 out of 5.0 by cornfedhillbilly Extension Cord
Good extension cord to power all of my tools. Only complaint is the way they are packed. They seam to be a little hard to work with because they are formed from being shrink wrapped for I don't know how long. Hopefully as time goes on it will lay better. Not a deal breaker though can work with it.
November 21, 2015

Rated 2.0 out of 5.0 by arnold3920 Cord becoming twisted over time
As time goes by the cord looks more and more like a corkscrew when it is laid out straight. It doesn't lay flat any more. It has It has become difficult to coil up after use and twists into knots very easily.
October 23, 2015

Rated 5.0 out of 5.0 by 1964houghtonlakegrad Purchased to use with electric lawn mower.
Very sturdy electrical cord. It is perfect for use with electric mower and does not tangle up. The length is just right for mowing my half acre of yard.
July 19, 2016

Rated 5.0 out of 5.0 by John Good extension cord for the price
Yup it's a 100 foot extension cord.
The quality is good. Heavier gauge for higher amperage electric tools and lawn mowers.
I bought it specifically for an electric lawn mower. I will use it for power tools as well.
Flexible enough for ease of use and coiling or braiding for storage.
July 6, 2016

Rated 5.0 out of 5.0 by Deb electric law mower
the black and decker lawn mower i purchased is very easy to handle and does am excellent job of cutting and mulching the grass. i am very happy with it.
May 3, 2016

Rated 5.0 out of 5.0 by Mare Great Extension Cord
Cord is red and black, easy to see in the grass so that you won't run over it with the lawn mower or cut it with the weed whacker.
April 26, 2016