Husky 60 gal. Stationary Electric Air Compressor-C602H at The Home Depot
Free shipping
Discontinued

Husky

Model # C602H

Internet # 203187350

Store SKU # 911625

60 gal. Stationary Electric Air Compressor


Husky 60 gal. Stationary Electric Air Compressor
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$489.00 / each
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI
Loading...

PRODUCT OVERVIEW

Model # C602H

Internet # 203187350

Store SKU # 911625

Husky 60-gal. single stage stationary electric air compressor features a cast iron, oil lubricated pump. For maximum performance and efficiency the Husky 60-gal. runs on a heavy duty induction motor. 155 psi max pressure allows the user optimum tool performance.

  • CFM at 40 psi is 13.4 and CFM at 90 psi is 11.5
  • Large capacity, 60-gal. ASME air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc.
  • Equipped with pressure gauge and on/off switch
  • Supported by our toll free help line 888-895-4549
  • Shipped with synthetic oil for optimum performance and long life

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Air Delivery SCFM @ 40PSI  13.4  Air Delivery SCFM @ 90PSI  11.5 
Amperage (amps)  15  Assembled Depth (in.)  31 in 
Assembled Height (in.)  70 in  Assembled Width (in.)  27 in 
Certifications and Listings  4-UL Certified,CSA Listed  Compressor Tank Capacity (Gallons)  60 
Compressor Type  Workshop and Industrial  Compressor/Air Tool Features  Tank Pressure Gauge 
Decibel Rating (Outdoor)  84 dBA  Horsepower (hp)  3.7 
Included  No additional components or accessories are included  Manufacturer Warranty  2 year 
Maximum pressure (psi)  155  Portable  No 
Product Weight (lb.)  208 lb  Pump Type  2 Cylinder, Oil Lubricated 
Reconditioned  No  Returnable  90-Day 
Stage Count  Single Stage  Tank Material  Steel 
Voltage (volts)  230 

CUSTOMER REVIEWS

Rated 4 out of 5 by 41 reviewers.
Rated 4 out of 5 by Good Compressor I bought this compressor for use at my barn. As other reviews have indicated, it's a good idea to check the oil level for the pump prior to the breakin run, mine was over filled also. One other review suggested changing out the drain plug for the tank. This IS a great idea & makes draining the tank after use a cat's meow! I bought all the 1/4" brass fittings to do this at Home Depot. I used one 1/4" elbow male to female to replace the plug, two 1/4" brass pipes 4" long ea. with a coupling & added a 1/4" ball valve on the end with another elbow to direct the discharging air toward the floor. It works absolutely great and very much easier than trying to twist the small drain knob with your fingers up under the compressor... July 1, 2013
Rated 5 out of 5 by It's a great compressor I had none of the leak problems , the size of the tank makes it run a lot less, I have a dedicated line for it so no problems starting, I did find that it was over filled with oil like the other reviews ,it was loud ,I purchased a silencer/filter by Solberg from Graingers # 4z679, to make it fit, I used the existing filter as a template, I cut a piece of diamond plate aluminum ( also from home depot ) ,drilled a hole the size for the new filter , installed it , it is at least half as loud if not more . June 14, 2013
Rated 5 out of 5 by Great compressor for the price Had been looking a good upgrade from my current compressor (2HP, 15 Gallon, Oil-less) that I have had for about 14 years. It was still working strong but only produces about 5.7 cfm @ 90psi and I am starting to use some more air equipment and wanted something a little better. I had been looking at a 60 Gallon 5HP unit at HF that was about $300 more than this unit. I didn't quite need that much CFM and wasn't sure I wanted to run a 5HP motor. So, this Husky unit fit my budget and usage better. This unit seem to be put together pretty well. @ just over 200 pounds it wasn't hard for me and a buddy to haul home in my pickup. Installation took me and a buddy several hours and went pretty much as expected. I took my time and planned it out. Know that this is not just a small unit you sit anywhere and plug into a 115V outlet. I have seen some reviewers complaining about the wiring being complicated. Quite frankly, I didn't see it as hard at all. If you're having trouble wiring up a simple 230V single phase device, it is not something you should be tackling yourself, have a professional do it right if you're not sure. Some other reviewers also have commented on the instructions not being good or not provided. My unit was on display at the store and had a packet attached to the tank with the instructions and 4 rubber/metal washers enclosed. I found them to be fine. I decided to let the unit run for the break-in period of 20 minutes while we were still running some of the air lines. Even though the instructions didn't mention changing the oil after the break-in, for $8 I did it anyway and was glad, because there was some very small metal flakes in the oil as expected. I actually flushed the oil a second until I got totally clear oil. The unit takes 16oz of oil. One of the things I listed as a con, was the fact there are some things you will need that are not included like a regulator. This was not that big of a deal, and for some, it may be better because you can get exactly what you want. I was able to get most everything right there at Home Depot. I think all the extras may have cost me another $35-$50. I'm still getting all my air lines setup, so I can't leave a complete review. But, so far I'm pretty impressed with the unit and will have some more to add after a few months of use. September 9, 2013
Rated 4 out of 5 by It's quiet and has plenty of power I have had this compressor for a few months now and haven't had any problems so far. I changed the oil after 40 minutes of use. It's quiet and fills up quick. April 15, 2014
Rated 5 out of 5 by Runs very smoothly .... no problems I set this up yesterday on a pressure treated skid I made in lieu of bolting to my concrete floor. 4-30" 2x4's spread out and 2-32" 2x6's crisscrossed on top { made sure the feet sat overtop of where the 2x6's crossed over the 2x4's and lagged thru both }and then strips of 1/2" stall mats screwed underneath the 2x4 skids to keep from moving due to any vibration. Did also swap out the bottom drain to a horizontal 1/4" pipe with fittings for ease of reaching the valve. Couldn't be happier so far, as it is very quiet and did not vibrate whatsoever. July 18, 2013
2 3 4 5 >>

SHIPPING AND DELIVERY OPTIONS

Curbside Truck Shipping (By Appointment) includes delivery to receiving area/dock for businesses or curbside for residential orders. The carrier will contact you to make a delivery appointment with a 4 hour window once the items have arrived at the local hub in your area. Delivery appointments are required.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.