Husky Pneumatic 16-Gauge Straight Finish Nailer-DPFN64 at The Home Depot
Free shipping


Model # DPFN64

Internet # 203656887

Pneumatic 16-Gauge Straight Finish Nailer

Husky Pneumatic 16-Gauge Straight Finish Nailer

This item has been discontinued.
The Home Depot no longer carries this specific product.

$89.00 / each
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


In Stock



Model # DPFN64

Internet # 203656887

This Husky 16-Gauge Strip Straight Finish Nailer is excellent for fastening 3/4 - 2-1/2 in. nails in moldings, chair rails, door casings, cabinetry and furniture construction. The convenient design allows you easily change the depth drive and adjust the 360-degree air exhaust without needing any tools. A no-mar tip leaves only a small trace on the work surface to save you time during finishing applications.

  • Tool-free depth adjustment
  • 70-110 psi operating pressure
  • No-mar tip protects work surface to reduce finishing time
  • 360-degree tool-free adjustable exhaust
  • Lightweight, die-cast aluminum construction
  • Anti-dust cap and internal air filter for clean operation
  • Selectable fire trigger
  • Quick release nose to remove nail jams
  • 2 year limited warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Air Tool Type  Air Nailer  Assembled Depth (in.)  3.5 in 
Assembled Height (in.)  14.5 in  Assembled Width (in.)  12.5 in 
Compressor/Air Tool Features  Adjustable Exhaust Port,Fastener Depth Control  Cordless/Corded  Cordless 
Energy Type  Air  Included  No additional components or accessories are included 
Loading type  Strip  Maximum Fastener Size  3/4 in 
Maximum fastener size (in.)  .75  Minimum Fastener Size  2-1/2 in 
Minimum fastener size (in.)  2.5  Nail Gauge  16 
Nailgun Angle  Reconditioned  No 
Returnable  90-Day 


Rated 4.7 out of 5 by 7 reviewers.
Rated 5 out of 5 by Great gun I bought this gun on sale about a year ago as a back-up for my bostitch 16 gauge. I was very surprised when i used this gun trim a house. It never jammed one time with any nail size i tried even a bunch of senco 1" finish nails. It fires quietly compared to bostitch and it had power in reserve even when nailing Brazilian walnut with 2 1/2 " nails which it recessed all nails just below the surface perfectly to be filled. The only feature on this gun that I am a little disappointed with is the depth adjustment, its a little difficult to turn but other than that I am very happy.I use mainly hitachi finish guns and man it is just as smooth but at a much lower cost. Dont be afraid you will be happy as I am and use it just about everyday...... August 17, 2014
Rated 5 out of 5 by Best universal 16 Gauge nailer I Have put door up casing and set my hardwood floor. worked great October 8, 2014
Rated 5 out of 5 by Easy to use, start with lower pressure We used this gun to put up the trim around our home. We used the basic 4" trim from Home Depot, and this gun did a great job. The instructions on the gun say to use it between 70-110, I found that for this thinner trim 60 was actually perfect, as 70 made too big of a divit to fill. The gun comes with the short style hose attachment, we use the long style so had to get a converter but that wasn't a big deal. Love the rapid fire option (turned on by a little red lever on the side), you just have to be aware of where the tip is so you don't accidentally fire a nail somewhere unwanted. Overall has worked great so far, we had used a 15 ga gun before, so we had to get new nails for this 16 ga gun, so definitely check that any nail strips you have are the correct gauge before you throw them in. July 25, 2013
Rated 5 out of 5 by Light weight and easy to use. This Finish nailer makes quick work of tasks without a lot of effort. The nailer will save you a lot of time and energy. Very little trace evidence is left behind as well. None of the hammer indents if you miss or drive the nail in too deep. The nailer is very light weight and easy to use. September 26, 2013
Rated 4 out of 5 by Nice finish nailer Up until I got this nailer, I'd always used an 18-ga brad nailer for trim, and I figured I'd try this 16-ga nailer for installing window jamb extensions and door jambs. One of the nicest features about this nailer is the pad and shape of the nose. The nailer didn't leave a single mark on my jambs, and the curve of the nose made it easy to slightly adjust the angle of the nail. Another great feature is the way the nose flips out of the way to easily clear jams; however, I've used the gun for about a dozen window jambs and haven't had a single jam yet (I did oil it before first use). Adding/removing nails is easy but you do have to actually grab the nails - they don't slide easily in the magazine - so if you need to remove them (which I do, just for safety) it's hard to grab them if you only have a few left in the magazine. On my nailer, the depth adjuster was really locked in place out of the box, so I had to work really hard with a plier to get the depth adjuster to move. Once I did, adjustment was easy. I used the nailer on the deepest possible setting, and I still sometimes had to use a nailset to "hide" the top of the fasteners. The nailer does ok in corners; I found that turning it upside down made it more effective at reaching into corners (so the nose rests on the curved part). I thought I would find this nailer too heavy compared to my 18-ga, but it wasn't. October 15, 2013
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.