0037064100537

Husky

Model SM5HD

Internet #202284233

Store SKU #703594

Metal 5-Gal. Spiral Mixer

$6.27 /each

Frequently Bought Together

Product Overview

The Metal 5-Gallon Spiral Mixer is designed to take the work out of mixing and help you achieve smooth, consistent application. This handy tool eliminates uneven mixing and searching for odds and ends with which to stir 5-gallon paint buckets.

  • Stirs 5-gallon buckets
  • Made of metal
  • Spiral design helps mix the paint to a smooth, even consistency
  • Saves time and effort
  • 3/8in hex. shaft

Specifications

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions2 Answers

Customer Questions & Answers

Metal 5-Gal. Spiral Mixer
Metal 5-Gal. Spiral Mixer

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Metal 5-Gal. Spiral Mixer
 
1 answer

what size

This question is from Metal 5-Gal. Spiral Mixer
Asked by
Read all my Q&A
October 30, 2015
what is the diameter of the mixer? also what is its overall length?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Sebring
Read all my Q&A
July 23, 2016
Answer: 
About 3-4 " for tip, lengthy enough to reach bottom of 5 gallon bucket of paint with no difficulty.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Metal 5-Gal. Spiral Mixer
 
1 answer

how to use

This question is from Metal 5-Gal. Spiral Mixer
Asked by
reno, nv
Read all my Q&A
September 12, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Sebring
Read all my Q&A
July 23, 2016
Answer: 
Attach to drill and turn on. It does a good job.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-09-08 T11:39:42.238-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202284233, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 2.8 out of 5 by 13 reviewers.
Rated 1.0 out of 5.0 by poor design Won't fit in 3/8" drill--returning. What where they thinking? September 3, 2016
Rated 5.0 out of 5.0 by Greeeeaaaaaaattttttt. Nice price for a nice tool. Cheaper than most, but well made. Did a very good job of mixing. Not to hard to clean up. Fit my cheap battery powered drill with no problem. Definitely would recommend and purchase again. July 23, 2016
Rated 5.0 out of 5.0 by Worked for me I used this stirrer for sand mix driveway sealer in 5 gallon pails. It and it worked well with no issues. I used it with a DeWalt 1/2" 14V cordless drill and it had no problem mixing the sealer. July 3, 2016
Rated 1.0 out of 5.0 by Don't buy a 3/8 in. mixer because it's NOT 3/8 in.!!!!! Can't believe I even have to waste my time writing this...you would think companies took specific measurements of their products so that they are accurate. The 3/8 mixer is welded with great quality, especially for the price. I purchased a 3/8 clutch drill along with it as I need to mix large amounts of paint and clay. The mixer bit diameter is only about 1/2-1 mm off from 3/8 in., but because of this, it doesn't even fit into the drill head. I even filed down the end so it would fit easier, no luck. No customer should have to modify a tool, especially when it says the specs. right on this website. Very displeased, and both will be refunded tomorrow. January 10, 2014
Rated 1.0 out of 5.0 by Doesn't fit 3/8 chuck I agree completely with everyone else - this DOES NOT fit a 3/8 drill - I have 2 drills and it doesn't fit either - returning it today. If you are need of one of these I suggest you take it over to the tool section and see if it fits their 3/8 drills before you buy it. It's a pain having to go back and return this type of item April 8, 2015
Rated 1.0 out of 5.0 by Returning mine to the store - won't fit in my drill chuck I tried it in both of my ⅜" chuck drills. It won't fit. April 29, 2014
Rated 5.0 out of 5.0 by great mixer Even though the other reviwes are negative I have nothing bad to say about this mixer. I have two and most recently used one to mix 70 bags of type S mortar with zero problems. In fact I like it better than other traditional paddles that are cheap and brittle (this one is steel) and it doesn't shave pieces of the bucket into the mix either. May 11, 2012
Rated 1.0 out of 5.0 by Pay more for better product. You get what you pay for. The spot welds that connect the fins to the shaft are insufficient to say the least. The one I bought didn't even survive the trip home without breaking loose. I didn't bother taking it back to the store for another one just as poorly made. If you feel like welding it back up like I did, it'll work fine. May 1, 2012
  • 2016-09-08 T11:56:37.808-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_13, tr_13
  • loc_en_US, sid_202284233, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • REVIEWS, PRODUCT