0722470273127

Husky

Model H4920SSG

Internet #203496854

Store SKU #762003

Siphon Feed General Purpose Spray Gun

$39.98 /each
  • Stainless steel needles for ultimate reliability
  • Precision spray cap for perfect pattern
  • Smooth/comfortable trigger pull

Frequently Bought Together

Product Overview

Husky spray guns feature stainless steel needles and precision air caps for reliability and perfect paint atomization. All Husky Spray Guns have the controls located at the rear of the gun to allow comfortable use by left and right hand operators. This Husky spray gun features a 1000cc paint cup and is suitable for use with different coating materials and paint. The gun is easy to clean and comes complete with a cleaning brush set and multi wrench. This gun is the good for use with thicker paints such as latex.

California residents: see   Proposition 65 information

  • 1000 cc cup
  • Stainless steel needles for ultimate reliability
  • Precision spray cap for perfect pattern
  • Smooth/comfortable trigger pull

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

11 Questions14 Answers

Customer Questions & Answers

Siphon Feed General Purpose Spray Gun
Siphon Feed General Purpose Spray Gun

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

can I change the tips to accomodate different thickness(viscosity) of paint?

This question is from Siphon Feed General Purpose Spray Gun
Asked by
phoenix, az
Read all my Q&A
February 19, 2015
Thank you,
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
April 22, 2015
Answer: 
I am not sure but the whole nozzle and pressure are adjustable.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

March 3, 2015
Answer: 
We only offer one tip for this gun which is the 1.8 mm tip. his is a relatively large nozzle size and can accommodate almost any paint. However, thicker latex paints especially, will need to be thinned with accordance to the paint manufactures specifications. This is common practice for all air operated paint guns.
+1point
3out of 5found this answer helpful.
Was this helpful?helpful3unhelpful2

February 20, 2015
Answer: 
The product takes tip sizes of either 1.88mm or 2.2mm.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
2 answers

Does this gun build up to 50 psi?

This question is from Siphon Feed General Purpose Spray Gun
Asked by
Read all my Q&A
June 4, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 6, 2016
Answer: 
Not sure what you're asking... This is a Pneumatic spray gun which means the gun operates on air. The air pressure from the compressor going into the gun needs to be between 40 and 45 PSI for gun to operate properly. Maximum air pressure rating is 45 PSI.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 5, 2016
Answer: 
The recommended operating pressure is 45 psi.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Do the Suction Tube and the Paint Canister Lid unscrew.

This question is from Siphon Feed General Purpose Spray Gun
Asked by
Nevada
Read all my Q&A
July 25, 2016
There is some paint build up in the top of the Paint Canister Lid, if I could remove it and the Suction Tube it would make it possible to clean the Spray Gun completely.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 27, 2016
Answer: 
No on the H4920 general purpose gun the lid and suction tube is built into the handle and can,t be removed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Where is the Air Vent

This question is from Siphon Feed General Purpose Spray Gun
Asked by
Nevada
Read all my Q&A
July 25, 2016
The paint is splattering and I cannot find the Air Vent which is one of the recommendation for solving this problem
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 27, 2016
Answer: 
In the H4920 General purpose gun the air hole is in the top of the cap where the threads are. You can unscrew the cap from the paint gun head and you will be able to see the hole when you look done from above. The splattering issue is more likely from the paint being to thick and needing to be thinned out. Also make sure that you have at least a 20 gallon compressor that will provide a continuous 40 PSI Read More
In the H4920 General purpose gun the air hole is in the top of the cap where the threads are. You can unscrew the cap from the paint gun head and you will be able to see the hole when you look done from above. The splattering issue is more likely from the paint being to thick and needing to be thinned out. Also make sure that you have at least a 20 gallon compressor that will provide a continuous 40 PSI to the gun. If you are running a 25 or 50 ft. 3/8 diameter hose (Which is recommended) you will need to set your compressor regulator at 50 PSI to get 40 at the tool. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-22 T17:27:22.366-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203496854, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.3 out of 5 by 24 reviewers.
Rated 2.0 out of 5.0 by Good to start I got this along with its big brother and the same thing. They clog after about an hour then after a cleaning it starts to work and clogs again. Fresh paint shaken and straight from store. I would steer clear. Didn't even finish project a shed I was able to get 2 sides of a 8x10 before it clogged. June 12, 2016
Rated 2.0 out of 5.0 by Hard to Use Despite frequent cleaning and following directions to the letter, product kept plugging up and failing to spray paint. I spent more time trying to get it to work than on the actual job. I ended up finishing the job with a brush by hand. Also, this product is extremely hard to clean, and there are a number of parts or areas on it that absolutely cannot be accessed for cleaning. July 6, 2016
Rated 1.0 out of 5.0 by very frustrating... I have many years experience with spray guns including airbrushes so I know how these things work. This gun sucks. I could never get a clean spray, the paint comes out in a heavy textured spray that splatters everywhere. I played with this thing many times and gave it many chances with various paints, It just does not work. April 25, 2016
Rated 5.0 out of 5.0 by Great Product This air gun has changed very little since I first used one forty years ago and it is a solid product that gets the job done. May 17, 2016
Rated 2.0 out of 5.0 by I'd pass on this one unless you want texture Was in need of a spray guy to finish a project and decided on this one at the local store. I've had two guns before, each with their own quirks so I'm no stranger to them...so when this one had a good range and spray come out, I was very happy... However that changed within the first 5 minutes. After that, the gun started spitting. I took all the troubleshooting steps necessary and nothing changed. I've noticed a few other reviewers had the same problem. I'm returning it today. Another thing I noticed is that every low review for this gun has at least one thumbs down....kind of odd there. December 22, 2015
Rated 4.0 out of 5.0 by Got the job done the sprayer was easy to use but needed to be almost full to get an even coat. For the money it got the job done and was a good value. December 8, 2015
Rated 5.0 out of 5.0 by Good Deal and Great function for the money. This is one of the harder to find affordable guns that can actually shoot latex and acrylic enamel without having to resort to one of those overpriced and poor Wagner spray guns. Not for big jobs, whole house, but great for trim work because of cup size. This is a stellar performer IF you follow the directions. I just shot a gallon of paint on exterior trim with absolutely no trouble at all. It is a splendid value and. Dependable. I'd highly recommend it over Wagner for those thicker paint jobs. I have other spray guns I use with lacquer for those really fine jobs. Haven't tried this gun on finer work but it sure works great on thicker paints where my expensive finish guns can't handle. Paint a fence, house trim, a lawn chair and it'll be just fine. Can't beat the price - less expensive than those poorly built Wagners.. September 30, 2015
Rated 4.0 out of 5.0 by Easy to use Bought this to spray a 4 board fence. Works great with Behr fence stain. Did not take long at all before I had it adjusted to my liking. Only thing that would make it better is to have a little larger paint can on it. August 24, 2015
  • 2016-09-23 T02:27:13.071-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_24, tr_24
  • loc_en_US, sid_203496854, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms
  • REVIEWS, PRODUCT