Model # H4930SSG

Internet #203496910

Store SKU #762034

Husky Siphon Feed Spray Gun
0722470273134

Husky

Siphon Feed Spray Gun

  • Stainless steel needles for ultimate reliability
  • Precision spray cap for perfect pattern
  • Smooth/comfortable trigger pull
$49.98 /each

Frequently Bought Together

Product Overview

Husky spray guns feature stainless steel needles and precision air caps for reliability and perfect paint atomization. All Husky Spray Guns have the controls located at the rear of the gun to allow comfortable use by left and right hand operators. This Husky pro level spray gun features a 1000cc paint cup and is ideal for final fine coatings for car refurbishing, industrial, wall painting and woodwork. The gun is easy to clean and comes complete with a cleaning brush set and multi wrench.

California residents: see   Proposition 65 information

  • 1000 cc cup
  • Stainless steel needles for ultimate reliability
  • Precision spray cap for perfect pattern
  • Smooth/comfortable trigger pull

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

17 Questions21 Answers

Customer Questions & Answers

Siphon Feed Spray Gun
Siphon Feed Spray Gun

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Siphon Feed Spray Gun
 
2 answers

Lacquer sprayer

This question is from Siphon Feed Spray Gun
Asked by
mckinney tx
Read all my Q&A
August 24, 2016
Can this gun be used for lacquer sprayer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 24, 2016
Answer: 
Yes the H4930SSG will work but the Gravity feed guns are preferred. Models: H4840GHVSG and 4850GHVSG.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 24, 2016
Answer: 
This should not be used for lacquer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Siphon Feed Spray Gun
 
2 answers

Can this gun be used with water-based spray adhesives?

This question is from Siphon Feed Spray Gun
Asked by
Read all my Q&A
May 31, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Central ohio
Read all my Q&A
Home Improvement Profile: Professional
July 15, 2016
Answer: 
Yes, these types of spray guns are perfect to spray glue. I do upholstery and have used these for years. If your buying the right glue, no need to thin. Most will spray as they are. I buy mine in 5 gal containers.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 2, 2016
Answer: 
Yes but product must be thinned/cut to the manufactures specifications. Pancake syrup consistency to be able to spray properly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Siphon Feed Spray Gun
 
2 answers

Is this product an HVLP sprayer?

This question is from Siphon Feed Spray Gun
Asked by
Twentynine Palms CA
Read all my Q&A
December 10, 2015
Does this product meet the requirements of an High Velocity Low Pressure (HVLP) spray gun as required in CA businesses?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

January 22, 2016
Answer: 
This is a Pneumatic sprayer.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

January 19, 2016
Answer: 
No. Only the two Gravity feed spray guns are HVLP.
Models: 762051 and 762096.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Siphon Feed Spray Gun
 
2 answers

Will I need to purchase an air compressor to use a syphon feed spray gun?

This question is from Siphon Feed Spray Gun
Asked by
Virginia
Read all my Q&A
September 7, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Central ohio
Read all my Q&A
Home Improvement Profile: Professional
July 15, 2016
Answer: 
Yes. They all use air pressure to spray. And depending on what you are spraying, you will need a good compressor too. Little ones will not keep up. Some pan cake models will, best best with at least a 5 gal tank or bigger.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 10, 2015
Answer: 
Yes, ths product is powered by an air compressor.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-10-31 T16:23:34.536-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203496910, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Siphon Feed Spray Gun is rated 4.0 out of 5 by 28.
Rated 5 out of 5 by from Good Light Duty Gun RE: Husky Siphon Feed Spray Gun A good light duty gun for the DIY'er or Pro. I'm not a professional painter, but I do need to spray paint or stain from time to time, and this is a good gun for the light duty projects. I like the controls on the rear of the gun, I tend to switch from hand to hand while spraying. It has a 1,000cc capacity cup, which is approx. 33.8-ounces. Clean up is easy, the gun comes with a cleaning brush and multi brush.
Date published: 2016-11-23
Rated 5 out of 5 by from Works as expected if used properly Read directions prior to using! Certain paints need to be thinned. Most of the negative reviews on this page are due to User Error. The gun works as expected straight out of the box. Follow the instructions for spray patterns,pressure and paint usage and you should be fine. I have purchased 3 of these guns for refinishing jobs. As long as this gun is not abused and is cleaned properly it works amazingly. The only issues I have had were due to my workers dropping the cup and denting the top, trying to over tightening the lever to secure the cup, and not cleaning the gun properly. Make sure you have a big enough compressor for the job you are doing or the paint or stain you are using will start to spatter due to low pressure. HAPPY HUNTING
Date published: 2016-08-30
Rated 5 out of 5 by from My new spray gun is great. This spray gun performs great. It comes with the tools necessary for cleaning all of the paint from its nozzle and siphon tube.
Date published: 2016-10-19
Rated 5 out of 5 by from Great General Purpose Spray Gun If you are new to spray painting this is your gun. It is easy to set up and use. It does not require the high volume of air that HVLP guns do so it will run off of most good sized compressors. Clean the gun well before first use to get all oils and contaminants from the manufacturing process and clean regularly after use. It's best to have a inline regulator and filter just before the gun on your air line. Then just filter your paint as you pour it into the cup and attach the air line. Set the spray pattern, fluid control and air and your painting.
Date published: 2016-12-31
Rated 5 out of 5 by from Faster Painting Strong design that was easy to hook up and disconnect between the jobs. THe unit is easy to use and fill, with a strong design that can take a beating when accidently dropped. The fill tank is easily separated, cleaned out and reattached. The nozzle control has made it easier to limit the spray and maximize the paint usage. The weight balance has made using the sprayer easier for longer period of time and allows you to keep going without getting tired.
Date published: 2016-11-29
Rated 4 out of 5 by from It was really easy to set up and use. You do have to play with the paint to water ratio a bit to ... It was really easy to set up and use. You do have to play with the paint to water ratio a bit to get a nice even spray. But once you figure that out it moves a long quickly. If you don't have enough water in there then the tip gets clogged quickly. Everything just wipes off and I took it all apart and hosed it out. Definitely much better then using rollers on the outside of the house!
Date published: 2016-12-09
Rated 3 out of 5 by from HUSKY SPRAY GUN I am re painting a cargo trailer and I got this spray gun to paint it a gloss white. The gun was easy to set up. It was easy to dilute the paint for use with this gun. I have never used a spray gun before so I had a bit of trouble at first but the gun was easy to use. The only problem I had was that the gun would not spray right without leaving the can loose on the gun. I could not figure it out so it took me longer to paint the trailer then it should have. After finishing the job with the can loose, I was cleaning the gun and found that the vent was plugged from the factory. I unplugged the vent, it was then that the gun was working as it should. I would recommend that anyone who buys this gun make shure that the vent isn't plugged before your first use. To check the vent, you have to remove the plastic tube from one end and blow air through it with your mouth. If that end is open, check the other end the same way. The end that was plugged was the end that is under the clamp on the top.
Date published: 2016-11-25
Rated 3 out of 5 by from painting well never got to use it was going to paint with latex paint then found out after opening it up you can use latex paint so i give it to my soninlaw
Date published: 2016-08-17
  • y_2017, m_1, d_20, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_, sid_203496910, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT