Model # SK606

Internet #203445904

IDEAL Security Flood Water and Overflow Alarm

IDEAL Security

Flood Water and Overflow Alarm

$11.61 /each

Frequently Bought Together

Product Overview

Flood and overflow alarm. Water damage is the most frequent and expensive insurance claim. Flood alarms can provide early warning to help avoid or minimize potential damage from leaky roofs, appliances, burst pipes, sewer backup, heavy rainfall, overland flooding, or rapidly melting snow and ice, leaks can go undetected for hours or even days. A water detector can provide early warning to minimize damage from leaks or floods. This unit is stand alone and does work with Ideal's wireless systems. Unit will play music or sound alarm when water is detected and will continue to sound until no more water is detected or battery dies. Unit has a built in 105dB alarm with a six foot long sensor wire.

  • Water damage is the most frequent and expensive insurance claim
  • Install in areas where water leakage is a concern
  • Use near washing machines, dishwashers, showers, bath tubes, water tanks and sump pumps
  • When water detected can activate music or alarm
  • Music or alarm will continuously sound until either turned off, removed from water or battery dies
  • Battery included
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can I use this product in sewer septic tank outside?

Can I use this product in sewer septic tank outside?
Asked by: Jj
You can use it where you want to monitor water leakage. But keep in mind that this sensor SK606 will sound the alarm until the battery is dead once water is detected. Do not use when temperature is below 14F (-10C), it may freeze the battery.
Answered by: IdealSecurity
Date published: 2017-04-18

Is this battery operated? What is the purpose of the cord?

Asked by: Honey
The wire is to connect the sensor to the receiver. This way you can put the sensor close to where water may be detected and the receiver can be put higher so as it does not get wet.
Answered by: IdealSecurity
Date published: 2016-11-02
  • y_2017, m_4, d_23, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_203445904, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 94ms

Customer Reviews

Flood Water & Overflow Alarm is rated 4.6 out of 5 by 5.
Rated 5 out of 5 by from Great idea Live in a on the second floor of a condominium and AC drain pipes clogs frequently , now with this simple alarm system gives u a warning saving u tons of money. I recommend it
Date published: 2016-08-02
Rated 4 out of 5 by from So Far, So Good I've installed one of these flood water & overflow alarms over a sump pump. The sending unit is on the sump pump cover with the long, attached wire running up to the 9V battery-powered receiver which is simply setting on a concrete shelf. I used a lithium battery so I don't have to change it for a while. As the instructions recommended, I tested the unit before doing anything and it worked fine. It can be set to sound "a tune" or an alarm sound...whichever you prefer. Either way, it's plenty loud. I've rated nearly everything as "good" only because it hasn't sounded the alarm by itself for any reason. Either way, It *looks* like it'll work fine. We'll see.
Date published: 2014-04-01
Rated 4 out of 5 by from Does the job but with a notation This was easy to install and works as advertised. The only little issue is that the sensor is to be placed at a level to detect a water level such as a wall. I have it under the sink and want to know if any waters leaks on the floor. It the sensor is placed with the suction cup on the floor it won't detect water until it is higher than the sensor base. To solve the problem I put the sensor pads face down on the floor (suction cup up) and taped it down but so water would hit the sensor pads. Works fine.
Date published: 2015-05-19
Rated 5 out of 5 by from Perfect for my intent , A Mcguyver type project. This was perfect for the price and how I intended to use it. Washing machine drain overflowed into unfinished basment. Not alot of water hit the ground before I shut down the machine. Placed a narrow tall plastic trash can below the drain trap( which is on the wall behind the washer) area. Placed sensor unit into bottom of trash can. Issue solved .
Date published: 2014-11-11
Rated 5 out of 5 by from Water detector Can't be any easier to install and at a low low price. This device could save you hundreds in repairs when detected early
Date published: 2014-10-28
  • y_2017, m_4, d_23, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_203445904, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms