Model # QLM-00

Internet #100051195

Store SKU #641654

InSinkErator Quick Lock Mount for Garbage Disposals
0050375002437

InSinkErator

Quick Lock Mount for Garbage Disposals

  • Allows fast and easy replacement of disposal
  • Fits a standard 3-1/2 in. diameter sink drain
  • For use with all InSinkErator garbage disposals
$15.99 /each

Frequently Bought Together

Product Overview

The InSinkErator Quick Lock Mount is designed to be used with InSinkErator disposers and features a twist-on, twist-off design to make fast work of replacing. The polished stainless-steel sink flange complements stainless-steel sink basins.

  • Twist-on, twist-off quick lock design
  • Available only from InSinkErator
  • Polished stainless steel finish
  • Easy installation

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

How do I remove the old mount from the sink

The disposal came out from the twist lock flange. Now how does the flange and sink basket get removed? The flange just goes round and round but does not unscrew. I can't pry it off. Do I need a crowbar or blowtorch? :)
Asked by: 572SubEye
There are three set screw that that allow you to release the screw part of the assembly where the disposer goes. Once loosened, you will see a snap ring around the bottom. Pry this loose, and the whole thing comes apart. Then you just have to push the top of the drain up and out of the sink. Good luck. It's quite easy once you see the snap ring.
Answered by: Anonymous
Date published: 2017-01-17

Is this the same assembly ?

Is this the same assembly that comes with a new Insinkerator disposal or is this a better/quicker/easier mounting system?
Asked by: kwinkle
Mine seemed pretty much the same.
Answered by: Anonymous
Date published: 2017-01-17

Kohler Wheatland ?

I'm buying a new Kohler Wheatland cast iron sink. I would like to re-use my Sears Kenmore 3/4 HP disposal, which is currently using an older Insinkerator quick lock mount as this disposal works great. I'd like this quick lock mount as it's nice and shiny and it would match the other drain on my new sink. I measured the drain opening on the new sink, and it is 3 3/4 inches. This Insinkerator says it fits a 3 1/2 inch opening. My question is will this quick lock mount work with my new sink without leaking even though it's 3 3/4 ? Thank you in advance
Asked by: MD
I would imagine so. The quarter inch difference means that there is a one eighth inch space all around the insert, which should not be a problem. Remember to put sealer--putty, gasket, or plumber's goop around the insert. NOTE: Try to resist the urge to wipe off the stuff that squeezes out. Wait until it has dried completely. Then just pull it off easily. In this way you don't smear the goop or whatever on the new sink, making that stuff very hard to remove.
Answered by: Anonymous
Date published: 2017-01-17

Will this fit mine?

Will this fit on top of my Insinkerator?
Asked by: r1930
Hi r1930, this is Belle of InSinkErator Customer Service. The Quick Lock Mounting Assembly fits on top of all InSinkErator Disposers. The sink flange that comes with it is 1 ½ inches in height and can accommodate up to a maximum of ¾ inch thick sink. It is also designed to fit through a standard 3 ½ inches sink hole opening. If you have further questions, you may contact the AnswerLine at 1-800-558-5700. Thanks!
Answered by: InSinkErator
Date published: 2016-03-13
  • y_2017, m_3, d_21, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_, sid_100051195, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • QUESTIONS, PRODUCT

Customer Reviews

Quick Lock Mount for Garbage Disposals is rated 4.6 out of 5 by 34.
Rated 5 out of 5 by from This drain with flange for the garbage disposer is rather easy to install. It is a standard des... This drain with flange for the garbage disposer is rather easy to install. It is a standard design, but one I wish they would simplify. It is always a chore to lift that heavy grinding machine and align it with the screw on the flange. Now mine is installed and hopefully will remain there for a good length of time.
Date published: 2017-01-17
Rated 5 out of 5 by from We were in the middle of a leaking sink crisis and thankfully Home Depot had this item. We were ... We were in the middle of a leaking sink crisis and thankfully Home Depot had this item. We were able to replace this part and fix the issue without replacing the entire disposal - whewww.
Date published: 2016-12-27
Rated 5 out of 5 by from Easy to install Good part exchange for badger and insinkerator disposerd
Date published: 2017-01-10
Rated 5 out of 5 by from Easy installation and seems to be durable. Easy installation and seems to be durable.
Date published: 2017-01-25
Rated 5 out of 5 by from Top notch and easy to install... Top notch and easy to install
Date published: 2017-03-07
Rated 4 out of 5 by from Easy to assemble Easy to assemble
Date published: 2017-02-08
Rated 5 out of 5 by from EZ to instalal Assuming you have a skill level of 2 or 3 out of 5 for "handymanness" this unit was self explanatory to install. My previous mount came loose causing some water drip and corrosion. I felt it best to replace the mount. It went together very easily. Even the lock ring was not a hinderance. The actual disposal unit, on the other hand, is a two person job to install. One to hold it up in place and one to guide and tighten. Oh yeah. Don't forget the plumbers putty. This unit is an exact match to the OEM one from the original install
Date published: 2016-08-30
Rated 5 out of 5 by from Replacement Quick Lock Mount for Insinkerator The Quick Mount was easy to install, First disassemble by removing the snap ring and it comes apart. It was more difficult to get into the space where I had to work than it was to reinstall.
Date published: 2016-08-30
  • y_2017, m_3, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_, sid_100051195, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 27ms
  • REVIEWS, PRODUCT