Model # RP2710

Internet # 100672121

1 gal. Satin Rubber-Based White Swimming Pool Paint

$48.97 /gallon



Model # RP2710

Internet # 100672121

The Insl-X 1 gal. Satin Rubber-Based White Swimming Pool Paint is a low-VOC product. This paint is suitable for freshwater and saltwater use, and provides a decorative coating for most in ground masonry pools. It is an ideal replacement for older chlorinated rubber-based paints. The paint provides a durable film that resists mold and mildew growth to maintain a lasting pristine appearance.

California residents: see  Proposition 65 information

  • Designed for residential and commercial, new and old, in ground masonry pools
  • Can be used on concrete, gunnite and marcite (integrity of marcite or gunnite pools must be sound and solid)
  • Suitable for application with a brush, roller or sprayer
  • Rubber-based formula is designed for underwater use to replace older chlorinated rubber-type pool paints
  • Resists UV damage and pool chemicals for lasting color and durability
  • Resists fading, fungus, algae, abrasion and alkalis for lasting beauty
  • Resists mold, mildew and algae to maintain a pristine appearance
  • Provides up to 350 sq. ft. of coverage
  • Waterproof formula is suitable for use in freshwater and saltwater
  • Low-VOC product complies with volatile emission standards outlined by the Ozone Transport Commission
  • Satin finish provides a decorative coating
  • Cleans up with mineral spirits
  • Self-priming on most properly prepared masonry pool surfaces
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Container Size 
1 GA-Gallon 
Coverage Area (sq. ft.) 
Application Method 
Coating Product Category 
Color Family 
Dry to touch (min.) 
Mildew Resistant 
Number of coats recommended 
Paint Product Type 
Pool and Pond Paint 
Paint/Stain Base Material 
Paint/Stain Clean Up 
Mineral Spirits 
Paint/Stain Key Features 
Low Temperature,Mildew Resistant,UV/Fade Resistant,Waterproof 
Paint/Stain/Waterproofer Product Type 
RGB Value 
Skid Resistant 
Time before recoating (hours) 
UV Resistant 
Water Compatibility 
Salt or Fresh Water 
Warranty / Certifications
Manufacturer Warranty 
See Product Label 


Color Family: Whites
Sheen: Satin
Price: $40 - $50
Brand: Insl-X
Container Size: 1 GA-Gallon
Coverage Area (sq. ft.): 350
Mildew Resistant: Yes


Rated 4.5 out of 5 by 15 reviewers.
Rated 5.0 out of 5.0 by Good product Very thick paint but very good for such of a very duty place like a pool. June 20, 2013
Rated 4.0 out of 5.0 by good product product went on well. I used an airless sprayer to apply the product. followed the instructions exactly as shown on the label, especially the use of fan(s) to remove fumes. the only negative was it did not cover as well as indicated it would. May 1, 2011
Rated 4.0 out of 5.0 by Good Quality at a Better Price This paint seems to be a high quality product. I applied two coats to my pool, after pressure-washing off the old paint, and making some minor plaster repairs. The coverage was somewhat less than advertised, but that could be due to the condition of the surface that I was painting. I could have used a couple of gallons more than I calculated for a 20 x 40 pool. The paint looks good. Be sure to keep it dry for the full seven to ten days though, or it will bubble up. I got some rain after 4 days, and got some bubbles in the very bottom of the pool. July 1, 2014
Rated 5.0 out of 5.0 by This product has made the pool look like 'new'. Just like any paint, the key lies in surface preparation. Even at that, my experience is that after some 4 to 5 years it starts to shed a chalky substance. I'd expected rubberized paint to last far longer. April 4, 2013
Rated 4.0 out of 5.0 by Sealed the pool... I had a couple cracks leaking. I used some two part epoxy, then I followed with this paint, follow the directions. Still holding up, no leaking. Works good. April 30, 2013
Rated 5.0 out of 5.0 by Great product The paint was exactly as advertised. Be sure to follow directions exactly; needs quite a bit of mixing. It was easy to apply with a roller, coverage was exactly as noted. So far, pool looks great! July 7, 2015
Rated 5.0 out of 5.0 by very good product Painted the bottom of a fifty year old cement swimming pool, coverage was about two hundred square feet per gallon, surface was rough, depending on surface and how long ago it was painted, you will want to adjust per gallon coverage. Use brushes and rollers that are disposable, it is impossible to clean them after using this rubber based paint. June 16, 2015
Rated 1.0 out of 5.0 by Coverage not as stated, and it is turning yellow I used more paint than the website suggested. You need to keep mixing the product to make sure it stays consistent. The pool looked great the first week or so, and now it is turning yellow where it gets direct sun most of the day. On the shady side it still looks white. June 26, 2013
  • 2016-02-01 T08:34:46.211-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_15, tr_15
  • loc_en_US, sid_100672121, prod, sort_default
2 >>