Model # EKB-03-101

Internet #204312769

Instant Mosaic Peel and Stick Brushed Stainless Color 6 in. x 3 in. Metal Wall Tile (8-Pack)

Instant Mosaic

Peel and Stick Brushed Stainless Color 6 in. x 3 in. Metal Wall Tile (8-Pack)

  • 3 dimensional, paintable wall/celing/wainscoting panels
  • Build visually striking feature walls or repair damaged walls
  • Construction adhesive or contact cement reccomended
$1098 /each

Frequently Bought Together

Product Overview

1 sq. ft. of 6 in. x 3 in. Brushed Metal Subway Tiles - Instant Mosaic tiles add a luxurious touch into your kitchens, bathrooms or featured walls. Tiles can be installed in different ways to create visually striking patterns. Easy to install: no glue or grout needed. Just peel and stick. Superior adhesion on most flat, dry and free of dust surfaces. Tiles can be applied over drywall or existing tiles. Suitable for traditional, contemporary or transitional rooms. Utility knife or circular saw recommended to cut this tile.

  • 1 square foot per piece, each piece sold individually. Piece weight equals 1 lb.
  • Grade 1, first-quality metal tile for wall use
  • 3 in. width x 6 in. length x 5 mm peel and stick tile
  • Glazed smooth finish with a medium sheen and uniform appearance in tone
  • Completely frost resistant for indoor or outdoor applications
  • Residential and commercial use
  • Learn how to get a Lifetime Warranty by using Custom Building Products from The Home Depot. Visit
  • Learn how to get a Lifetime Warranty by using Custom Building Products from The Home Depot.┬áVisit
  • Don't forget your installation tools
  • All online orders for this item ship via parcel ground and may arrive in multiple boxes
  • It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can these tiles be installed on a plywood wall?

The existing wall is sanded and flat plywood in a 3 season cabin that is unheated in the winter. Can these tiles be installed directly on the plywood or is some type of treatment required for the installation?
Asked by: Snowbirds
Answered by: Berto
Date published: 2015-09-20

What kind of metal are they made from? Are they magnetic?

Asked by: angel
No they are not magnetic. They have a thin layer of Stainless steel on one side and sticky stuff on the other and looks like plastic in the middle. You have to be careful as each one has a bend in it that will have to be straightened out or it will not line up right.
Answered by: Berto
Date published: 2016-03-03

How many square feet will one 8 pack of tiles cover?

Asked by: Lyvie
This product covers one square foot.
Answered by: CommunityAnswer
Date published: 2016-03-03

Can I install these over a mirrored surface?

I have a large mirror in my bathroom that has lost its finish on the bottom. Instead of replacing it, I wonder if I could apply these tiles across the bottom as a decorative accent.
Asked by: LeeH
Answered by: Berto
Date published: 2015-09-20
  • y_2017, m_5, d_25, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_, sid_204312769, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms

Customer Reviews

Peel and Stick Brushed Stainless Color 6 in. x 3 in. Metal Wall Tile (8-Pack) is rated 4.1 out of 5 by 25.
Rated 5 out of 5 by from Easy install, looks great I installed about 27 square feet of these behind my granite tile counter tops. The surface was 1/4" Hardy Backer screwed to 3/4" plywood and was flat. Screws were well countersunk, joints between the backer panels caulked with silicone, and the entire surface scraped with a putty knife before tile installation. The idea is to remove any surface defects or caulk that would cause a tile to not lay flat. Surface prep is very important. The adhesive on the tiles sticks very aggressively to the backer board and I didn't require any additional adhesive. I had to remove a couple of tiles I messed up, and it took a decent amount of effort using a putty knife and strong fingers. The removed tiles are unusable afterwards because the adhesive backing gets scraped off. The tiles also have a thin layer of foam behind the adhesive which helps overcome small surface bumps on the mounting surface. To cut the tiles, I would first apply blue painters tape in the approximate location of the cut, then measure and mark using a combination square and pencil. The cut was made with a large pair of metal shears, which cut pretty easily, but my hands would tire after about 6 tiles. After cutting, the shears would put a curl in the tile which was removed by flattening the tiles on the work table by hand. Like many of my projects, I chose the hardest way to install these, in a vertical herringbone pattern, which looks awesome when complete. I applied black, food safe caulk to the joint between the tiles and the granite. The quality of the tiles is pretty good, but you should inspect them as you unpack them. I found an occasional tile with surface defects. I would hold those tiles out and use them when I needed a tile cut. If I couldn't cut off the defect and the defect wasn't too bad, I could use the tile in the back corner or up under the upper cabinets where it wouldn't be noticed. After completion of the project, I've never noticed any of these tiles. I estimated about 10% waste which turned out perfectly.
Date published: 2014-12-31
Rated 5 out of 5 by from Stunning We redid our kitchen in our winter home using in stock big box store cupboards and so did not want to spend a lot of money on a backsplash. I also wanted to avoid the mess of ceramic or glass tile installation. Initially it took a bit to figure out the best way to cut the tiles. That proved to be using a utility knife, scoring the tile and snapping it. For smaller cuts around light switches and outlets, tin snips worked well. It took me about 8 hours to complete this project. The final result is stunning!
Date published: 2014-11-24
Rated 5 out of 5 by from Easy to install I struggled with selecting the "right" tile for the backsplash. I researched glass tiles but really wanted the clean/modern stainless steel look and since I am "DIY", I wasn't thrilled about mastik, grout & renting a tile saw to cut the glass tiles. I researched a number of products and took my chances & ordered the tile from Home Depot. (sight unseen…I had difficulty finding the product at any store). It was very easy to install (peel & stick - no mastik) - no mess! I layed out the tiles prior to putting them up so I would have the least waste. My husband used a bandsaw to cut the tiles while I measured, marked & put the tiles up. The one caveat is to make sure your surface is flat. We completed the project in a day. I would highly recommend it for a DIYer. It's been up for a month and the tiles are secure. Thanks to other previous reviewers who helped with the questions I had prior to this purchase.
Date published: 2014-08-05
Rated 5 out of 5 by from Great product! These peel & stick tiles were so easy to install. They were easy to cut for going around sockets. I recommend using a good box cutting blade. Just measure, score tile, and bend back and forth. The end just snaps off! I loved installing these.
Date published: 2014-06-09
Rated 4 out of 5 by from Easy Update I was looking for an easy way to update, and protect some weird spaces in my bathroom. There worked great- easy to install, I spaced them and added caulk to seal to give it a more tile-like look. I used a utility knife with a new blade and easily snapped the tiles in both directions. The downside is the tiles got a little banged up during shipping, some corners were upturned and edges. I am glad I ordered extra in case.
Date published: 2016-02-06
Rated 5 out of 5 by from Applied to Mirror. Love it! I have a large bathroom mirror that has lost some of the silver along the bottom and decided to try this tile as an accent to the mirror and cover the ugly part of the mirror. I left a question that was quickly answered. I followed Joseph's advice, using an oil based primer before application. The tile went on easily and is holding up well. I failed to order the trim at the same time, but found it in stock at another home improvement store. The most difficult part was getting the proper 45 degree cut on the trim. I'm very happy with the look of my project.
Date published: 2015-02-25
Rated 5 out of 5 by from Easy to install and looks great These were so much easier to install than actual tile. The stainless steel looks great against this tile, which I used as a backsplash. They are easy to cut, but use a box cutter not a hacksaw as they suggest. Make sure you get the placement exact because they will not budge if it goes on wrong.
Date published: 2014-01-08
Rated 5 out of 5 by from Great Product I purchased 9 packages and I couldn't be happier. Very easy to install and look great. Be sure you know where you want them placed because they STI(CK.
Date published: 2015-02-28
  • y_2017, m_5, d_25, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_, sid_204312769, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 128ms