Rated 4.2 out of 5 by 11
Rated 5.0 out of 5.0 by Busytee Good product
Really reduced the slickness on the tile in the shower. Great product
August 16, 2016
Rated 1.0 out of 5.0 by Realist Doesn't work on satillo tile
We applied it multiple times on the satillo tile, which is very slippery when wet, and just inside the house by the pool. All it did was maybe dull the shine. The tile is still slippery when wet.
August 16, 2016
Rated 2.0 out of 5.0 by ron Marginal effectiveness
I found the results of this product to be marginal regards reducing the slipperiness of the tile.
August 9, 2016
Rated 4.0 out of 5.0 by Tangy2 Truly an amazing product.
Used this product to solve an issue with my basement bathroom floor. The bathroom was extremely slippery when wet. Applied the slip resistant product, following the instructions as stated. The product did not change the appearance of the floor but the results were amazing after 2 applications. Yes, it does work. Tested the tiled floor with wet feet and could not get my feet to slip or slide no matter how hard I tried.
October 15, 2015
Rated 4.0 out of 5.0 by Mikkel1955 Works great.
I have ceramic tile on the floors in both the kitchen and bathroom. If you get any water on it, it is about like walking on ice. I plan on replacing it sometime in the future, but until I can, this is a great fix. As long as you follow the instructions, you end up with a floor that is safe to walk on, without changing the appearance of the floor. I am not sure how long it will last, but it is still going strong after 6 months.
Installation is easy. You first clean the floor and grout with a good cleaner. I used "Heavy Duty Tile and Grout Cleaner" by the same people, and it worked well. After cleaning and letting it dry, you apply the anti-slip treatment. Once it drys, you clean it again to remove any residue. You can apply more then one coat if you need extra traction. But one coat did it for me.
May 3, 2016
Rated 5.0 out of 5.0 by Kiki Works very well!
This is a 3 step process and is very easy to apply. First you must clean and rinse with the tile and grout traction cleaner, then apply the slip resistant treatment and the last step is the tile and grout cleaner again, which neutralizes the slip resistant coating. You can use a sprayer or a squeegee to apply. I used a squeegee and it was very easy. It is a bit time consuming but the results are well worth it. My tiles were very slippery especially if I came in from the rain. This process makes them absolutely safe. You will not see any difference in the look of the tiles which is exactly what I wanted. I am very happy and highly recommend this product.
February 29, 2016
Rated 5.0 out of 5.0 by reb277 Works well, used it on porcelain tub
I wanted to get rid of some anti-slip decals on the floor of my tub, and since the product states that it will work on porcelain, I decided to try this on the tub floor. After removing the decals (no easy task) I applied the InvisaTread with a sponge. Since my tub is white I didn't really notice the 'white residue' described in the instructions. I'm pleased to report that the InvisaTread works as described and made the tub floor slip-resistant.
April 16, 2016
Rated 5.0 out of 5.0 by LindaLW Very effective treatment for slippery areas
As we get older, one has to consider safety around the home, and this is a very effective means to making home safer. We have this stamped concrete around the front of our home, and last year, I had a bad fall on the ice just at the front door. So close, and yet, so far. So this year we have used this InvisaTread treatment everywhere we might be liable to slip! Good idea for a lot of people. It's not something that takes away from the beauty of the stamped concrete, either, you'd never even know it was there, so don't worry about the colors changing or anything. I'd recommend it for any home.
October 11, 2015