0793573770240

InvisaTread

Model # IVT32

Internet # 203529292

1-qt. Slip Resistant Treatment for Tile and Stone

$34.97 /each

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # IVT32

Internet # 203529292

The InvisaTread family of products helps to protect against the risk of slip and fall accidents at home, at work and at play. InvisaTread has been formulated to increase the slip resistance of most tile, stone and mineral surfaces. Slip resistant tile has never been so easy, safe or effective.

  • Quick, easy and safe to use
  • InvisaTread is not a non slip coating, but rather a safe and effective process that works on most hard surfaces
  • Ideal for use on porcelain, ceramic, quarry, honed stone, slate and more
  • Use in bathtubs, showers, entryways, walkways, pool areas and kitchens or anywhere there is a stone, tile or mineral surface that is slippery when wet
  • Do not use InvisaTread on polished marble
  • Use InvisaTread straight from the bottle, do not dilute InvisaTread

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Maximum coverage area (sq. ft.) 
100 
Product Width (in.) 
3.25 
Details
Color Family 
Yellows / Golds 
Commercial / Residential 
Commercial / Residential 
Flooring Product Type 
Accessory 
Indoor/Outdoor 
Indoor/Outdoor 
Product Weight (lb.) 
2 lb 
Returnable 
90-Day 
Warranty / Certifications
Manufacturer Warranty 
Lasts up to 3 years with proper care and maintenance. www.invisatread.com, ph# 888.842.3356 

MORE PRODUCTS WITH THESE FEATURES

Price: $30 - $40
Brand: InvisaTread
Review Rating: 2 & Up
Search
7 Questions7 Answers

Customer Questions & Answers

1-qt. Slip Resistant Treatment for Tile and Stone
1-qt. Slip Resistant Treatment for Tile and Stone

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can this product be applied over recently sealed Saltillo?

This question is from 1-qt. Slip Resistant Treatment for Tile and Stone
Asked by
Read all my Q&A
May 21, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 22, 2016
Answer: 
No. InvisaTread cannot be applied to a sealed surface. InvisaTread is a micro-etching solution that needs to contact the natural mineral surface. To use InvisaTread on a sealed surface you must first step the sealer, then etch with InvisaTread, then reseal with a water-based impregnating sealer (we recommend StonewalledTM Sealer).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

how many sq ft will a gallon do and is it available in a 5 gal size

This question is from 1-qt. Slip Resistant Treatment for Tile and Stone
Asked by
cape coral, fl
Read all my Q&A
March 28, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 29, 2016
Answer: 
1 gallon will cover approximately 400-500 sqft. You will get closer to the 500 sqft if applying with a garden type pump up sprayer (the recommended method). Yes we do make 5 gallon pails (coverage approx 2000-2500 sqft)
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will this give the tile a rough texture, making it hard to scratch by vandals?

This question is from 1-qt. Slip Resistant Treatment for Tile and Stone
Asked by
Read all my Q&A
January 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

January 28, 2016
Answer: 
No, InvisaTread will not give a rough texture to the surface. InvisaTread is not a coating, it is a micro-etching treatment that will not change the look or feel of the surface. Once it it rinsed off, after the tested dwell time, there is nothing left but the original surface. InvisaTread will not affect the vulnerability of a surface to scratching or vandalism. If the surface could be scratched before Read More
No, InvisaTread will not give a rough texture to the surface. InvisaTread is not a coating, it is a micro-etching treatment that will not change the look or feel of the surface. Once it it rinsed off, after the tested dwell time, there is nothing left but the original surface. InvisaTread will not affect the vulnerability of a surface to scratching or vandalism. If the surface could be scratched before the InvisaTread treatment it will be after, as well. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

What temperature and drying time for outdoor installation?

This question is from 1-qt. Slip Resistant Treatment for Tile and Stone
Asked by
Read all my Q&A
November 3, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 4, 2015
Answer: 
InvisaTread is a water based product and will freeze/evaporate depending on the environmental temps. We recommend surface and ambient temps of 40 degrees F and rising... up to 90 degrees. Do not allow to freeze, run-off or evaporate. The surface should remain saturated with the InvisaTread for the entire dwell time. PLEASE NOTE: InvisaTread is NOT a coating, it is a micro-etching solution, that is Read More
InvisaTread is a water based product and will freeze/evaporate depending on the environmental temps. We recommend surface and ambient temps of 40 degrees F and rising... up to 90 degrees. Do not allow to freeze, run-off or evaporate. The surface should remain saturated with the InvisaTread for the entire dwell time. PLEASE NOTE: InvisaTread is NOT a coating, it is a micro-etching solution, that is effectively permanent. Nothing to ware off or re-apply. There is no "drying" or "curing" time. There is, however, a DWELL time which determines how much increased traction is felt. The installation process is Clean>Apply>DWELL>Rinse. Dwell time is roughly 6- 16 minutes, depending on the density of the surface or glaze, test a small area or extra tile to determine you unique dwell time. Start with 6 minutes and work up to the desired traction. After the Rinse step the InvisaTread is removed leaving only the original surface. Thanks for you question and your interest in Surface Solution anti-slip products. Good Luck! Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-05-29 T14:05:10.332-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203529292, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 51ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 2.7 out of 5 by 3 reviewers.
Rated 1.0 out of 5.0 by doesn't work! I cleaned my tiles twice...then applied and even left it on for 30 min to make sure I had a good grip and nothing...i still slip when its wet...i'm returning it. January 12, 2016
Rated 4.0 out of 5.0 by No more slippery shower floor Using it was difficult -- couldn't do it myself, needed assistance from a friendly contractor. He didn't understand why the instructions were so complicated, but did the job in just about 30 minutes. I never could have managed it. But the result, so far, is excellent. My tiled shower floor is no longer slippery. I hope it lasts, but I have lots more of the stuff left over if it needs another application. July 25, 2015
Rated 3.0 out of 5.0 by Seems to wear off Went on easily. It is a topical product and it is invisible when dry, which is good. At first it made the floor slightly less slippery which was what I was looking for. It did not have a dirty or sticky feel. The problem is that after a month or two I find that I have to re-apply it. I would have liked something more permanent. November 5, 2013
  • 2016-05-29 T14:11:03.137-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_203529292, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT