0727396155182

James Hardie

Model 215518

Internet #100064049

Store SKU #462260

HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding

$7.48 /each
  • Fiber cement siding resists cracking, rotting, swelling and pests
  • Our Select Cedarmill finish has a soft texture that mimics wood
  • Pre-primed and engineered to enhance the performance of paint

Frequently Bought Together

Product Overview

All HardiePlank lap siding comes in a variety of looks and textures, all of which are Engineered for Climate. We are so sure about how well the HardieZone system will perform, HardiePlank lap siding comes with a 30-year no prorated, transferable, limited warranty - our strongest warranty ever.

California residents: see   Proposition 65 information

  • Resists damage from moisture
  • Resists cracking, splitting, rotting and swelling
  • Resists termites and insects
  • Superior performance in high wind and hurricane areas
  • Resists flame spread
  • Complete exterior available in lap, shingle, panel, fascia, trim and soffit
  • Paint lasts longer than on wood
  • Pre-primed or available in ColorPlus Technology a factory applied color finish with a variety of color options
  • Please see the ProDesk associate for color options available
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

86 Questions131 Answers

Customer Questions & Answers

HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
 
7 answers

how do i deternin how much to order

This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
Asked by
tyler,tx
Read all my Q&A
April 2, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
sanger ca
Read all my Q&A
Home Improvement Profile: DIYer
August 5, 2016
Answer: 
First you can not just use square footage. You need to figure the exposure. The factory exposure of 8.25 boards is 7" however I have looked at pro forums and with that exposure you most likely will want ot face nail at the bottom of each board with a siding nailer.
If you are going to blind nail I recommend less exposure. I left 6 " with a 2.25 overlap. It will be tighter more wind resistant and won't
Read More
First you can not just use square footage. You need to figure the exposure. The factory exposure of 8.25 boards is 7" however I have looked at pro forums and with that exposure you most likely will want ot face nail at the bottom of each board with a siding nailer.
If you are going to blind nail I recommend less exposure. I left 6 " with a 2.25 overlap. It will be tighter more wind resistant and won't flap when someone pulls on it.
Figure how long each side is going to be and how many vertically you need. At the top of each wall I used a water impervious board as the last board. Used as trim but overlapping the siding and then nailed on. It gave a clean finished look. Same on gable ends only you still can only butt the siding against the trim. At the very top I used stainless siding nails predrilled and hand driven and then caulked the crack between the trim and siding.
The siding was blind nailed with 1.75 stainless roofing nails used with a roofing nailer and a sequential trigger. Look it up if you don' t know what it is.
Don't forget to put flashing behind every butt joint siding to siding and do not caulk those joints only where it butts against trim or windows. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
sarasota fl.
Read all my Q&A
Home Improvement Profile: Professional
November 18, 2014
Answer: 
each board is 12 feet long, x 12" per foot = 144 " long. With the overlape of 1 1/4" each board covers 7". (81/4-1 1/4 =7 ) 7" x 144" = 1008 square inches. 1008 si divided by a square foot (144si ) = 7sf coverage per board. 7 not 8 not 8.25 do not listen to these other experts
+94points
94out of 94found this answer helpful.
Was this helpful?helpful94unhelpful0

Asked by
Southern Colorado
Read all my Q&A
Home Improvement Profile: Professional
August 23, 2014
Answer: 
When factoring in the 1-1/4" lap using the lap guide brackets, you will get 7" of vertical coverage per board. That works out to 8.8 sq. ft per board.
-26points
9out of 44found this answer helpful.
Was this helpful?helpful9unhelpful35

August 20, 2014
Answer: 
You need to take the square footage you need to cover and divide this by the desired exposure to get the numer of pieces you need
-27points
7out of 41found this answer helpful.
Was this helpful?helpful7unhelpful34

Asked by
Read all my Q&A
May 2, 2014
Answer: 
Snuffy, it depends on what the exposure i if it is 8 inches then each board will only cover 8 SQFT
-20points
4out of 28found this answer helpful.
Was this helpful?helpful4unhelpful24

Asked by
Read all my Q&A
May 2, 2014
Answer: 
Snuffy,it depend on the exposure, if this is 8 inches, then each board will only cover 8 sqft.
Ron
-19points
5out of 29found this answer helpful.
Was this helpful?helpful5unhelpful24

April 15, 2014
Answer: 
Hi Snuffy,
Each board will cover 8.25 feet.
Divide you total square footage by 8.25 to determine how many boards you will need.
Thus if you want to cover 900 square feet, divide 900 by 8.25
to get 109 boards. Buy extra boards to allow for errors and cuts.
Mike,
-14points
32out of 78found this answer helpful.
Was this helpful?helpful32unhelpful46
This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
 
4 answers

Where can I get this but with the smooth finish?

This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
Asked by
San Antonio
Read all my Q&A
September 29, 2015
Does Home Depot carry this stuff but with the smooth finish? If not where can I buy it?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Read all my Q&A
January 8, 2016
Answer: 
Just turn it over and prime and paint it.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Middleburg,Florida
Read all my Q&A
Home Improvement Profile: Professional
September 30, 2015
Answer: 
If Home Depot des not have it contact where it is made in Plant City Florida..813-707-5000
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Middleburg,Florida
Read all my Q&A
Home Improvement Profile: Professional
September 30, 2015
Answer: 
If Home Depot does not carry smooth finish and believe they may not,try contacting where it is actually made in Plant City Florida...Phone number 813-707-5000 many people doesn't know this contact,hope it helps.Thanks
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

September 30, 2015
Answer: 
Generally it is not a stocked item but can be special ordered
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
 
4 answers

Do you just chalk the seams or is there a backing to prevent moisture form seeping in. I 'm concerned about expansion and contraction at the seams

This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
Asked by
Albany,oregon
Read all my Q&A
May 22, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
CA
Read all my Q&A
Home Improvement Profile: Professional
November 16, 2015
Answer: 
No siding is waterproof. You need to install this over a waterproof membrane or you will develop dryrot on your plywood or studs and potentially mold in your insulation and/or interior gypsum board.
Tyvek home wrap or something similar. Just staple the paper to the studs/plywood, and overlap the sheets (+/-12") so there is no exposed plywood or studs.
+10points
10out of 10found this answer helpful.
Was this helpful?helpful10unhelpful0

Asked by
Pflugerville tx.
Read all my Q&A
September 20, 2014
Answer: 
you start at the bottom overlaping the second one over the first pc, approximately 1"
-7points
4out of 15found this answer helpful.
Was this helpful?helpful4unhelpful11

May 24, 2014
Answer: 
It is best not to caulk the seams. The maintenance is greater as the caulk will eventually fail and you will need to remove and recaulk, and this usually means you have to repaint the whole wall.
There are joint slip sheets JH recommends. The details of this installation are available in the best practices guide at the following link: Read More
It is best not to caulk the seams. The maintenance is greater as the caulk will eventually fail and you will need to remove and recaulk, and this usually means you have to repaint the whole wall.
There are joint slip sheets JH recommends. The details of this installation are available in the best practices guide at the following link: http://www.jameshardie.com/builder/products_siding_hardieplankLapSiding.py?openTab=jsnavLink4 Read Less
+21points
27out of 33found this answer helpful.
Was this helpful?helpful27unhelpful6

May 22, 2014
Answer: 
Hi Coriollis,
James Hardie does not recommend caulk at the seams.
They recommend flashing behind the joints.
For complete instructions visit www.jameshardie.com
Mike,
+21points
21out of 21found this answer helpful.
Was this helpful?helpful21unhelpful0
This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
 
3 answers

How many pc cedar plank 8.25 does it take to cover 1 square 6.75 reveal

This question is from HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
Asked by
Read all my Q&A
August 2, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Middleburg,Florida
Read all my Q&A
Home Improvement Profile: Professional
August 4, 2016
Answer: 
that will be 15pc. for 1 sq.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 4, 2016
Answer: 
It takes about 20 pieces to cover 100 square feet
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 3, 2016
Answer: 
Each piece covers about 7 square feet.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 5 6 »
  • 2016-09-08 T13:36:32.001-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100064049, prod, sort_default
2 3 4 5 6 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 110ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 10 reviewers.
Rated 5.0 out of 5.0 by GREAT SIDING AND GOOD LOOKING! I did my addition in this material and it was easy to install and paint. Great product. August 29, 2016
Rated 5.0 out of 5.0 by Great Stuff This is really nice siding. It's pretty easy to put up and is very durable. The pics are 2 or 3 years since it's been up and it still looks great. March 16, 2016
Rated 1.0 out of 5.0 by Delaminate I using this product after 10 years a lot of delamination around windows . The Colors change after few years and 8 1/4 plank is too wight for wind resist James hardie give poor after market service August 11, 2016
Rated 5.0 out of 5.0 by Awesome Product It was easy to use and looks awesome, wish i could do the whole house with this. for now just a repair. did i say it was easy January 7, 2014
Rated 5.0 out of 5.0 by best ever used I have built 3 sheds using this siding. The oldest is 25 years old now, and has only had to be painted once due to paint fading in the sun. Easy to use, easy to hang, and easy to maintain. I am buying more this weekend to do a remodel (replacement) of rotted wood siding on a 40 year old building. Only drawback is the dust made when using a saw to cut, but wearing a dust mask definately helps in that area June 25, 2015
Rated 5.0 out of 5.0 by Hardee planks Great product going to order more next week I like the way it takes paint and the consistency of the design May 19, 2015
Rated 5.0 out of 5.0 by EXCELLENT!!! This lap siding not only looks good but I think is the best product on the market. Its not the cheapest stuff on the market but it goes up so fast and easy and then comes pre primed on top of it. With some simple and fairly in expensive tools out there that can keep the sides perfectly level as you proceed up the wall it is really fast. Keep factory cuts next to factory cuts. Wonderful product all in all highly recommend it Bugs dont want it, fire resistent. Only thing I can knock on it, and it maybe to hard to handle but on long homes, 12' sections can be a pain. Would not mind some 16' or even 20'. July 11, 2009
Rated 5.0 out of 5.0 by Simply The Best This is the second time I have used this siding. Once to side my entire last house and now for my garage addition on a new house. This stuff is good quality. I really wanted to try LP Smartside, but just couldn't do it. The Hardi is a little more tedious to install, but the piece of mind of having it on once the install is complete makes the extra work well worth it. I have shears and a cement board saw blade and pretty much never went back to using the shears after using the saw blade. It is not good for your lungs to breath in the silica particulate, but I don't think it is a big deal if you are working outside and only do a couple installs in your lifetime. If you were doing it everyday, you would need the speed of the saw....I found it helps to set my leaf blower on idle on the work piece blowing the dust away as I cut. I try to do gang cuts when possible, but it seems that that many single cuts are invariably required for one reason or another. The Gecko siding gauge is a MUST HAVE if you are doing it solo and I would use them even if I did have someone to help me. I use the Rigid coil roofing nailer. It does a pretty good job of not over driving the nails. December 17, 2014
  • 2016-09-08 T15:45:02.259-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_10, tr_10
  • loc_en_US, sid_100064049, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT