Model # 100M0963

Internet #100658045

Store SO SKU #1000343220

Johnson Hardware 100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors
0086073103961

Johnson Hardware

100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors

$195.97 /each

Frequently Bought Together

Product Overview

The Johnson Hardware 100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors can be used for residential or commercial applications. It will accommodate 1 in or thicker doors weighing up to 200 lb. This sliding door hardware features a precision extruded aluminum box track design with convex rails for smooth operation.

  • For use with 1 in. or thicker sliding multi-pass doors up to 200 lb.
  • Steel-reinforced 1705 bottom guide slots into the 1050 extruded aluminum bottom guide track to hold doors in place
  • Box design helps prevent rollers from jumping the track
  • Tricycle ball bearing hangers
  • Convex track rails help reduce roller friction
  • Heavy-walled aluminum track is precision extruded to help provide smooth operation
  • Features Johnson's line-design fascia to help hide marks and scratches or to hold paint
  • Meets ANSI standards

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions5 Answers

Customer Questions & Answers

100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors
100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can the bottom track go into a routed groove in the floor? And can all three doors pass?

This question is from 100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors
Asked by
Corinth, MS
Read all my Q&A
August 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 19, 2016
Answer: 
Yes, the bottom tracks will fit in a 3/4" by 3/4" routed groove on the floor, and all three doors can slide independently from one end of the opening to the other.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 19, 2016
Answer: 
The full instructions for installation will be included.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Width of Wall

This question is from 100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors
Asked by
Seattle, WA
Read all my Q&A
October 23, 2016
How wide does the header have to be to install this? Can this be installed in a 2x4 construction wall?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 24, 2016
Answer: 
Assuming your doors are 1-3/8" thick, your header would have to be at least 5-1/4" thick. So it will not work in a 2x4 wall.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Thanks for your answer. Now that gives me one more question: What length of Track and Hardware Set for 3-Doors do I need for a 59 inch opening?

This question is from 100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors
Asked by
Corinth, MS
Read all my Q&A
August 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 20, 2016
Answer: 
Are you looking to hang 3 doors that are approximately 20" in a 59" opening? If so, you would get a 100M0723 and just cut the tracks down to 59". Typically, people go with two bypass doors in 59" openings, rather than a 3 door Multi-Pass.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

How many inches should I subtract from the finished opening for the top/bottom tracks and related clearance to arrive at the door height?.

This question is from 100MD Series 94 in. Track and Hardware Set for 3-Door Multi-Slide Doors
Asked by
Read all my Q&A
October 10, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

January 16, 2016
Answer: 
If surfaced mounted this track set is 3 3/8''H and if recessed mounted 2 3/4''H.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:31:52.182-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100658045, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 473ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 2 reviewers.
Rated 5.0 out of 5.0 by Excellant Product The rollers move my 32" x *84" x 1-3/8" hollow wood doors smoothly and effortlessly. The instructions lack some information on which screws to use where, but it can be figured out, even through there is an extra set of screws left over. The swing clamps on the roller post need to face outward, so you can get to them, but the outermost door will have to face inward because of the front trim board. September 6, 2015
Rated 5.0 out of 5.0 by great Product. very solid quality bought this product based on recomendation. I'm very satisfied. Might buy some more for future projects. September 6, 2011
  • 2016-10-30 T23:59:03.676-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_100658045, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 100ms
  • REVIEWS, PRODUCT