Model # 111602DR

Internet #100658008

Store SO SKU #1000343456

Johnson Hardware 111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors
0086073116022

Johnson Hardware

111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors

$96.86 /each

Frequently Bought Together

Product Overview

This Johnson Hardware 111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors is an adaptable sliding door hardware set designed for residential and light commercial applications. It will accommodate 3/4 in. or thicker doors up to 150 lb.

  • Good for use with 3/4 in. or thicker sliding bypass doors up to 150 lb.
  • Door weight is carried by 1025 ball bearing door hangers, so doors hang naturally to reduce possible warping problems
  • Convex rail design provides single-point hanger wheel contact for low roll resistance
  • Box design helps prevent rollers from jumping the track
  • Adjustable nylon door guides hold doors firmly in place and can be positioned for different door thicknesses
  • Heavy-walled, compact aluminum track is precision extruded for smooth operation
  • Meets ANSI standards
  • Tested quality: all Johnson Hardware is rigidly tested to meet ANSI standards

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions7 Answers

Customer Questions & Answers

111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors
111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

What tool is required to cut to specific size?

This question is from 111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors
Asked by
Read all my Q&A
July 29, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
ca
Read all my Q&A
Home Improvement Profile: DIYer
August 2, 2016
Answer: 
We didn't need to cut it, but I've cut similar metal on just my chop saw, but we also have a cut off saw and a sawzall, so any of those would work. If you are desperate a regular hacksaw would work, but is a lot more work than an electric saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 1, 2016
Answer: 
A hacksaw should work fine for you to cut through the aluminum track.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

can use one door?

This question is from 111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors
Asked by
Read all my Q&A
April 18, 2016
I'm trying to use it for out in the laundry room but I only need one door on it can I use it with just one?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
ca
Read all my Q&A
Home Improvement Profile: DIYer
August 2, 2016
Answer: 
Sure no problems you just install one track instead of 2, or if you want it to go clear across the room you can butt the ends of the tracks up to one another for a really long track.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 19, 2016
Answer: 
This can be used with just one.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Is there a maximum acceptable thickness for each door?

This question is from 111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors
Asked by
Fort Lauderdale, FL
Read all my Q&A
August 13, 2016
I hope to hang two 1.375" thick louvered slab doors, and still maintain the 3" overall depth described for your railing mounts. Also, if thicker doors such as these can be used, are the hangers mounted on the inner edges of the doors, where they're closest to one another, rather than centered, in order to keep them from getting stuck against one another as they pass?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 15, 2016
Answer: 
When you hang two 1-3/8" thick doors on the 111SD, you space the tracks 1/2" apart. The tracks themselves will take up 2.92" of space on the finished header, but the doors will take up a slightly larger footprint. The doors will take up 3.085" in the opening.
The hangers will be mounted in the center of the doors. Even if you attempt to offset the hangers, the doors will still take up the same Read More
When you hang two 1-3/8" thick doors on the 111SD, you space the tracks 1/2" apart. The tracks themselves will take up 2.92" of space on the finished header, but the doors will take up a slightly larger footprint. The doors will take up 3.085" in the opening.
The hangers will be mounted in the center of the doors. Even if you attempt to offset the hangers, the doors will still take up the same footprint due to the guides at the bottom setting the correct spacing.
Overall, for the 111SD, there is not maximum door thickness. You just space the tracks accordingly. The thicker the doors, the wider the finished header will need to be. Also, be sure not to exceed the 150 lbs per door rating. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

clearance space...

This question is from 111SD Series 60 in. Track and Hardware Set for 2-Door Bypass Doors
Asked by
California
Read all my Q&A
October 28, 2015
how much extra vertical space beyond the actual door height is required for the roller hardware and track ?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
ca
Read all my Q&A
Home Improvement Profile: DIYer
August 2, 2016
Answer: 
One inch for the track and 3/4" for the roller on top of the door. It really hangs very close to the ceiling, which is what I wanted. We attached a 2x2 to the ceiling because we wanted to make sure we hit studs, we hung sheets of plywood because we were going for 2 hanging "doors" to put shelves on in my pantry and wanted them to go floor to ceiling. We had to install a "track" on the floor to keep them Read More
One inch for the track and 3/4" for the roller on top of the door. It really hangs very close to the ceiling, which is what I wanted. We attached a 2x2 to the ceiling because we wanted to make sure we hit studs, we hung sheets of plywood because we were going for 2 hanging "doors" to put shelves on in my pantry and wanted them to go floor to ceiling. We had to install a "track" on the floor to keep them from swaying, but all we had to do was put a couple of strips of 1x2 on the floor to guide the panels. They work great and I have tons of storage hanging on them to keep things off the floor of my pantry. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-31 T01:48:32.222-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100658008, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 66ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.9 out of 5 by 10 reviewers.
Rated 5.0 out of 5.0 by Smooth Rolling This kit comes with all you need to have smooth rolling closet doors. All the parts are of excellent quality and were fairly easy to install. I would highly recommend this for anyone who is having door sliding issues. My doors were old, 1 inch thick ones from a homemade closet. They now roll effortlessly. I am very pleased! July 13, 2016
Rated 5.0 out of 5.0 by The sliding closet doors now open/close effortlessly and don't come off the track. Using this new track for the sliding closet doors at the bottom of the stairs in the basement. The doors were always coming off the previous "regular" track. It didn't help that my wife would throw empty boxes down the stairs that would knock the doors off the track. It was straightforward to install the new track and hang the doors. This is when I found out the wall and door frame were not vertical. The doors hung out over the threshold. But since there is more than enough margin for error with this track, I was able to adjust/install the bottom guides so that the doors fit in the opening and still moved extremely smoothly. I highly recommend this product. August 21, 2012
Rated 5.0 out of 5.0 by Heavy duty and easy to install I bought this to make a free standing sliding door in my pantry to use up the wasted floor space in front of my shelving. I placed them 6" apart and attached them to a 2x4 screwed into the ceiling joists/rafters to give plenty of support since I was planning on attaching shelves/baskets to the hanging doors. I used birch plywood 3/4" for the doors and this hardware worked perfectly for my mission. They are rated at 500#'s each so the food items will never exceed that weight limit even with the baskets. We put a track on the floor of 1x3" pine strips just to give it a guide and keep them from swinging. These are really sturdy and very easy to attach and hang the doors/panels. I'm thinking of using them to put a sliding door to my walk in closet instead of the bifold door I have there and making it more like a barn door. March 12, 2015
Rated 5.0 out of 5.0 by Excellent bypass door tracks These Johnson Products U shaped extruded aluminum rails- with their four contact ball bearing hangers- 2 per door- are far superior to the stamped sheet metal "off set" rails in every regard. They roll smooth as silk, hang perfectly vertical and and are easy to install. Mind the weight of your doors. This series (111SD) is for residential doors weighing 150 lbs or less which should be sufficient for any residential application. Excellent product and worth the special order from HD. March 28, 2016
Rated 5.0 out of 5.0 by Great product The track and hardware set are great. Our closet doors were always falling off and I decided to give this a try. The closet doors have not had a single problem or fallen off once. The only complaint is it is a little pricey. But, in my opinion, worth the money. April 19, 2016
Rated 4.0 out of 5.0 by Review of online purchase I received my order in very timely fashion. The product was as described in the ad. October 14, 2014
Rated 5.0 out of 5.0 by Better than expected Tracks were great quality, all hardware was included. Shipment arrived quickly and they worked out great for my cabinet doors. January 8, 2014
Rated 5.0 out of 5.0 by Why settle for a lousy sliding door when you can use this Johnson product? Quality product. I found two older doors at an architectural salvage yard and with these sliders, I have beautiful and incredibly sound closet doors. Easy to install as well. December 10, 2013
  • 2016-10-31 T00:15:18.126-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_10, tr_10
  • loc_en_US, sid_100658008, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms
  • REVIEWS, PRODUCT