Rated 4.7 out of 5 by 64
Rated 4.0 out of 5.0 by Ed Great product and easy install
The installation for a normal wall is very easy to do and the instructions are really good.
As the wall it was being used on was going to be tiled as a shower on the inside, I did have to add additional support on the inside wall of the pocket door system. I used 1x4/6 stock to attach to the side of the stock braces and then overlap the wider 1x6 pieces to 1x4/steel stuf combination for the equivalent of a 2x6 at each post. I attached the 1x4 with pocket screws to the Johnson stud and then a 1x6 that overlapped those on the inside. This only cost 3/4 inch of space in the shower area and made the inner wall almost as solid as the standard 2x4 wall beyond the pocket door area.
Overall VERY happy with their product, just make sure everything is exactly level and plum or your door will have issues.
September 7, 2016
Rated 5.0 out of 5.0 by oldmanhandyman Installed 2 1500 series Johnson Hardware 32 inch pocket door tracks
Project not finished but have installed 2 1500 door tracks- went up easily, appear well constructed but I have not hung doors yet. The cardboard boxy of one of the sets had been broken open in the store and when I started installation I realized 2 floor brackets were missing. I e-mailed Johnson, got a prompt response and 2 new brackets two days later in the mail. I will try to check back in with update when project completed.
August 9, 2016
Rated 5.0 out of 5.0 by DanB Very Satisfied - Great Product!
On a recent project, we converted our 4th bedroom into an extension of the Master bedroom walk-in closet. We used the Johnson Hardware Pocket Door Frame kit and it worked out great.
I installed a 28" pocket door, so I had to trim the header of the kit. I found the directions clear, and the kit already had the marks located showing where the cut needs to be depending on door size.
The hardware includes everything, even a small wrench for tweaking the angle of the door hang, to attain perfect alignment (though you really want your new header to be square).
The included roller bearings are very nice too.
I've included pictures showing day 1 project start, thru completion.
May 18, 2015
Rated 4.0 out of 5.0 by Rosie Worked out very well. Instructions are pretty straight forward and the video on the site really helped out a lot. Good Product
Pretty easy to install for the most part. Would buy again
May 17, 2016
Rated 5.0 out of 5.0 by MJF A fine product
Delivery was prompt, item was much sturdier and of greater quality than what I saw in the stores. Installation was also easy in a new wall (as opposed to existing wall).
July 12, 2015
Rated 5.0 out of 5.0 by DAE Better than most pocket door kits
This is a better quality product than similar door frames I considered. The metal clad studs prevented nails from protruding into the door cavity and prevented the studs from twisting. The door hanging hardware is strong enough for a solid 32" door. The instructions could be more clear that the metal stud length establishes header height.
April 30, 2016
Rated 5.0 out of 5.0 by Engineer Easiest way to install a pocket door!
After reading reviews of several pocket door kits I selected the Johnson 1500 Pocket door frame kit. Ordered from Home Depot and got quick FREE delivery to my home. One picture in the instructions could lead you to reverse the header channel during installation but otherwise the directions were very precise. Pocket door replaced inswinging regular door going into washroom. Existing 32" door really took up floor space in the small washroom and was a pain blocking area behind open door. Now it is like a much larger room. Heavy duty ball bearing rollers are slick!
Main reason to like this kit beside ease of installation, my wife LOVES it!
November 14, 2012
Rated 5.0 out of 5.0 by ScooterMike Quality product
After looking at several pocket door kits I decided on this one & was not disappointed.
April 5, 2016