Rated 4.5 out of 5 by 27
Rated 4.0 out of 5.0 by quilter good solid materials with easy instructions
product just what we wanted for country home's new bathroom to save space. looks great with our vintage, repurposed door.
July 5, 2016
Rated 4.0 out of 5.0 by Handywoman Smooth-gliding Space Saver
There is a gap of several inches between the toilet and wall in my small bathroom so I decided to try a sliding door. I'm more of a "it-doesn't-have-to-be-perfect-as-long-as-it-works" DIYer, and I really had to pay attention to the instructions on this one. It works really well and the door (which I got at Habitat Restore for $15) glides smoothly. My only nitpick is the cheap little plastic pieces that were included as guides for the bottom of the door. They're ridiculous. Overall, though, I'm really pleased with the result of this project, so I bought #204323529 Dark Oil-Rubbed Bronze Decorative Sliding Door Hardware to hang one of my bedroom doors.
March 22, 2015
Rated 5.0 out of 5.0 by Luigi This product has a smooth glide.
The wall mount track is well constructed and easy to install, with a smooth door glide. Although the instructions were hard to follow at certain steps, basic knowledge of door/hardware instillation made it easy to install. I would recommend this product to others and would use it for other applications in my home.
January 31, 2014
Rated 5.0 out of 5.0 by chicagirl No More Swinging Door!!!
I bought 3 72" sets on clearance at $25 each. I cannot believe what the original price is. I installed on for a guest bathroom door. I did have to cut the length by 12" but it was east since it's alluminum. I painted the door the color of the hallway walls on the outside and white on the inside. I installed a mirror and trimmed it out with low profile mosaic tiles to cover raw edge of mirror. I used a barrel bolt which I customized using a hacksaw and grinder to be able to lock door from inside of the bathroom. I removed the door stops and filled the original hinge mortises on the door frame. I cut the door casings at 90 degrees and used the door stops cut to length to bump the track out from the wall. The valance is made from bead board scrap I had and held on with velcro. This was also painted the wall color. The door is a hollow core door.
March 9, 2013
Rated 5.0 out of 5.0 by RASL This is a quality product!
I searched all over the internet and his product was the best for the price. The directions were clear and it was easy to put up. It's pleasing to the eye even without being painted or putting up a valence (which you can do). We left our track plain (see photo). The sliding door rolls like a dream and there is little chance dirt will accumulate in the track. I would definitely recommend this product.
November 8, 2012
Rated 4.0 out of 5.0 by TBRUST Looks great!
We really like this, we put it in a laundry room where having a swinging door was taking up too much space for our newly installed lockers. The instructions were really hard to read! Thank goodness my dad knows more that we do!
December 18, 2012
Rated 4.0 out of 5.0 by Diffel Nice & Functional
Good quality hardware. However, the directions for assembly are very hard to follow. If you are a contractor or a hard-core DIYer, you won't have much trouble, but others may have some problems following the directions.
July 21, 2015
Rated 4.0 out of 5.0 by stlarry good value
The kit was easy to install but required some ingenuity in placing it for the door in question, ie, have to take off the overhead trim and apply the correct dimension spacer. The bottom door guide is not adequate and needs additional guides, guiding to open stop.
May 12, 2015