Johnson Hardware 2610F Series 96 in. Track and Hardware Set for Wall-Mount Sliding Doors-2610F96H - The Home Depot

Johnson Hardware

Model # 2610F96H

Internet # 100657991

2610F Series 96 in. Track and Hardware Set for Wall-Mount Sliding Doors

Johnson Hardware 2610F Series 96 in. Track and Hardware Set for Wall-Mount Sliding Doors

This item has been discontinued.
The Home Depot no longer carries this specific product.

$136.95 / each


Model # 2610F96H

Internet # 100657991

Store SO SKU # 168533

This Johnson Hardware 2610F Series 96 in. Track and Hardware Set for Wall-Mount Sliding Doors is compatible with 48 in. wide doors weighing up to 200 lb. The set includes an aluminum track with convex rails and 3-wheel hangers for smooth, quiet operation.

  • Good for use with 48 in. door weighing up to 200 lb.
  • Box design helps prevent rollers from jumping the track
  • Convex rail enables single-point wheel contact for low resistance
  • Adjustable jamb-mount door guide effectively holds door in place without binding and ensures smooth door operation
  • Machine-turned and balanced wheels offer low roll resistance
  • Strong mounting flange holds track firmly to wall
  • Hangers are adjustable for door alignment
  • Heavy-gauge aluminum track is extruded for smooth operation
  • Detachable hanger plate for easy door installation or removal


Assembled Depth (in.)  3 in  Assembled Height (in.)  97 in 
Assembled Width (in.)  3 in  Maximum door height (in.) 
Maximum door thickness (in.)  1.75  Maximum door width (in.)  48 
Builders Hardware Product Type  Wall Mount Door Hardware  Door Type  Interior Slab 
Finish  Unfinished  Finish Family  Unfinished 
Material  Aluminum  Minimum door thickness (in.) 
Number of doors accommodated  Returnable  90-Day 
Track included  Yes  Weight load per door/panel (lb.)  200 
Warranty / Certifications
Manufacturer Warranty  Lifetime Guarantee 


Rated 4.8 out of 5 by 9 reviewers.
Rated 5 out of 5 by Easy to install, smooth operation. I purchased this hardware for my shed project where I needed a sliding door, not something that opened into my driveway. It is a tight space but this unit works perfectly. Easy to install and very smooth operation due to ball bearing rollers that can hold up to 400+ pounds. I built my door out of 1 x pine and a piece of T1-11 plywood siding. Heavy so I purchased larger bolts than were in the kit to hang the door. Thats why i only gave it 4 stars on quality. Could have provided bigger hanging bolts. November 15, 2013
Rated 5 out of 5 by good product shipped fast, all parts included,good quality made,instructions a little tricky,hanging door with rollers a two person job, but over all a great deal. December 19, 2014
Rated 5 out of 5 by Great Product! Excellent product and easy to install. Used the track and hardware to create pocket door in basement storage room where traditional door would not be feasible; simple to install and only required drilling into track for mounting on header - made it extremely easy to level and ensure door would not slide open/closed by itself. Bought 2nd set for door into workshop that was even easier to install because it was not pocket door setup - moved doorway opening and mounted door in a single day. June 10, 2014
Rated 5 out of 5 by Easy to install Came with all parts needed. Easy to install. The only thing I had to do was drill the holes in the track that attached it to the wall. October 22, 2013
Rated 4 out of 5 by It's just what I needed I used two of these tracks for 16 feet wide shed with two 4 feet wide doors. The 100 pound doors slide with great ease, but you must have the track level. My only complaint is the extremely small bottom guides provided for an eight foot long track. I made my own with two inch steel channel. February 7, 2012
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.