Message to Our Customers
Discontinued

Jorgensen

Model # 8511-2PK

Internet # 202737819

Store SKU # 947605

Cabinet Claw

This item has been discontinued.
The Home Depot no longer carries this specific product.

$24.97 /  each
Loading...

PRODUCT OVERVIEW

Model # 8511-2PK

Internet # 202737819

Store SKU # 947605

The cabinet claw is a unique tool which combines the multiple steps of face frame cabinet installation into one easy process. Using this clamp, face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp is in place. Clamp faces and alignment plate have a protective surface to protect the cabinet.

  • Works on stiles 1-1/2 ft. to 2 in.
  • Protective pads on jaws
  • 4 in. opening capacity
  • Pony

SPECIFICATIONS

Dimensions
Assembled Depth (in.) 
15.25 in 
Assembled Height (in.) 
3.5 in 
Assembled Width (in.) 
8.5 in 
Jaw Width 
2 in 
Throat Depth 
2 in 
Details
Clamp Type 
Screw 
Clamping strength (lb.) 
600 
Hand Tool Type 
Clamp 
Individual/Set 
Individual 
Material 
Steel 
Maximum Opening 
4 in 
Returnable 
90-Day 
Tools Product Type 
Hand Tool 
Warranty / Certifications
Manufacturer Warranty 
1 Year 

CUSTOMER REVIEWS

Rated 4.7 out of 5 by 23 reviewers.
Rated 5.0 out of 5.0 by You need to order two. the item # says "2PK" but their is only one in the pack. You need to order two. May 21, 2015
Rated 5.0 out of 5.0 by Well worth the money! Easy to use, makes it so much easier to get cabinet fronts flush. April 24, 2015
Rated 5.0 out of 5.0 by great product These clamps work great. I purchased two of these to use to clamp the cabinets together. Such a good idea. It holds your pilot bit in the center of the hole and then with out taking the clamp off you can move the little piece to run the screw in. It is also padded so it doesn't mark up your cabinets. It helps keep your screw straight so you don't come through the front of the cabinets, which pays for themselves because that would be terrible. December 17, 2014
Rated 5.0 out of 5.0 by Cabinet claw These clamps were awesome. Dont know how any person installing kitchen cabinets do without th em. They worked like a charm. Holding the cabinets together and then allows you to drill the hole and fasten them together. December 9, 2014
Rated 5.0 out of 5.0 by pony cabinet clamp this is a great product a must have for putting in kitchen cabinets the really helps holds things in place while fastening them together December 10, 2014
Rated 5.0 out of 5.0 by A bit expenseive, but what a time saver! I just finished my 4th kitchen remodel by helping my son. I had seen this clamps previously, but wasn't sure I wanted to pay what I thought was too much. However, from a time-saving stand-point, I think they just about paid for themselves. The clamps install easily, and work as they should. The only issue I had was that I had to move them to drill a deeper pilot hole and countersink the hole. That was not necessarily the fault of the clamps. With a longer bit, and using a screw that self-countersinks, that problem would have been avoided. October 22, 2013
Rated 4.0 out of 5.0 by Cabinet Clamps i have not used other cabinet clamps so have nothing to comapre them with. That said I think these did exactly what i expected. They made holding the cabinets in place very easy March 28, 2013
Rated 5.0 out of 5.0 by Worth it if you want to be precise These clamps were obviously designed by someone who installed cabinets a few times. The two directional clamping allows very precise flushing of cabinets and extension stiles. The drill guide does a great job of making sure you drill straight. The flip-up drill guide allows the screw to be fully driven without unclamping. Although a 1/8 inch drill bit is provided, it's really too short to drill through one stile into the next (my stiles are 1-1/2 inch wide). Between the drill chuck and the thickness of the clamp, you use up about an inch or so of drill bit length. I used a six inch drill with a stop to get the depth I needed. The clamps open up enough to get around a 1-1/2 inch stile and a 3 inch stile extension. If you need wider than that, more conventional clamps will have to be used. The price seemed a bit high to me but it these clamps allowed a beginner to get professional results. November 29, 2011
  • 2015-05-27T10:28:31.068-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_23, tr_23
  • loc_en_US, sid_202737819, prod, sort_default
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.