Rated 4.5 out of 5 by 31
Rated 4.0 out of 5.0 by adiron99 Shower Door
Instructions could have been a little better at describing orientation / relation of parts assembly.
Fine quality product upon completion. Approximate 2 hour assembly time.
May 3, 2016
Rated 5.0 out of 5.0 by jsd1961 Very nice shower door.
The shower door is very attractive and the "clean-coat" does seem to work as described.
October 26, 2014
Rated 5.0 out of 5.0 by Waylaben A good quality shower door
The instructions on the outside of box , said to verify measurements. I'm glad I did ,as I ordered the wrong size. The door was returned to Home Depot . I chose the Fluence K-702406-L-BH model, ( 34 X 65-1/2 in ) frameless pivot shower door with brass finish .
I discovered, every piece was packaged to prevent damage,when opening the shipping box. The bilingual installation guide had large drawings and diagrams, easy to understand. A required tool picture was included to prepare the assembler, before starting. There was no searching or guessing for screws and hardware, as they were organized in a Hardware skin pack. The (23) detailed installation steps were simple to follow. Any beginner handyman/woman would have no problem in completing the installation.
I had no problems in the assembly of door, except on step 14. The provided hex wrench for the #6 screws was a poor fit and cumbersome to use. I would suggest, using a better fitting hex wrench to install the screws. This was a minor inconvenience.
The simple but yet, quality engineered design of the unit, was easy to complete. I was extremely impressed with the quality, cost, and stylish of the shower door.
August 6, 2014
Rated 2.0 out of 5.0 by Johnno Not Impressed
The socket head screws are cheap and strip easily, I had to buy stainless steel philips head screws to use in their place. The sealing strip was cut too short from the manufacturer and I had to order a replacement. The gap at the bottom of the door allows water outside the shower; I confirmed the gap with the manufacturer and it is supposed to be there, why I don't know. I'm researching an alternate seal. The quality overall is OK, probably would have gone with something different.
August 16, 2011
Rated 5.0 out of 5.0 by LiberalGuy Precise but worth it
This is a quality product, and it was not immediately apparent how to put it in; however, in the end, it worked fine and wasn't that hard. I was concerned because the minimum width was stated at 31 1/4", and my opening was barely that. In fact, the door fit fine. Also, several people warned me to buy a diamond drill to drill through the tile. I did and it was worth it; I did not break any tile. The biggestchallenge was that the two jambs need to be absolutely parallel, and the tile had not been set very evenly. I used an angle grinder to cut a groove through a few of the tiles that were set too far out. Also, I bought longer screws and attached the jambs to the studs (I did not use the provided anchors). Once in, the door has become the focal point of our new bathroom and it looks great. PS: I do NOT have any particular carpentry skills, and I thought installation went fine.
April 30, 2011
Rated 5.0 out of 5.0 by lcmaine Looks lovely installed
If I could, I would deduct half a star for the tiny hex screws, and the inadequate Allen wrench included in the kit. If you are installing yourself, get a proper wrench to use. Read directions carefully and proceed slowly, but it is a do-able DIY project.
July 2, 2013
Rated 5.0 out of 5.0 by SoccerMom Very nice door.
This door is very sturdy and quite heavy duty. It was not an installation that just anyone could have done. It took my husband several hours to install and he is very comfortable with such things. He was very pleased with the amount of adjustments available with this door.
August 11, 2015
Rated 5.0 out of 5.0 by Chritaka Excellent quality and great value
The frame appears to be made of an alloy and appears fairly rigid and strong, so not cheap or plastic. There is also a coating on the inside of glass that beads the water to help keep it cleaner and easier to maintain. I was worried about fitting an opening exactly 31 1/4", but this model has enough adjustability to fit a little smaller than that. The adjustability of this model is excellent and turned out perfect. Be sure to read the instructions carefully before assembly and carefully level the wall jambs for a good seal. Parts are labeled well, which makes the job go smoother. The instructions are fairly accurate, but I did find one error about the size of screws to use in mounting the roller latches. It's no big deal since they were the only ones left, but the hex head of these did round out a bit during install. The finished door has the appearance of a custom door costing atleast 3x as much. Very solid and well constucted.
Door arrived sooner than expected also, about 6 days...thumbs up to HD as well on that.
August 3, 2009