Model # PU-11SN

Internet #203214259

KRAUS Pop-Up Drain with Overflow in Satin Nickel
0812679019708

KRAUS

Pop-Up Drain with Overflow in Satin Nickel

$34.95 /each
Color/Finish: Satin Nickel
  • Chrome
  • Satin Nickel

Frequently Bought Together

Product Overview

With clean lines and sturdy construction, KRAUS bathroom accessories provide everyday efficiency with style. Constructed from brass, the pop-up drain is designed to work with any above-counter vessel sink with overflow. For easy installation, all required rubber gaskets are included. Choose from four distinctive finishes to match your bathroom faucet and create a beautifully coordinated look.

  • Lead-free brass construction
  • Superior finish is corrosion and rust-resistant
  • Designed to work with above-counter vessel sinks with overflow
  • Fits standard 1.75 in. drain opening
  • All rubber gaskets included for installation
  • Limited lifetime warranty
  • Height: 7 in.
  • Diameter at top: 3 in.
  • Diameter at bottom: 1.25 in.
  • Flange diameter: 2.25 in.
  • Drain hole size requirement: 1.75 in.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

Pop-Up Drain with Overflow in Satin Nickel
Pop-Up Drain with Overflow in Satin Nickel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
2 answers

What is the measurement from the flange to the bottom of the treads?

This question is from Pop-Up Drain with Overflow in Chrome
Asked by
Plano, TX
Read all my Q&A
June 10, 2014
That is from the chrome piece that fits down into the the sink hole (not the top of the pop up stopper) to the bottom of the threads.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
June 17, 2014
Answer: 
Thank you for your question. The measurement from the flange to the bottom of the threads on the PU-11 is 3 3/4 inches long. Please contact us at 1(800775-0703 should you have any questions.
Have a nice day!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
FL
Read all my Q&A
June 10, 2014
Answer: 
I have the measurement at 3-3/8" as measured from the bottom of the flange to the bottom of the threads. I hope this helps.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-10-31 T16:53:15.535-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203214259, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 41ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 6 reviewers.
Rated 5.0 out of 5.0 by How to Stop the Leaks Love the drain but it leaked badly when I first installed it. After some research, I arrived at a method that works (I installed three of these the same way - no leaks). I used Oatey Stain Free Plumbers Putty and some Teflon Tape for the threads. The upper gasket that goes on the top side of the sink, coat both sides with Plumbers Putty. I included photos. Use Teflon Tape on the threads both where the nut goes and also where the tail pipe goes. Again, see the photos. This stopped all leaks. July 1, 2016
Rated 5.0 out of 5.0 by solid item It is all thick metal . Easy to install . You can tell it will last a long time. July 12, 2016
Rated 5.0 out of 5.0 by Great part, but requires a knack to install right The pop-up drain components were more than fine - all good there. The trick is in installation. Because it is an "overflow" sink, you have to be careful and conscious of how the water is handled. In my case it was important to ensure that the vessel sink was securely sealed to the granite counter, that I apply plumbers putty to the drain seal at the sink, and sufficient putty below the counter to make sure that I sealed the bottom sealing ring (to prevent water from the overflow from simply leaking out around the connection nut). Logically that all makes sense, but in practice it seems a little arcane (it shouldn't be that hard...). But all in all, it works great, looks great, no leaks, glad that I got it. April 15, 2014
Rated 2.0 out of 5.0 by Leaks Leaks Leaks Very nice quality but the photo on the side of the box and your web sight shows the concave washer pointing down when it should show it up, which caused myself and many others with constant leaking from the threaded area. You need to change box and your web sight photo's or add instructions. 2 hours of my life wasted. July 28, 2016
Rated 5.0 out of 5.0 by Beautifrul drain We had trouble getting it to seal in our Kohler sink. However, a little plumber's putty did the trick. September 23, 2014
Rated 1.0 out of 5.0 by Leaky drain, tried 2 of them and did everything :-( Leaking Drain, tried everything. Even installed two drains. September 22, 2015
  • 2016-10-31 T00:54:16.161-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_6, tr_6
  • loc_en_US, sid_203214259, prod, sort_default
1-6 of 6
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT