Klein Tools 6 in. Interchangeable Rapi-Driv Screwdriver-67100 - The Home Depot

Klein Tools

Model # 67100

Internet # 202922672

Store SKU # 869671

6 in. Interchangeable Rapi-Driv Screwdriver

Klein Tools 6 in. Interchangeable Rapi-Driv Screwdriver

This item has been discontinued.
The Home Depot no longer carries this specific product.

$12.67 / each


Model # 67100

Internet # 202922672

Store SKU # 869671

The 6 in. Interchangeable Rapi-Driv Screwdriver features a double-sided bit with 2 high-use tip sizes, a 3/16 in. slotted tip and #2 Phillips tip. The crank-action handle enables you to turn screws quickly with 1 hand, helping to reduce strain on your wrists. The cushion-grip handle offers comfort and torque.

  • Double-sided bit features high-use tip sizes - 3/16 in. slotted tip and #2 Phillips
  • Blast finish bit provides firm grip on fasteners to reduce cam out
  • Crank-action handle allows you to spin screws fast with 1 hand and helps reduce wrist strain
  • -/+ Dome mark for quick tool identification
  • Klein's cushion grip handle for good comfort and torque


Assembled Depth (in.)  2.25 in  Assembled Height (in.)  13.75 in 
Assembled Width (in.)  3.75 in  Handle length (in.)  3.75 
Shaft length (in.)  Tip size  #2 
Color Family  Black  Drive Style  Combination 
Hand Tool Type  Individual or Specialty Screwdriver  Handle Material  Plastic 
Individual/Set  Individual  Ratcheting  No 
Returnable  90-Day  Tools Product Type  Hand Tool 
Warranty / Certifications
Manufacturer Warranty  Klein Tools products, manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for the normal life of the product. 


Rated 4.4 out of 5 by 14 reviewers.
Rated 5.0 out of 5.0 by Ideal design Made for easy removable and installation of face plates on electrical outlets, works great!! February 19, 2015
Rated 5.0 out of 5.0 by Great tool! I was very happy to find this type of screwdriver! My husband was an electrician for many years and had one of these screwdrivers. Over the years and many moves later, it was lost. When I saw it, I knew he had to have it. The interchangeable tips makes this one even better than the first. It looks a little strange, but really takes the strain off of using a screwdriver for light use. Great for taking off switch plates, etc. December 30, 2014
Rated 1.0 out of 5.0 by Could've been, but... The quality of this screwdriver is above average, as far as screwdrivers - it is what it is. Although the manufacturer did get the center-line offset correct {CL of the handle in relation to the CL of the driven shaft}, a critical consideration for proper use; they failed in biblical proportions on the 1/4" hex socket - that which holds the 'bit'. The 'bit' as supplied is double-ended, 3/16" W blade for slotted screws at one end with a #2 phillips drive at the other; while this is presumably handy, it is actually a major hindrance. The problem is two fold: 1) the bit is held in the socket by friction from a spring-loaded ball - instead of the customary magnet, which makes using any other 'bit' almost not possible. Other common 1/4" hex bits do fit the socket but fall out if the driver is at any position below horizontal. 2) the supplied bit fits a limited number of fasteners. The 3/16" wide blade is too 'thick' for most common small screws, i.e. long threaded common wiring device screws used with outlets / switches. And, #2 phillips is more or less a useless term because there is practically no adherence to any standard. A stated size bit fits some but not many of the same declared size screws. Bits and screws vary so much, what one manufacturer says is phillips is more closely a reed prince or anywhere in between or just simply some fashion of a cross-slotted indention. This would have been a great product if the manufacturer would have given more thought to practical and useful purpose, instead of profit! December 15, 2014
Rated 5.0 out of 5.0 by Handy little dude for faceplates Very handy tool for screwing them slotted 6/32 screws on a faceplate cover in, also great for them square #1's. November 1, 2014
Rated 4.0 out of 5.0 by Great one handed screwdriver This is the handiest screwdriver I've seen in a while. Quick one handed operation is a breeze. My only complaint is the bits are held in place by a ball bearing. other bits will not stay in place. Haven't had time to see if they make other bits to use. October 21, 2014
Rated 5.0 out of 5.0 by I really like this product This is the product that is the best thing for cordless tool ever. October 21, 2014
Rated 5.0 out of 5.0 by Good for small screws Easy to use after just a few times using it. Very good quality. October 1, 2014
Rated 4.0 out of 5.0 by Wish I'd bought it sooner Love this thing overall. Makes installing outlets and switches faster and eliminates the need for a drill in most cases. Just a couple of criticisms ...it takes special bits with a retainer bearing on the side and a tight fitting screw will occasionally pull the bit out. Also wish it had a place to store different bits in the handle. September 2, 2014
  • 2015-03-29T11:14:52.851-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co-hasreviews, tv_14, tr_14
  • loc_en_US, sid_202922672, prod, sort_default
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.