Model # 11057

Internet #100352112

Store SKU #207074

Klein Tools Kurve Wire Stripper/Cutter for 20-30 AWG Solid and 22-32 AWG Stranded Wire
0092644740565

Klein Tools

Kurve Wire Stripper/Cutter for 20-30 AWG Solid and 22-32 AWG Stranded Wire

$19.97 /each

Frequently Bought Together

Product Overview

Klein Kurve . Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose, for easy bending, shaping, and pulling of wire. Coil spring provides fast self opening action. Handy closure lock for convenient storage. Screw-shearing holes for 6-32 and 8-32 screws. Precision-ground stripping holes for 20-30 AWG solid and 22-32 AWG stranded.

California residents: see   Proposition 65 information

  • Strips and cuts 20 - 30 AWG solid (.50 - .14 Sq. mm) & 22 - 32 AWG stranded (.34 - .05 Sq. mm)
  • Precision shear-type blades for clean cuts on solid and stranded copper wire
  • Easy-to-read markings on both sides
  • Curved handles help reach into confined areas
  • Made in the USA
  • Note: product may vary by store

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

Kurve Wire Stripper/Cutter for 20-30 AWG Solid and 22-32 AWG Stranded Wire
Kurve Wire Stripper/Cutter for 20-30 AWG Solid and 22-32 AWG Stranded Wire

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
2 answers

Can I strip rj45 cat6 stranded wire?

This question is from Kurve Wire Stripper/Cutter for 20-30 AWG Solid and 22-32 AWG Stranded Wire
Asked by
coamo, puerto rico
Read all my Q&A
February 6, 2015
Those are the small wires inside the 4-pair cat6 rg45.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 17, 2016
Answer: 
Yes. However, if you are using this for a computer the best way is to terminate the wire onto a jack rather than split the pairs onto screw terminals. Also, keep the twists as clost to the termination point as possible. I can't explain the physics of it, but the twist helps with communication.
Hope this helps!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 10, 2015
Answer: 
The Klein Tools Kurve Wire Stripper/Cutter #11057 strips and cuts 20 - 30 AWG Solid (.50 - .14 sq. mm) & 22 - 32 AWG Stranded (.34 - .05 sq. mm). The small wires inside the 4-pair cat6 cable are 22-24 AWG, so you should be able to strip them with this tool.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:56:24.839-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100352112, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • QUESTIONS, PRODUCT

Customer Reviews

Kurve Wire Stripper/Cutter for 20-30 AWG Solid and 22-32 AWG Stranded Wire is rated 4.6 out of 5 by 29.
Rated 5 out of 5 by from Excellent product, and definitely recommend I was looking for a wire stripper that would work for smaller gauge wires (28-30) and hesitated at first because i don't do a lot of wire stripping, but after using it, I now know why. I did not have this, and instead had some other cheap product. The ratcheting is smooth, the effort needed to squeeze to strip is really easy so if you had to do a lot of wire stripping, your hand won't get tired using this because the handle is soft, and the mechanism is made so you don't put a whole lot of effort in to using it. One of my favorite tools because it just plain works;
Date published: 2016-07-29
Rated 5 out of 5 by from Klein Tools Kurve Excellent tool. I would not expect less coming from Klein. Handles the smaller gauge wire handily.
Date published: 2016-12-06
Rated 5 out of 5 by from nice ergonomic handle, does a great job. had to replace my old ones so only had it about a week nice ergonomic handle, does a great job. had to replace my old ones so only had it about a week
Date published: 2016-11-09
Rated 4 out of 5 by from Worth the buy forsure This little guy comes in A lot of handy. A little floppy sometimes but gets the
Date published: 2016-09-27
Rated 5 out of 5 by from Good Striper Simple, easy to use with mark gauge to fit your wire size.
Date published: 2016-12-06
Rated 5 out of 5 by from An essential tool. There is no substitute for having a proper stripper when working with very small gauge wire. This tool is very accurately sized and precisely removed the insulation from the 32 ga and 24 ga wires I needed to work with. I highly recommend this tool for anyone who needs to work with wire gauges smaller than 20 gauge.
Date published: 2015-09-15
Rated 2 out of 5 by from Excessive gap between jaws I splurged and bought this to install some electronics on a boat: many small multi-stranded wires. At $20+, it was more than I'd like to spend, but heck it's a Klein tool, I'll have it forever! I was so disappointed when I used it. As it cut the insulation, it would bend the wire over and almost wedge it between the jaws. Closer examination revealed a significant gap between the jaws, probably .010-.015". I went to the store and examined the stock - huge variation. Some had the big gap like mine, and a few were very close, which is what I'd expect for a quality tool. If you gotta have it, cherry pick what's there, and I advise you to walk away if you can't find a good one.
Date published: 2016-06-23
Rated 5 out of 5 by from Great for Model Railroading Hobbiests Perfect for stipping 30 & 32 gauge wire used on DCC decoders in model railroad locomotives. Nice feel to the curved handle too.
Date published: 2012-08-23
  • y_2017, m_1, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_, sid_100352112, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • REVIEWS, PRODUCT