Model # 0204-1632

Internet #203950768

Store SO SKU #311533

Knape & Vogt 16 in. x 32 in. Diamond Plate Galvanized Steel Pegboard
0077355000214

Knape & Vogt

16 in. x 32 in. Diamond Plate Galvanized Steel Pegboard

  • Steel construction prevents board sagging
  • Will fit all standard peg hooks
  • All mounting hardware is included
$14.53 /each

Frequently Bought Together

Product Overview

The Heavy-weight diamond plated steel pegboard provides a striking and rugged location to store your workshop tools and supplies. Constructed of heavy duty galvanized steel, this pegboard prevents the sagging and tearing common in lighter duty solutions, while offering a corrosion resistant finish. The hole sizes and distances accommodate all standard peg hooks and accessories. Mounting screws are included, and installation into wall studs is recommended.

  • Heavy-duty galvanized steel construction with diamond plate stamped accents
  • Galvanized finish resists corrosion
  • 16 in. x 32 in. x 5/8 in. dimensions
  • Fits all standard or heavy-duty peg hooks and accessories
  • Mounting screws included
  • Peg hooks not included
  • Heavy duty construction prevents sagging and tearing

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Are the edges folded over to raise above wall

Asked by: bluegate
Yes, spaces it perfectly off the studs so you can use the whole board for hooks.
Answered by: mfriends
Date published: 2017-01-17

Will this sag in the middle if laid horizontally?

I'm trying to make an outdoor bar cart and was thinking of using this pegboard for the tops, since it would drain rain and snow (and spills) easily. However, would it bow in the middle if I did lay it horizontally (with supports)?
Asked by: Knightmiss
hmmm.... I don't know but I doubt it as it very sturdy.
Answered by: Wes
Date published: 2017-01-04

can the product be easily cut down?

mounted vertically 32" would be too tall.16" not tall enough
Asked by: Mike64
Think it could with metal cutting blade. They have raised edges, so you may want to consider a few washers under the cut edge when you install.
Answered by: JRretired
Date published: 2016-08-30

What guage steel is used?

I understand that the edges are folded over, but that leaves me unclear as to the gauge of steel. Please specify the gauge. Thank you.
Asked by: JackOfSeveralTrades
I don't know but is a sturdy piece.
Answered by: Wes
Date published: 2017-03-07
  • y_2017, m_3, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_, sid_203950768, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms
  • QUESTIONS, PRODUCT

Customer Reviews

16 in. x 32 in. Diamond Plate Galvanized Steel Pegboard is rated 4.5 out of 5 by 22.
Rated 4 out of 5 by from Good panel but needs care on installation Panel returns were a little flared in the back so that when butted against each other there was a gap at the front. Bent them back with pliers and made a better fit. Also need to be careful when attaching the panels with screws as too much pressure collapses the light gauge materials. Once installed they look great and work very well.
Date published: 2017-01-10
Rated 3 out of 5 by from Inexpensive. Compact Easy to install, corner holes not 16" on center but close enough to mount to studs. Only complaint is the thin sheet metal has enough spring that the straight hooks fall out easily, the tool racks/holders stay in place well enough.
Date published: 2017-01-18
Rated 5 out of 5 by from Perfect Just got the panels hung in the garage and am very pleased. 2 panels were used and the size is just right. The pegs fit and were easy to install. Looks like it is going to last a long time rain or shine. Thanks.
Date published: 2017-03-07
Rated 5 out of 5 by from Strong and sturdy I was skeptical about buying these steel pegboards. However, once I received them I was excited about the sturdiness. They are very easy to install and they look great. They are holding strong.
Date published: 2017-02-08
Rated 5 out of 5 by from This is amazing, looks cool in my well house/workshop. Very manly. Can be mounted either way, unl... This is amazing, looks cool in my well house/workshop. Very manly. Can be mounted either way, unlike the "other" metal pegboard. Why is this not stocked in the stores?
Date published: 2017-01-17
Rated 5 out of 5 by from Works great Its stong, sturdy and magnetic works great. It also came with the screws to mount it
Date published: 2017-03-07
Rated 5 out of 5 by from Perfect for my tools Just what it says. Worked great. Solid product. Great for hanging tools in garage.
Date published: 2017-01-24
Rated 5 out of 5 by from really nice, holds my hobby tools very well. I am getting a couple more. really nice, holds my hobby tools very well. I am getting a couple more.
Date published: 2017-01-03
  • y_2017, m_3, d_24, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_, sid_203950768, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • REVIEWS, PRODUCT