Rated 4.1 out of 5 by 142
Rated 5.0 out of 5.0 by Louie Best toilet flush valve
Easy to install and adjust, quiet operation, and no leaks! Do not use a wrench, hand tighten, but really get a really good finger grip!
September 6, 2016
Rated 3.0 out of 5.0 by CAPete Quiet, but not long-lasting, and little water-level adjustment.
I like the quiet fill, and installation is pretty straightforward -- but then I've had practice, as these only seem to last about 3 years (based on 3 failing so far, in two toilets; they get so they don't shut off all the way, and "seep"). Also they aren't very adjustable as to tank water depth. It appears there's no way to adjust the shut-off water level except by raising and lowering the whole top assembly, and to ensure the anti-siphon feature works (code requirement), you can't lower it far enough to have it shut off before the tank is within 3/4" of overflowing. I live in drought-stricken California, and would prefer to use less water. But in spite of this design problem, I keep getting them. They *are* quiet. But next time maybe I'll go back to the old float-on-a-long-metal-arm type, if I can find one. They're easily adjustable.
August 21, 2016
Rated 5.0 out of 5.0 by 1Eaglesfan Works great
Bought online.... arrived on time... works great. No more overflowing toilet
August 16, 2016
Rated 2.0 out of 5.0 by keith Short life
I installed one and it lasted about a year. I replaced it with the same model Korky fill valve. The second on lasted not much longer than the first one. Toilet keeps filling and I confirmed it wasn't the flapper by installing a new flapper before replacing the full valve. I switched to Fluidmaster brand which has a more traditional style float.
July 23, 2016
Rated 5.0 out of 5.0 by jrb Easy installation and quiet operation.
I got this flush valve to replace an old one that would take it upon itself to run for a few seconds several times daily. Installation was pretty straightforward, as is common when replacing plumbing parts the hardest part was removing the old valve. A feature I really like is the tank level adjustment, which is the easiest one I've seen yet. Instead of having to bend rods or fool with an adjusting screw, you simply turn the installed valve about 1/8 turn and move it up to down to adjust the water level. Turn in the opposite direction and the valve is locked! This valve is also very quiet compared to others I have used, first flush I thought I hadn't turned the water on, it was so quiet.
November 28, 2015
Rated 1.0 out of 5.0 by Egbert i give up!
Well... it started out ok... but after about two weeks, I noticed an annoying "squeak" right when the device shut off after the tank was full. Now about two months later, i notice a similar "squeak" once the water starts to go down after a flush. What IS this??? The "Quiet Fill" part still holds true, as the water fills the tank with little noise, but the "squeak" at the end... is unbearable!! I guess I'll just replace this device with something else. That's $11 I'll never see again, but I'm glad that it was ONLY $11!
June 25, 2016
Rated 5.0 out of 5.0 by oldhomefixer Adjustable Height Fill Valve
I have an old Case toilet that I refurbished. Case went out of business decades ago and parts are expensive. The tank is only 10 inches tall and I needed an adjustable valve. I 'Watney'd' the tank with my Dremel, installed this, and it works great.
December 30, 2015
Rated 4.0 out of 5.0 by Redhead Works great! MADE IN THE USA!
This fill valve is very quiet and very easy to install. The height easily adjusts from 7 3/4" to 13 1/2" to fit most all toilets. Fits all two piece toilets and most one piece toilets. There is an internal float that makes installation easier, takes up less room in tank, no float sliding up and down or getting in the way. Also, has a strainer within it to catch sand and sediment for a longer life. It has a twist-lock adjustment for easy installation. This valve is recommended for problems with running toilet, noisy toilet, no or slow refill, no or weak flush, or too much/too little water in the bowl. It is an anti-siphon design. This valve is made of plastic but seems to be high quality, durable material. Made in the USA!!! 5 yr warranty. Go to www.korky.com for more info and installation video.
November 22, 2015