Model # KSTK1

Internet #203225420

Store SO SKU #600695

LG Electronics 3-Piece Dryer 27 in. Stacking Kit
0048231013024

LG Electronics

3-Piece Dryer 27 in. Stacking Kit

  • Space saving solution
  • Appliances stack vertically
  • Neutral chrome color
$35.00 /each

Frequently Bought Together

Product Overview

The LG KSTK1 Stacking Kit lets you stack a LG 27 in. front load dryer on top of a LG 27 in. front load washer, saving you space in your laundry area. Complete installation instructions walk you step-by-step through the installation. Chrome color to complement all LG color laundry pairs.

  • For use with LG 27 in. washer and dryers
  • Chrome color works with all LG washer and dryer pairs
  • Contains all parts needed to stack the dryer on top of the washer
  • Detailed installation guide is included for convenience
  • Installation is not included in purchase price

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

lg stacking it, will it fit an older model washer?

Hi, I have a WM2496HWM washer and DLE9577wm dryer. Can I use this stacking it. It used to be stacking kit wstk1 but they don't make this one anymore. Thank you.
Asked by: lisa
worked fine with mine, which was another 27" LG. Washer is about 2 years old
Answered by: Mingus
Date published: 2016-09-20

Will the LG stacking kit KSTK1 work for the LG 25" model DLEC855W?

I cannot seem to find out anywhere what stacking kit to use for the compact LG front loader washer and dryer.
Asked by: Shasta
Good question, but according to the LG site, the DLEC855W comes WITH a stacking kit, so you don't need to purchase one. The question is, what other unit are you stacking it with? If it's the same size, it should work. Calling LG...best way to go.
Answered by: LarryS
Date published: 2015-09-20

Can you stack a gas dryer?

Asked by: Anonymous
Yes, this kit can be used to stack a gas dryer on the washing machine
Answered by: LosRubios
Date published: 2016-11-22

Do the stacking washer and dryer have to be the same brand?

Asked by: Anonymous
Yes--there are other models for other brands.
Answered by: caroll
Date published: 2016-12-22
  • y_2017, m_2, d_26, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_49
  • loc_, sid_203225420, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • QUESTIONS, PRODUCT

Customer Reviews

3-Piece Dryer 27 in. Stacking Kit is rated 4.6 out of 5 by 94.
Rated 5 out of 5 by from Very easy to install kit for putting an LG dryer on top of an LG washing machine. We recently pic... Very easy to install kit for putting an LG dryer on top of an LG washing machine. We recently picked up a new LG washer and dryer in the Thanksgiving sales and since we have a laundry closet, we needed a kit to stack them. This LG stacking kit is very easy to install and allowed us to get the dryer and washer into a closet with a 79" high doorway. There are a couple of bits of advice for making the job as easy as possible: 1) The plastic feet on the dryer have a hexagonal shape and you need to make sure that the 'flat' of the hexagon is aligned with the rear and front retainers of the stacking kit otherwise the dryer won't seat all the way back and the front retaining bar screw holes won't align properly. Make sure they dryer feet are aligned before you life the dryer onto the washer - see the close up picture in this review. 2) It pays to 'test fit' the front retaining bar before you attempt to lift the dryer in place as the screw holes are a little small and this means you have to drive the screws in carefully with quite a lot of pressure to avoid stripping the heads. Test fitting it and then disassembling the retaining bar meant the screws went into place much more easily when the dryer was lifted into place.
Date published: 2016-11-21
Rated 4 out of 5 by from Does the job! Works as described. Definitely, a two to three man job. Downside for me was the screw holes on the brackets where smaller than the screws that where provided. Thankfully I had same screws just a hair smaller that fit properly. :-) Only color choice was chrome, which was ok for my application. I have been using bracket kit for a couple weeks now and no problems.
Date published: 2013-02-20
Rated 5 out of 5 by from Good option I bought this and it worked as advertised. Zero issues. Good construction. Really creates a great deal more room in the laundry area having the machines stacked. For those of you who are vertically challenged, the dryer knobs will be just over 6 feet in the air. You might need a one step stool to reach them. My wife is 5 foot 1 and does NOT need one (just barely).
Date published: 2014-01-28
Rated 5 out of 5 by from Easy to use and set- up. The kit is very simple an quick to set-up. The stacked units look great. A great way to save space.
Date published: 2013-03-29
Rated 5 out of 5 by from It all makes sense! The washer and dryer were joined as one! The don't rock and they don't roll. No shakes and no rattles.
Date published: 2013-04-02
Rated 4 out of 5 by from Does what it's supposed to do My only complaint is the price for three pieces of sheet metal. Apart from that, it's great. Easy to install and place the dryer in it. The dryer hardly shakes at all -- though, that probably has more to do with the washer than the stacking kit.
Date published: 2016-03-22
Rated 5 out of 5 by from A simple and easy to use system for stacking washer and dryer. 3 Piece stacking kit provided an easy to use bracket system to secure the dryer to the top of the washer. It held the machines in place reliably even during spin cycles . We later unstacked the machines to run them side by side with no damage caused to either machine by the kit.
Date published: 2015-12-22
Rated 5 out of 5 by from Actually purchased for Kenmore I bought this for my Kenmore washer, it took some research but I found out LG actually made it.
Date published: 2015-10-21
  • y_2017, m_2, d_27, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_94
  • loc_, sid_203225420, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT