Rated 4.0 out of 5 by 4
Rated 5.0 out of 5.0 by jess Works Great
I needed to cut a piece of 0.09" acrylic into many different shapes and this worked perfectly. I didn't think it would work but it did the job good.
January 18, 2016
Rated 5.0 out of 5.0 by leictreonaic Great Tool When Properly Used
I had to cut a piece of 1/4" acrylic. I researched the best way to cut and found one of these tools would do the job. The instructions on the package say it will cut up to 1/4" acrylic and that is what I wanted to cut.
You need to clamp a straight edge on top of the acrylic down to a surface with a 90 degree straight edge. The straight edge and clamping surface edge needs to span all the way across the piece you are cutting. The straight edge on top lines up with your cut line and the edge of the clamping surface under the acrylic. Once you have this set up you can begin scoring. It may take more than a few passes to score it enough. The blade is V-shaped so it will slowly strip off the acrylic and make a small v-groove into it. You must get at least half way through the acrylic before trying to snap the rest off. If everything stays clamped in place and you strip the acrylic v-groove more than half the thickness the rest will snap right off. Then you can sand the edge a bit to clean it up if you want to. I did this with this tool and it worked perfect. Great Tool !
October 7, 2012
Rated 1.0 out of 5.0 by chris don't recommend
Not working well. I had to return it.
I don't recommend this item.
August 17, 2015
Rated 5.0 out of 5.0 by Verified Reviewer Cutting tool works
I used this tool to score a 1/4 in. thick sheet of acrylic. The tool worked well for this job.
November 11, 2014